Strain-stabilized perovskites: The perovskite materials used for solar cells and light-emitting diodes (which are black in color) are generally less stable at room temperature than the electronically inactive nonperovskite phases (which are yellow in color). Steele et al. show that for CsPbI ₃ , strain induced in a thin film after annealing the material to 330°C and then rapidly cooling it to room temperature kinetically trapped the black phase. Grazing-incidence wide-angle x-ray scattering revealed the crystal distortions and texture formation created by interfacial strain. Science , this issue p. 679

Organometal halide perovskites show promising features for cost-effective application in photovoltaics. The material instability remains a major obstacle to broad application because of the poorly understood degradation pathways. Here, we apply simultaneous luminescence and electron microscopy on perovskites for the first time, allowing us to monitor in situ morphology evolution and optical properties upon perovskite degradation. Interestingly, morphology, photoluminescence (PL), and cathodoluminescence of perovskite samples evolve differently upon degradation driven by electron beam (e-beam) or by light. A transversal electric current generated by a scanning electron beam leads to dramatic changes in PL and tunes the energy band gaps continuously alongside film thinning. In contrast, light-induced degradation results in material decomposition to scattered particles and shows little PL spectral shifts. The differences in degradation can be ascribed to different electric currents that drive ion migration. Moreover, solution-processed perovskite cuboids show heterogeneity in stability which is likely related to crystallinity and morphology. Our results reveal the essential role of ion migration in perovskite degradation and provide potential avenues to rationally enhance the stability of perovskite materials by reducing ion migration while improving morphology and crystallinity. It is worth noting that even moderate e-beam currents (86 pA) and acceleration voltages (10 kV) readily induce significant perovskite degradation and alter their optical properties. Therefore, attention has to be paid while characterizing such materials using scanning electron microscopy or transmission electron microscopy techniques.

Ever since the inception of light microscopy, the laws of physics have seemingly thwarted every attempt to visualize the processes of life at its most fundamental, sub-cellular, level. The diffraction limit has restricted our view to length scales well above 250 nm and in doing so, severely compromised our ability to gain true insights into many biological systems. Fortunately, continuous advancements in optics, electronics and mathematics have since provided the means to once again make physics work to our advantage. Even though some of the fundamental concepts enabling super-resolution light microscopy have been known for quite some time, practically feasible implementations have long remained elusive. It should therefore not come as a surprise that the 2014 Nobel Prize in Chemistry was awarded to the scientists who, each in their own way, contributed to transforming super-resolution microscopy from a technological tour de force to a staple of the biologist's toolkit. By overcoming the diffraction barrier, light microscopy could once again be established as an indispensable tool in an age where the importance of understanding life at the molecular level cannot be overstated. This review strives to provide the aspiring life science researcher with an introduction to optical microscopy, starting from the fundamental concepts governing compound and fluorescent confocal microscopy to the current state-of-the-art of super-resolution microscopy techniques and their applications.

The direct conversion of C₃ sugars (or trioses) to alkyl lactates was achieved using zeolite catalysts. This reaction represents a key step towards the efficient conversion of bio-glycerol or formaldehyde to added-value chemicals such as lactate derivatives. The highest yields and selectivities towards the desired lactate product were obtained with Ultrastable zeolite Y materials having a low Si/Al ratio and a high content of extra-framework aluminium. Correlating the types and amounts of acid sites present in the different zeolites reveals that two acid functions are required to achieve excellent catalysis. Brønsted acid sites catalyse the conversion of trioses to the reaction intermediate pyruvic aldehyde, while Lewis acid sites further assist in the intramolecular rearrangement of the aldehyde into the desired lactate ester product. The presence of strong zeolitic Brønsted acid sites should be avoided as much as possible, since they convert the intermediate pyruvic aldehyde into alkyl acetals instead of lactate esters. A tentative mechanism for the acid catalysis is proposed based on reference reactions and isotopically labelled experiments. Reusability of the USY catalyst is demonstrated for the title reaction.