Haiting Di

Dr. Haiting Di

orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 April 2011 in Optics & Laser Technology
Verified
Journal Article
Closed access
YFYili Fu
Yili Fu
HDHaiting Di
Haiting Di

4 November 2016 in Journal of Modern Optics
Verified
Journal Article
Closed access
HDHaiting Di
Haiting Di
SSSuping Sun
Suping Sun
YCYing Che
Ying Che
Untreated fibre is not sensitive to bending deformation. In this paper, a fibre-optic deformation sensor has been developed by introducing a light leakage zone on one side of fibre, which measures bending deformation directly. A respiration measurement system based on fibre-optic deformation sensors is developed. Two fibre-optic sensors are bonded to an elastic belt that is fixed around the chest, which ensures the deformation curvature of the sensors changes during respiration. The light leakage zones of two sensors are arranged at the same cross-section of the belt and the directions of two light leakage zones are opposite. In this case, the throughput of one sensor increases and the other decreases during respiration. A differential system is established by these two fibre-optic sensors, which improves the sensitivity of the measurement system. The proposed fibre-optic respiration measurement system enables a quantitative assessment of the respiratory depth and respiratory rate.

6 September 2024 in Actuators
Verified
Journal Article
Open access
PDF file
CLChangming Li
Changming Li
HDHaiting Di
Haiting Di
YLYongwang Liu
Yongwang Liu
KLKe Liu
Ke Liu
The lower limb exoskeleton (LLE) plays an important role in production activities requiring assistance and load bearing. One of the challenges is to propose a control strategy that can meet the requirements of LLE trajectory tracking in different scenes. Therefore, this study proposes a control strategy (DBO–FPID) that combines the dung beetle optimizer (DBO) with feedforward proportional–integral–derivative controller (FPID) to improve the performance of LLE trajectory tracking in different scenes. The Lagrange method is used to establish the dynamic model of the LLE rod, and it is combined with the dynamic equations of the motor to obtain the LLE transfer function model. Based on the LLE model and target trajectory compensation, the feedforward controller is designed to achieve trajectory tracking in different scenes. To obtain the best performance of the controller, the DBO is utilized to perform offline parameter tuning of the feedforward controller and PID controller. The proposed control strategy is compared with the DBO tuning PID (DBO–PID), particle swarm optimizer (PSO) tuning FPID (PSO–FPID), and PSO tuning PID (PSO–PID) in simulation and joint module experiments. The results show that DBO–FPID has the best accuracy and robustness in trajectory tracking in different scenes, which has the smallest sum of absolute error (IAE), mean absolute error (MEAE), maximum absolute error (MAE), and root mean square error (RMSE). In addition, the MEAE of DBO–FPID is lower than 1.5 degrees in unloaded tests and lower than 3.6 degrees in the hip load tests, with only a few iterations, showing great practical potential.

4 July 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JMJiachen Ma
Jiachen Ma
SCSiyi Chen
Siyi Chen
HDHaiting Di
Haiting Di
KLKe Liu
Ke Liu
Traditional six-axis force sensors are mostly based on resistance strain, piezoelectricity and capacitors, which have poor resistance to electromagnetic interference. In this paper, a six-axis force sensor based on bending-sensitive optical fibers is proposed. A 3-UPU-(universal joint–prismatic joint–universal joint) compliant parallel mechanism is adopted in the sensor. The bending-sensitive optical fiber is encapsulated to form a fiber encapsulation module (FEM). The configuration of the FEMs within the six-axis force sensor is investigated. Static and stiffness analyses of the sensor are conducted and a force mapping matrix for the sensor is established. Simulation experiments are performed to verify the correctness of the established force mapping matrix. The detection system of the sensor is fabricated and the experiments are carried out to evaluate the performance of the sensor. The experiment results show that the maximum values of type-I errors and type-II errors are 4.52%FS and 3.26%FS, respectively. The maximum hysteresis and repeatability errors are 2.78% and 3.27%. These results verify the effectiveness of the proposed sensor.

15 April 2026 in Machines
Verified
Journal Article
Open access
PDF file
SZShanyi Zhuang
Shanyi Zhuang
HDHaiting Di
Haiting Di
GQGuibao Qin
Guibao Qin
HCHaoyuan Chen
Haoyuan Chen
Magnetic wall-climbing robots have great potential applications for the maintenance and inspection of large steel structures. However, they are susceptible to overturning when climbing over obstacles on vertical walls, primarily due to localized failures in the adhesion and shifts in the center of gravity. To address this issue, this paper presents an improved robot design featuring a passive adaptive tracked mobility module and a link-spring anti-overturning module. The adaptive tracked mobility module, incorporating spring tensioning mechanisms and belt press wheels, enables dynamic conformity to uneven walls and maintains stable magnetic adhesion. The link-spring anti-overturning module converts the front-end lift during obstacle crossing into an anti-overturning moment applied to the rear end of the robot. Notably, there is no need for additional drivers or control units. The structural design and three-dimensional modeling of the robot are carried out. Its working principle is analyzed, and parametric modeling and simulation analysis are performed. A physical prototype is developed and obstacle-crossing experiments are conducted on a vertical wall. The results demonstrate that the adaptive tracked mobility module and the anti-overturning module can successfully assist the robot in climbing over an obstacle with a maximum height of 23 mm, and the robot exhibits excellent stability while climbing over continuous obstacles and moving on uneven vertical walls.