The aim of this study was to fabricate mini-tablets of polyhedrons containing theophylline using a fused deposition modeling (FDM) 3D printer, and to evaluate the correlation between release kinetics models and their geometric shapes. The filaments containing theophylline, hydroxypropyl cellulose (HPC), and EUDRAGIT RS PO (EU) could be obtained with a consistent thickness through pre-drying before hot melt extrusion (HME). Mini-tablets of polyhedrons ranging from tetrahedron to icosahedron were 3D-printed using the same formulation of the filament, ensuring equal volumes. The release kinetics models derived from dissolution tests of the polyhedrons, along with calculations for various physical parameters (edge, SA: surface area, SA/W: surface area/weight, SA/V: surface area/volume), revealed that the correlation between the Higuchi model and the SA/V was the highest (R² = 0.995). It was confirmed that using 3D- printing for the development of personalized or pediatric drug products allows for the adjustment of drug dosage by modifying the size or shape of the drug while maintaining or controlling the same release profile.

Dry-powder inhalers (DPIs) are valued for their stability but formulating them is challenging due to powder aggregation and limited flowability, which affects drug delivery and uniformity. In this study, the incorporation of L-leucine (LEU) into hot-melt extrusion (HME) was proposed to enhance dispersibility while simultaneously maintaining the high aerodynamic performance of inhalable microparticles. This study explored using LEU in HME to improve dispersibility and maintain the high aerodynamic performance of inhalable microparticles. Formulations with crystalline itraconazole (ITZ) and LEU were made via co-jet milling and HME followed by jet milling. The LEU ratio varied, comparing solubility, homogenization, and aerodynamic performance enhancements. In HME, ITZ solubility increased, and crystallinity decreased. Higher LEU ratios in HME formulations reduced the contact angle, enhancing mass median aerodynamic diameter (MMAD) size and aerodynamic performance synergistically. Achieving a maximum extra fine particle fraction of 33.68 ± 1.31% enabled stable deep lung delivery. This study shows that HME combined with LEU effectively produces inhalable particles, which is promising for improved drug dispersion and delivery.

Background: Fexofenadine hydrochloride (FEX) is widely used to treat allergic rhinitis. However, poor solubility, high cohesiveness, and risk of polymorphic transformation present significant formulation challenges. Conventional FEX tablet formulations are large and may pose swallowing difficulties for patients with dysphagia. Therefore, a miniaturized FEX tablet that maintained bioequivalence with the marketed product was developed. Methods: An organic solvent-based binder and porous carrier enhanced solubility, flowability, and process efficiency. The formulation was optimized using a design of experiments approach to assess the effects of tablet size and porous carrier incorporation on dissolution and residual solvent content. Scale-up feasibility was evaluated using Froude number-based process optimization, and stability studies were conducted under accelerated conditions (40 °C and 75% relative humidity) to ensure long-term formulation robustness. Results: The miniaturized tablet exhibited dissolution at pH 4.0 and pH 6.8 equivalent to that of the reference product, whereas a faster dissolution rate was observed at pH 1.2. No significant changes were observed in the dissolution rate, crystalline structure, or impurity levels over six months. An in vivo bioequivalence study demonstrated that the test formulation met the bioequivalence criteria, with 90% confidence intervals for the area under the curve and the C_max falling within the regulatory acceptance range. Conclusions: A miniaturized and commercially viable fexofenadine hydrochloride tablet was developed (44% weight reduction and 50% volume reduction compared to the marketed product). The organic solvent-based binder and porous carrier system improved manufacturing efficiency, stability, and solubility, thereby ensuring compliance with regulatory standards. These findings provide valuable insights into size reduction, solubility enhancement, and large-scale production strategies for the development of future pharmaceutical formulations.