A novel highly sensitive D-shaped photonic crystal fiber-based surface plasmon resonance (PCF-SPR) sensor for dual parameters of refractive index and temperature detecting is proposed. A PCF cladding polishing provides a D-shape design with a gold (Au) film coating for refractive index (RI) sensing (Core 1) and a composite film of silver (Ag) and polydimethylsiloxane (PDMS) for temperature sensing (Core 2). Comsol Multiphysics 5.5 is used to design and simulate the proposed sensor by the finite element method (FEM). The proposed sensor numerically provides results with maximum wavelength sensitivities (WSs) of 51,200 and 56,700 nm/RIU for Core 1 and 2 as RI sensing while amplitude sensitivities are −98.9 and −147.6 RIU⁻¹ with spectral resolution of 1.95 × 10⁻⁶ and 1.76 × 10⁻⁶ RIU, respectively. Notably, wavelength sensitivity of 17.4 nm/°C is obtained between −20 and −10 °C with resolution of 5.74 × 10⁻³ °C for Core 2 as temperature sensing. This sensor can efficiently work in the analyte and temperature ranges of 1.33–1.43 RI and −20–100 °C. Due to its high sensitivity and wide detection ranges, both in T and RI sensing, it is a promising candidate for a variety of applications, including chemical, medical, and environmental detection.

In order to broaden the sensing bandwidth of surface plasmon resonance (SPR) sensors, we propose and demonstrate a dual-channel SPR fiber optic sensor with wide bandwidth. The sensor is fabricated using no-core fiber (NCF), in which the film consists of a silver film and a ZnO film. The sensing characteristics are investigated by simulation and experiment. The resonance wavelength range of the SPR sensor can be significantly tuned by varying the thickness of the ZnO film. In the experiments, a dual-channel SPR sensor that can be used for simultaneous detection of temperature and refractive index was realized by cascading ZnO/Ag film with Ag film. The experimental results show that the two sensing channels are independent without crosstalk. The sensitivity of this sensor is 3512 nm/RIU in the range of 1.333 ∼ 1.385 and 4.6 nm/°C in the range of 0 ∼ 60 °C, which is better than most of the current dual-channel SPR sensors. In addition, the experimental results show that this sensor has good stability in use. The sensor proposed in this work has the advantages of a wide operating wavelength range, simple and compact structure, and high sensitivity. It has a broad application prospect in the simultaneous measurement of refractive index and temperature of liquids.

To achieve more accurate analysis and detection of changes in liquid parameters, we propose a dual-parameter surface plasmon resonance (SPR) sensor that can measure refractive index (RI) and pH simultaneously. In this paper, we compare and analyze the transmission spectrum when the SPR effect is excited by the cladding mode of a photonic crystal fiber (PCF) and the core mode of the no-core fiber. The results show that the SPR effect excited using the cladding mode is stronger and the sensor has better loss peaks, which is more conducive to realizing the detection of the external environment. Therefore, the sensor uses PCF as the substrate and utilizes a cascade composite film structure, and the area where a silver film is deposited on the surface of the PCF is selected as the RI sensing area. Another part of the PCF, after the silver film is deposited, uses a high-sensitivity polyacrylic acid/chitosan self-assembled nanofilm as the pH-sensitive film. Experimental results show that the maximum sensitivity is 4122.44 nm/RIU and -57.82 nm/pH when the RI range is between 1.333 and 1.385 and the pH range is between 3.11 and 8.63, respectively. In addition, we experimentally verified that the sensor had good stability and repeatability. The design of the sensor provides new possibilities for real-time monitoring and precise control, helping to advance scientific research and the development of industry.

A dual-core photonic crystal fiber (PCF) based surface plasmon resonance (SPR) sensor for measuring refractive index (RI) and temperature sensing and polarization filtering performance, is presented in this paper. The proposed sensor’s cladding upper polished surface was coated with a gold film for refractive index sensing (RI) while lower polished surface with a composite film of silver and polydimethylsiloxane (PDMS) for temperature sensing. Proposed sensor was designed and simulated using finite element method (FEM) through commercially available Comsol Multiphysics software. Wavelength sensitivity of 18400 nm/RIU along with resolution of 5.43 × 10⁻⁶ RIU and amplitude sensitivity of 150.74 RIU⁻¹ were obtained for core 1 as RI sensing, while wavelength sensitivity of 12.0 nm °C⁻¹ along with resolution of 8.33 × 10⁻³ °C for core 2 as temperature sensing. It has a maximum loss of 30822 dB m⁻¹ towards Y-polarization which makes it ideal for polarization filtering, as Y has a higher loss than X-polarization. An extinction ratio (ER) of −92.31 dB at a transferring length of 3 mm was obtained showing its polarization filtering capabilities. Overall results indicate that our sensor is highly sensitive for both RI and temperature sensing and expected to perform better in polarization filtering performances. Its wide detection range in RI combined with temperature sensing increases its potential applications in the medical, chemical, environmental, and biosensor detection industry.