Jidong Lu

Dr. Jidong Lu

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 February 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JLJidong Lu
Jidong Lu
SYSatoshi Yamane
Satoshi Yamane
WWWeixi Wang Wang
Weixi Wang Wang
NLNing Li
Ning Li
SWSiqi Wang
Siqi Wang
XYXIA YUXIONG
XIA YUXIONG
Plasma arc welding can achieve high-quality welding joints in high-strength manufacturing fields, such as aviation and automotive, and improve production efficiency. It is important to observe the weld pool state in real-time in robot automatic welding. However, the electrodes of the plasma welding torch cannot be observed from the outside. Teaching the weld line to torch in real-time to be observable to humans will be difficult. Also, it is difficult to process the image to obtain the position of the weld line in K-PAW. In this study, a camera was utilized to observe the weld pool. The authors estimate the weld line position in real time by image processing based on U-Net prediction. The U-Net model demonstrates sufficient prediction where the accuracy reached 99.5% for the training data and 96.5% for the test data recognition. Moreover, a control method utilized weld line position estimated from the boundary area to verify the effectiveness of this prediction model from 3 mm within the deviation of 1 mm, which is within the range of permissible welding errors. It could reduce image processing errors in the weld pool image and provide higher recognition accuracy than image processing. Combining vision sensing technologies and deep learning methods will provide new technologies to enable higher welding precision and improve welding quality. It could also accelerate the development of welding technology in the intelligent manufacturing field.

13 August 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
YLYuxi Luo
Yuxi Luo
SYSatoshi Yamane
Satoshi Yamane
WWWeixi Wang Wang
Weixi Wang Wang
RTRei Tsumori
Rei Tsumori
KOKohei Ochiai
Kohei Ochiai
XYXIA YUXIONG
XIA YUXIONG
While modern power sources have improved process stability, real-time monitoring and feedback control remain essential for ensuring consistent weld quality under dynamic conditions. To address this need, a vision-based closed-loop control system was developed for pulsed Metal-Active Gas (MAG) welding. The system dynamically adjusts the welding speed based on real-time visual feedback in the welding process. Otsu thresholding combined with morphological operations was applied to molten pool images for brightness-based feature extraction. These features, representing the dynamic behavior of the molten pool, were incorporated into a feedback loop for real-time control. Without relying on complex model-based prediction or sensor fusion, the proposed method reduces fluctuations in weld bead geometry and lowers the occurrence of defects. The experimental results showed that, under optimized control conditions and after a steady welding state was achieved, the weld bead’s height deviation exhibited an average standard deviation of 0.08 mm, and a process stability rate of 92%. The combination of conventional hardware and straightforward image processing makes the proposed approach practical for industrial implementation.

6 August 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
HPHualin Peng
Hualin Peng
MDMeirong Dong
Meirong Dong
HLHongchuan Liu
Hongchuan Liu
ZHZhehua Huang
Zhehua Huang
JLJidong Lu
Jidong Lu
Photothermal catalytic hydrogenation of carbon dioxide provides an effective strategy for the high-value utilization of carbon resources. Under photothermal conditions, active metals play a crucial role in regulating reaction pathways, thereby determining catalytic activity and product selectivity. In this work, Ni/CeO2 and Cu/CeO2 catalysts were synthesized using a Ce-UiO-66 metal-organic framework (MOF) as the precursor via an in situ impregnation method. The effects of these two active metals on the reaction pathways of CO2 hydrogenation under photothermal conditions were systematically compared, and the underlying mechanism governing the selectivity toward CO2 methanation and the reverse water-gas shift (RWGS) reaction was elucidated. The results demonstrate that Ni/CeO2 exhibits outstanding low-temperature methanation activity under photothermal conditions, achieving a CO2 conversion of 68.91% and a CH4 selectivity of 91.11% at 300 ℃, while reducing the optimal reaction temperature by approximately 100 ℃ compared with thermal catalysis. As the reaction temperature increased, the dominant reaction pathway gradually shifted from methanation to the RWGS reaction, exhibiting pronounced temperature-dependent behavior. In contrast, Cu/CeO2 predominantly catalyzed CO2 hydrogenation to CO via the RWGS pathway. Although photothermal coupling further enhanced its catalytic activity, the promotional effect was less significant than that observed for Ni/CeO2. Overall, different active metals regulate the interfacial electronic structure and charge-carrier behavior under photothermal conditions, thereby modulating CO2 activation and the adsorption and conversion of key reaction intermediates, ultimately enabling controllable regulation of reaction pathways and product selectivity. This study provides new insights into the structure-activity relationship of MOF-derived metal/CeO2 catalysts for photothermal CO2 conversion.

29 October 2024 in Research Square
Verified
Preprint
Open access
PDF file
JLJidong Lu
Jidong Lu
SYSatoshi Yamane
Satoshi Yamane
WWWeixi Wang
Weixi Wang
NLNing Li
Ning Li
SWSiqi Wang
Siqi Wang
YXYuxiong Xia
Yuxiong Xia
Plasma arc welding (PAW)can achieve high-quality welding joints in high-strength manufacturing fields such as aviation and automotive and improve production efficiency. The plasma keyhole arc welding(K-PAW) can be used for butt welding in thick plates since the plasma arc is more concentrated than Metal Active Gas (MAG) welding. The weld pool can effectively reflect the welding melt state. To make robot automatic welding, it is important to observe the weld pool in real-time. The K-PAW will be stable to ensure the welding quality if the weld line can be taught accurately. However, the electrodes of the plasma welding torch cannot be observed from the outside. Teaching the weld line to torch in real-time from human sight will be difficult. In this study, the Complementary Metal-Oxide-Semiconductor (CMOS) camera fixed on the welding torch with an interference filter was utilized to observe the weld pool. Estimate the weld line position in real-time by image processing techniques based on deep learning. The control of seam tracking was performed to avoid misalignment using the weld line position. Specifically, the authors employed the U-Net autoencoder, a deep learning technology to create a training model and then used the training model to detect the boundary area from the weld pool image observed by a camera in the welding process. The model demonstrates sufficient prediction which the accuracy reached 99.5% for the training data and 96.5% on the test data recognition. Moreover, the authors discussed a control method that utilized weld line position estimated from the boundary area to verify the effectiveness of this prediction model from 3mm within the deviation of 1 mm in controlling process. It is important to improve the quality of KAW welding in this study. Combining vision sensing technologies and deep learning methods will provide new technologies to enable greater welding precision and improve welding quality. It could also accelerate the development of welding technology in the intelligent manufacturing field.

12 May 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
XYXIA YUXIONG
XIA YUXIONG
SYSatoshi Yamane
Satoshi Yamane
WWWeixi Wang Wang
Weixi Wang Wang
HIHiroki Ihara
Hiroki Ihara
JLJidong Lu
Jidong Lu
YLYuxi Luo
Yuxi Luo
Real-time management of short-term ozone peaks during arc welding remains challenging because ventilation- and enclosure-defined transport boundaries can create strong position-dependent peak behavior, even under fixed process settings. This study establishes a coordinate-referenced, event-level monitoring and analysis framework to quantify ozone–fume peak coupling under a controlled local exhaust ventilation (LEV) suction boundary during CO2 arc welding. A controlled process–environment testbed with a defined suction condition was implemented, and synchronized ozone and fume signals were acquired at three sampling points referenced to the arc position and the LEV inlet direction. The particulate channel was anchored to a PM4 gravimetric reference, yielding a condition-specific traceable CPM-to-mass conversion factor K1 of 1.76 × 10−2 mg/(m3·CPM) and enabling standardized peak-fume endpoints on a mass-concentration scale. The primary inferential analysis used the curtain-on dataset, comprising 21 sessions and 42 event-level records balanced across three sampling points. Under the same suction boundary, peak coupling was strongly monitoring-coordinate dependent: LEV-aligned locations showed statistically supported ln–ln scaling between peak ozone and peak fume, whereas the opposite-side location did not exhibit statistically supported scaling; a pooled point-parameterized ln–ln model achieved an adjusted R2 of 0.777. As a descriptive control-relevant contrast, adding a curtain enclosure under continuous LEV produced strong event-level ozone peak suppression at LEV-aligned locations, with a maximum reduction of 87.8%, while attenuation at the opposite-side location remained limited. Overall, the results provide a ventilation-boundary-consistent, coordinate-specific basis for monitoring placement and control evaluation, identifying where peak translation is supported and where direct ozone monitoring remains necessary.

6 September 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
HPHualin Peng
Hualin Peng
MDMeirong Dong
Meirong Dong
HLHongchuan Liu
Hongchuan Liu
ZHZhehua Huang
Zhehua Huang
JLJidong Lu
Jidong Lu
Photothermal catalytic hydrogenation of carbon dioxide provides an effective strategy for the high-value utilization of carbon resources. Under photothermal conditions, active metals play a crucial role in regulating reaction pathways, thereby determining catalytic activity and product selectivity. In this work, Ni/CeO2 and Cu/CeO2 catalysts were synthesized using a Ce-UiO-66 metal-organic framework (MOF) as the precursor via an in situ impregnation method. The effects of these two active metals on the reaction pathways of CO2 hydrogenation under photothermal conditions were systematically compared, and the underlying mechanism governing the selectivity toward CO2 methanation and the reverse water-gas shift (RWGS) reaction was elucidated. The results demonstrate that Ni/CeO2 exhibits favorable low-temperature methanation activity under photothermal conditions, achieving a CO2 conversion of 68.91% and a CH4 selectivity of 91.11% at 300 °C, while reducing the optimal reaction temperature by approximately 100 °C compared with thermal catalysis. As the reaction temperature increased, the dominant reaction pathway gradually shifted from methanation to the RWGS reaction, exhibiting pronounced temperature-dependent behavior. In contrast, Cu/CeO2 predominantly catalyzed CO2 hydrogenation to CO via the RWGS pathway. Although photothermal coupling further enhanced its catalytic activity, the promotional effect was less significant than that observed for Ni/CeO2. Overall, different active metals regulate the interfacial electronic structure and charge-carrier behavior under photothermal conditions, thereby modulating CO2 activation and the adsorption and conversion of key reaction intermediates, ultimately enabling controllable regulation of reaction pathways and product selectivity. This study provides new insights into the structure-activity relationship of MOF-derived metal/CeO2 catalysts for photothermal CO2 conversion.