A direct yaw moment control (DYC) for energy-efficiency and a DYC for stability of electric vehicles (EVs) are proposed. The DYC for energy-efficiency is active during non-safety-critical cornering manoeuvres to improve the energy-efficiency of EVs. The DYC for stability is active during safety-critical manoeuvres to keep the vehicle stable. A combination of the DYC for energy-efficiency and the DYC for stability is studied. A stability judgement based on the yaw rate and slip angle is designed for evaluating the criticality of the vehicle's working state. A switching principle for alternating between the DYC for energy-efficiency and the DYC for stability is designed. During non-safety-critical cornering manoeuvres, it is shown that the DYC for energy efficiency can save considerable percentage of energy compared to both equal torque driving and the DYC for stability. During cornering manoeuvres containing both non-safety-critical parts and safety-critical parts, the simulation results in this work show that the combination of the DYC for energy-efficiency and the DYC for stability can give 12% to 18% energy savings compared to the DYC for stability only for the vehicle and manoeuvres studied.

Actively controlling the camber angle to improve energy efficiency has recently gained interest due to the importance of reducing energy consumption and the driveline electrification trend that makes cost-efficient implementation of actuators possible. To analyse how much energy that can be saved with camber control, the effect of changing the camber angles on the forces and moments of the tyre under different driving conditions should be considered. In this paper, Magic Formula tyre models for combined slip and camber are used for simulation of energy analysis. The components of power loss during cornering are formulated and used to explain the influence that camber angles have on the power loss. For the studied driving paths and the assumed driver model, the simulation results show that active camber control can have considerable influence on power loss during cornering. Different combinations of camber angles are simulated, and a camber control algorithm is proposed and verified in simulation. The results show that the camber controller has very promising application prospects for energy-efficient cornering.

An active energy-efficient direct yaw moment control (DYC) for in-wheel motor electric vehicles taking motor efficiency maps into consideration is proposed in this paper. The potential contribution of DYC to energy saving during quasi-steady-state cornering is analysed. The study in this paper has produced promising results which show that DYC can be used to reduce the power consumption while satisfying the same cornering demand. A controller structure that includes a driver model and an offline torque distribution law during continuous driving and cornering is developed. For comparison, the power consumption of stability DYC is also analysed. Simulations for double lane change manoeuvres are performed and driving conditions either with a constant velocity or with longitudinal acceleration are designed to verify the effectiveness of the proposed controller in different driving situations. Under constant velocity cornering, since the total torque demand is not high, two rear wheels are engaged and during cornering it is beneficial to distribute more torque to one wheel to improve energy efficiency. In the simulated driving manoeuvres, up to 10% energy can be saved compared to other control methods. During acceleration in cornering, since the total torque demand is high, it is energy-efficient to use all the four in-wheel motors during cornering.