Cenk Kaya

Dr. Cenk Kaya

Marine Engineering, Istanbul Technical University, Istanbul, İstanbul, Turkey (Türkiye)
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 July 2023 in International Journal of Hydrogen Energy
Verified
Journal Article
Closed access
Cenk KayaCenk Kaya
Cenk Kaya
JÖJülide Hazal Özdemir
Jülide Hazal Özdemir
HEHüseyin Elçiçek
Hüseyin Elçiçek
OÖOğuz Kaan Özdemir
Oğuz Kaan Özdemir
GKGörkem Kökkülünk
Görkem Kökkülünk
Kaan ÜnlügençoğluKaan Ünlügençoğlu
Kaan Ünlügençoğlu

16 June 2020 in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
Verified
Journal Article
Closed access
Cenk KayaCenk Kaya
Cenk Kaya
GKGörkem Kökkülünk
Görkem Kökkülünk
The use of fossil-based fuels in internal combustion engines has become a major challenge and faces with serious transformation regarding emissions. Herein, alternative fuel usage becomes prominent, thanks to a great reduction of these emissions. In this study, using 20% (B20), 50% (B50), and 100% (B100) of waste frying oil biodiesel (WFOB)–diesel blends has been experimentally and theoretically investigated on emission and performance parameters at full load conditions of 1,500–3,000 rpm ranges in the diesel engine. According to the experimental results, it has been shown that torque has not changed significantly, but brake specific fuel consumption enhanced up to 12.98% owing to the lower heating value of biodiesel. In terms of emissions, biodiesel fuels reveal different results. Whereas HC, CO2, and NOx slightly increase with B100, all emissions almost reduce with B20, including NOx and smoke opacity. Maximum reductions of B20 are obtained as 4.51% in CO2, 29.27% in CO, 39.06% in HC, 6.52% in NOx, and 25% in smoke opacity emissions. In compliance with theoretical results, usage of biodiesel reduces exergy destruction rate as up to 7.03% and increases exergetic efficiency as up to 5.86% compared to neat diesel except 2,700–3,000 rpm. Consequently, the small addition of waste frying oil biodiesel as 20% is an optimum solution under favor of minimum increase of specific fuel consumption and reduction in all emissions.

29 August 2024 in Hydrogen
Verified
Journal Article
Open access
PDF file
Cenk KayaCenk Kaya
Cenk Kaya
Hydrogen (H2) storage is one of the most problematic issues regarding the widespread use of hydrogen, and solid-state hydrogen storage materials are promising in this regard. Hydrogen storage by sodium borohydride (NaBH4) takes attention with its advantages and idiosyncratic properties. In this study, potentials and challenges of sodium borohydride are evaluated considering storage conditions, safety, hydrogen purity, storage capacity, efficiency, cost, and the maturity. Moreover, marine use of NaBH4 is demonstrated, and the pros and cons of the NaBH4 hydrogen storage method are stated. According to evaluations, whereas advantages can be sorted as fuel availability, fuel recyclability, mild storage conditions, exothermicity of reaction, pressure flexibility, and H2 purity, challenges can be sorted as high costs, catalyst deactivation, regeneration, and practical/technical implementation issues. The great potential of NaBH4 marine use (against road/aerial vehicles) is water availability, no need to carry all the required water for the entire journey, and reduced system weight/volume by this way.

3 September 2020 in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
Verified
Journal Article
Closed access
Cenk KayaCenk Kaya
Cenk Kaya
ZAZafer Aydin
Zafer Aydin
GKGörkem Kökkülünk
Görkem Kökkülünk
ASAykut Safa
Aykut Safa
The goal of this study is to investigate the use of compressed natural gas in a diesel engine compared to diesel fuel, according to exergetic and exergoeconomic analyzes. For this purpose, compressed natural gas (CNG) injector has been mounted to intake manifold and small, single cylinder diesel engine was converted to dual mode. Experiments have been carried out according to ISO 8178 E2 test cycle, at maximum power and four different load as 25%, 50%, 75%, and 100%. CNG ratios were chosen as 0%, 20%, 40%, and 60% percentages as energy content. Exergetic and exergoeconomic analyses were executed to results considering capital, operation-maintenance, fuel and environmental damage costs. According to results, diesel fuel has superiority than CNG fuels except full load. In these loads, with using CNG, exergetic efficiency and exergoeconomic factor reduces as up to 38.3% and 32.8%, and also exergy destruction percentage, lost exergy rate and specific cost of shaft work exergy unit increases as up to 10.8%, 74.8%, and 41.7%, respectively. Besides CNG fuels need to improve lower load conditions performance, CNG20 has the favorable exergetic results at full load. According to environment related cost results, remarkable cost of UHC affects negatively to CNG fuel results at 25% and 50% loads. Last of all, CNG20 is preferable at 75% load and all CNG fuels are preferable at full load conditions according to total cost flow rates against diesel.

27 May 2022 in Ships and Offshore Structures
Verified
Journal Article
Closed access
ABAnıl Bekdaş
Anıl Bekdaş
Cenk KayaCenk Kaya
Cenk Kaya
GKGörkem Kökkülünk
Görkem Kökkülünk
Although there are some studies on the impact of Sulphur 2020 on shipping in the literature, large-scale economic analyses are scarce. For this reason, in compliance with sulphur abatement, this study aims to determine the most economical alternatives for shipping companies. First, real data are collected from the maritime industry and scenarios are created regarding different ship types, engine powers, sailing times and fuel prices. In conclusion, using very low sulphur fuel oil alternative for dry cargo ships, hybrid scrubber alternative for crude oil tankers, open-loop scrubber alternative for container ships and hybrid scrubber for Ro-Ro ships are found as economically beneficial in most cases. Last of all, the break-even time from low sulphur fuels to scrubber types is presented to guide shipowners in finding the best alternative with respect to ship ages.

30 October 2020 in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
Verified
Journal Article
Closed access
FOFatih Okumuş
Fatih Okumuş
Cenk KayaCenk Kaya
Cenk Kaya
GKGörkem Kökkülünk
Görkem Kökkülünk
The use of WDEF (water-diesel-emulsified fuel) has been one of the effective methods used for NOx (Nitrogen oxide) reduction without any modification on engine. In the present study, firstly, the potential of emulsified fuel on performance of engine parameters has been determined. In the experiments; pure diesel, 5%, 10% and 15% water content have been prepared and tested at rated power and torque conditions. As a result of experiments, a slight reduction of up to 5.22% in brake power is observed for maximum torque, also increase up to 7.42% in BSFC (Brake-specific fuel consumption) is attained while using emulsified fuel. However, a leading emission problem of diesel engine, the highest reduction in NOx emissions is obtained as 16.84%. For maximum power, a slight reduction up to 5.46% in brake power has been observed, also increase up to 8.96% in BSFC is acquired comparing with pure diesel. The highest decrease in NOx emissions has been achieved 10.8% by using WDEF. As a result of theoretical study, 10% emulsified fuel has been determined as the optimum fuel blend with the use of Fuzzy-AHP (Analytic hierarchy process) and CODAS (Combinative distance-based assessment) regarding experimental results of brake power, torque, brake specific fuel consumption and NOx emissions. The effects of the optimized fuel on performance of engine parameters and NOx emissions have been examined by one dimensional thermodynamic simulation, AVL Boost, and the results are compared with experimental data. The theoretical results have a good agreement with experimental data.