Identifying the precise location of an incident is a critical component of traffic incident management. Most states and larger metropolitan agencies have deployed closed-circuit television cameras to verify the exact location of incidents received from motorists’ calls and facilitate incident coordination. Past studies have investigated positioning the nearest camera’s view on the incident using a camera-to-mile marker mapping methodology, where the views are positioned on the nearest mile marker to the incident. This approach is labor intensive, and the field of view may not capture an incident away from the mile marker. This paper describes a camera calibration process using orthorectified aerial imagery and publicly available digital elevation models and proposes a camera-to-GPS positioning methodology. This new methodology will allow for continuous positioning of the camera view to any GPS coordinate, either along the road or an adjacent ramp in view of an agency camera. Coordinates can be obtained from incidents identified by irregular paths of connected vehicles or connected emergency vehicles on scene. These techniques have been applied to 71 cameras in Indiana and used daily by traffic management staff. This paper concludes with a discussion of the limitations of the simplified geometric model used and improvements that could increase the accuracy of the proposed methodology at the cost of increased complexity.
Many transportation agencies have deployed pan–tilt–zoom (PTZ) closed-circuit television (CCTV) cameras to monitor roadway conditions and coordinate traffic incident management (TIM), particularly in urbanized areas. Pre-programmed “presets” provide the ability to rapidly position a camera on regions of highways. However, camera views occasionally develop systematic deviations from their original presets due to a variety of factors, such as camera change-outs, routine maintenance, drive belt slippage, bracket movements, and even minor vehicle crashes into the camera support structures. Scheduled manual calibration is one way to systematically eliminate these positioning problems, but it is more desirable to develop automated techniques to detect and alert agencies of potential drift. This is particularly useful for agencies with large camera networks, often numbering in the 1000’s. This paper proposes a methodology using the mean Structured Similarity Index Measure (SSIM) to compare images for a current observation to a stored original image with identical PTZ coordinates. Analyzing images using the mean SSIM generates a single value, which is then aggregated every week to generate potential drift alerts. This methodology was applied to 2200 images from 49 cameras over a 12-month period, which generated less than 30 alerts that required manual validation to determine the confirmed drift detection rate. Approximately 57% of those alerts were confirmed to be camera drift. This paper concludes with the limitations of the methodology and future research opportunities to possibly increase alert accuracy in an active deployment.
Many state and local agencies’ mobility metrics are based upon selected spot speed studies, modeled segment speeds and modeled intersection delays. Field visits to collect speed and mobility data are expensive, time consuming and do not scale. Connected vehicle (CV) data is an emerging data source that provides richer, higher fidelity, scalable and timelier information. However, the sheer volume of CV data requires additional skills in processing “big data”. As a point of reference, data from vehicles travelling in the United States, from one original equipment manufacturer, is on the order of 500 billion records per month. In its raw form, this data can be challenging for many state and local agencies to efficiently process and extract insightful information. This paper proposes a novel framework to derive mobility related attributes at 0.1-mile segment resolution. These attributes characterize speeds, travel time indexes and reliability with temporal variations. These techniques are applied to over 24,831 directional miles of Interstates, U.S. routes, and state routes in Indiana. Approximately 108 billion CV records over a 7-month period from June 1 to December 31, 2024, were used to distill down to a system assessment database comprised of 248,314 rows and 317 parameters. The derived mobility metric dataset is also available through an open access data repository that can be easily ingested into any GIS platform. A discussion on agency use cases as well as how this data aided state agency staff in developing capital program recommendations is provided.
Traditionally, traffic signal management has been largely tactical and operated from the “bottom-up,” focusing on individual intersection performances influenced by public suggestions, field observation, and in some cases high-resolution controller data. Connected vehicle trajectory data now enables a scalable, complementary “top-down” approach for system-wide performance analysis, even for locations with no detection or communication. This paper proposes a data architecture for derived performance measures that can be used for both strategic (top-down) and tactical (bottom-up) management of traffic signals. To leverage a “top-down” approach, large amounts of data must be processed into smaller datasets. For efficiency and interoperability between performance measures and the tools used to derive the same, a scalable data management architecture is essential. This paper discusses and demonstrates a framework developed for the Indiana Department of Transportation, which contains the derived information from over 177 billion records per year for the state, covering more than 2,500 signalized intersections in just 80,000 or so rows of derived performance measures. This framework collects data using a combination of a fixed time period, date, movement, approach, and intersection identifier. The structured model of derived performance measures supports both tactical applications, such as green-time allocation, and top-down, strategic management applications such as identifying capacity-constrained signals that are candidates for capital improvements. This framework is applicable to other tools used to derive performance measures, such as high-resolution or LiDAR datasets.
Hard-braking and hard-acceleration data has been demonstrated as an important emerging data source that provides quicker feedback than crash data. In fact, a strong correlation between hard braking on the interstate and crash rates has been reported in previous studies. A previous study has shown that there are approximately 147 hard-braking events in a work zone for every crash. However, there have been subtle changes in acceleration thresholds as well as techniques automotive companies and third-party vendors use to compute hard braking. The motivation of this study is to define scalable and sustainable procedures for obtaining consistent hard-braking data. That data can then be used to develop a statewide system for longitudinal monitoring of hard-braking trends to assist in identifying and prioritizing roadways for more detailed safety studies. This study developed 0.1-mi “smart polygons” (linear-referenced geofencing features) that provide a directional base map for the entire system of Interstates, U.S. routes and state routes across the state of Indiana. Approximately 100 billion connected vehicle records were analyzed to derive hard braking statistics for the smart polygons.
Traditionally, crash data, crash risk models, video recordings and user surveys have been utilized by agencies to measure the safety benefits of ramp metering technology. Connected vehicle data can now provide an agile evaluation alternative for quantifying impact of ramp meter deployments. Furthermore, in contrast to crash data, connected vehicle near miss events occur much more frequently, so the before-after evaluation can be conducted over a much shorter time period consisting of a few months, or perhaps even a few weeks. Indiana deployed ramp meters on the southeast section of I-465 around Indianapolis, on or around May 14, 2024, which were then active primarily during the morning and evening peak hours. Additionally, Indiana deployed Variable Speed Limit (VSLs) on September 10, 2024 at 25 locations on I-465. This study was initiated to evaluate the impact of those deployments. Hard-braking events, a surrogate safety performance measure, were estimated from high-frequency connected vehicle data available at 3-second fidelity for vehicles passing through the metered ramps and the adjacent mainline interstate. A before-after analysis for the 4-5 PM peak hour showed approximately a 61% reduction in hard-braking events on mainline merge areas adjoining the metered ramps on the inner loop of I-465. Spatial analysis also showed a 70%, 41% and 33% median reduction in mild, moderate and severe hard-braking events per 0.1-mile segment in the entire 7.5-mile mainline corridor adjacent to metered ramps. A before-after analysis of the 10 AM–1 PM hours showed little to modest impact on speeds in 0.3-mile evaluation sections with VSL deployments. The methodologies and performance measures provided in this paper present a framework that scales well to systematically assess and document the performance of new ramp metering and VSL deployments.