Reinjection is thought to be the most effective way to maintain reservoir pressure and production capacity for hydrothermal resources. The use of external water injection to replenish deep geothermal reservoirs is a new approach in China to addressing the problems of declining groundwater levels and energy depletion caused by the excessive and uneven exploitation of geothermal resources. However, the key challenge and focus of the feasibility assessment of this method lies in the chemical compatibility of the external water with the native geothermal reservoir water and surrounding rocks. In this paper, we discuss the geochemical response of a dolomite reservoir to lake water injection based on experiments on water–rock interaction in the Wumishan formation in the Dongli Lake area of Tianjin. The results show that after reactions with dolomite, the TDS of the reacted water decreases, indicating the occurrence of precipitation. According to the calculation results obtained using the PHQREEC program, the precipitation amount is found to be quite limited. Geochemical analysis indicates that at the initial stage of the reactions, plagioclase dissolves and releases alkaline metals like Ca-, Na-, SiO2- and Al-bearing compositions, leading to the oversaturation and precipitation of dolomite and calcite. As the reaction progresses, a portion of the dolomite dissolves, while the calcite continues to precipitate at a later stage. Illite precipitates and its effects on reservoir structure depend on its shape. Based on the experimental data, it can be concluded that the dolomite reservoir will be slightly affected by the reinjection of lake water; however, it is still a good method for the sustainable development of geothermal resources.
Tianjin, nestled on the North China Plain, possesses abundant geothermal resources with tremendous potential for development and utilization. This study employs hydrogeochemical and isotopic analysis techniques to thoroughly explore the geochemical characteristics and circulation patterns of geothermal fluids in Tianjin, shedding light on the mechanisms underlying the formation and evolution of deep geothermal fluids. The findings reveal that atmospheric precipitation serves as the primary recharge source for the region’s geothermal fluids, with the calculated recharge heights coinciding with those of the Jixian mountainous area. This precipitation infiltrates through permeable layers and the deep, large faults surrounding the southern plain, entering relatively enclosed or semi-enclosed geothermal reservoirs. As they circulate, the geothermal fluids undergo intricate interactions with the surrounding rocks, including processes such as leaching, adsorption, carbonate reprecipitation, cation exchange, and decarbonation. The fluids circulate at depths ranging from 1.6 to 3.5 km, with temperatures spanning from 67 to 133 °C. Along the flow path, the anionic composition of the geothermal fluids shifts from HCO3− dominance in the north to a coexistence of Cl− and SO42−, ultimately dominated by Cl− in the south, accompanied by an increase in total dissolved solids (TDS). The results indicate that Tianjin geothermal fluids are mainly recharged by meteoric water and evolve along their flow paths through dissolution of evaporitic and carbonate minerals, cation exchange, and carbonate precipitation. Hydrochemical and Sr-isotope differences suggest generally limited vertical connectivity among the studied reservoirs, although local hydraulic interaction may occur near conductive faults. These results provide constraints on the hydrogeochemical evolution and management of geothermal resources in the Tianjin sedimentary basin.
The structurally complex Cangdong fault zone controls the medium- to low-temperature geothermal potential of the Dongli Lake field in Tianjin, China. Previous assessments in Chinese sedimentary basins predominantly employed simplified volumetric methods that cannot capture transient system behavior under production–reinjection conditions, largely due to the scarcity of systematic dynamic monitoring data. This study addresses this gap by exploiting relatively abundant dynamic monitoring records in the study area, integrating borehole stratigraphy, geological cross-sections, and well logging data to construct a 3D geological model and coupled numerical model of the fault-controlled reservoir. Meticulous natural-state calibration against temperature and pressure logging monitoring data yields key reservoir parameters, achieving mean relative errors of 2.35–3.33% for temperature and 6.32–9.73% for pressure. These results are based on calibration against wells DL-19 and DL-40, which intersect the Jxw reservoir at depths of 1850–2300 m. This process quantifies thermal conductivity and reveals pronounced permeability anisotropy in the primary Jixian Wumishan (Jxw) reservoir, with horizontal permeability (3.00 × 10−13 m2) an order of magnitude higher than vertical (3.00 × 10−14 m2), directly evidencing the fault zone’s hydraulic dominance. Dynamic sensitivity analysis demonstrates that optimal well placement must target high-permeability zones adjacent to the main fault, and adaptive reinjection protocols are proposed for pressure maintenance and thermal drawdown mitigation. This research provides a calibrated, data-driven framework and scientifically grounded strategies for long-term sustainability of the Dongli Lake resource, with transferable implications for optimizing development in other fault-controlled sedimentary basin systems.