A unique relief fibula dated to the Migration Period (first half of the sixth century) was found in Radziejów, Poland. This stray find changes previous opinions on the lack of settlement in central Poland at that time. As the find is the only one of such type in Poland, a special attention was paid to possible analogies, mainly finds from Scandinavia and Western Europe. The fibula underwent technological analyses in order to reveal its technology of manufacture. For this purpose, the chemical and elemental composition of the alloy was studied. Several physico-chemical complementary techniques such as optical microscopy (OM), scanning electron microscopy with energy dispersive X-ray (SEM–EDX) spectroscopy, energy dispersive X-ray fluorescence (ED-XRF) analysis, X-ray diffraction (XRD) analysis and micro-hardness testing (HV0.2) were used to study the technology of the find. The investigations revealed that this artefact was made from brass (4–17 wt% Zn) with an admixture of Sn (2–12 wt%). Two technologies were used: casting for the bow and forming for the part with the axle of the spring. The artefact’s surface was tinned in the hot-dipping process. The physical structural analyses demonstrated that the artefact was cast and ornamented by surface stamping under a relatively low temperature (about 500 °C).
Currently, virtual and augmented reality (VR and AR) technologies are becoming more and more widely used in various fields of human activity, including archeology. The aim of this article is to analyze the possibilities of using VR and AR technologies in broadly understood activities related to underwater archeology. This work is a review and presents current applications of VR and AR in underwater archeology based on case studies. This paper presents the development of VR and AR technologies, including in the field of underwater archaeology, and generally describes the process of creating VR and AR applications for underwater archeology purposes, with particular emphasis on data collection methods. Then, the areas of application of these technologies in underwater archeology and related areas were generally presented and the barriers to their use were discussed. The most important part of the work is a discussion of the use of VR and AR in underwater archeology based on the selected case studies. The article ends with a summary of the current state and a discussion of the possibilities of developing virtual technologies in the applications of underwater archeology.