An accurate assessment of the state of charge (SOC) of electric vehicle batteries is critical for implementing frequency regulation and peak shaving. This study proposes mechanism- and data-driven SOC fusion calculation methods. First, a second-order Thevenin battery model is developed to obtain the physical parameters of the battery. Second, data from the Thevenin battery model and data from four standard cycling conditions in the electric vehicle industry are added to the dataset of the feed-forward neural network data-driven model to construct the test and training sets of the data-driven model. Finally, the error of the mechanism and data-driven fusion modeling method is quantitatively analyzed by comparing the estimation error of the method for the battery SOC at different temperatures with the accuracy of the data-driven SOC estimation method. The simulation results show that the root mean square error, the mean age absolute error, and the maximum error of mechanism and data-driven method for the estimation error of battery SOC are lower than those of the data-driven method by 0.9%, 0.65%, and 1.3%, respectively. The results show that the mechanism and data-driven fusion SOC estimation method has better generalization performance and higher SOC estimation accuracy.

Aiming at the current power control problems of grid-side electrochemical energy storage power station in multiple scenarios, this paper proposes an optimal power model prediction control (MPC) strategy for electrochemical energy storage power station. This method is based on the power conversion system (PCS) grid-connected voltage and current to establish a power prediction model for energy storage power stations, achieving a one-step prediction of the power of the power station. The power prediction error is used as a power regulation feedback quantity to correct the reference power input. Considering the state of charge ($SOC$) constraint of the battery, partition the $SOC$ into different states. Using $SOC$ as the power regulation feedback, the power of the battery compartment can be adjusted according to the range of the battery $SOC$ to prevent $SOC$ from exceeding the limit value, simultaneously calculating the power loss of the energy storage power station to improve the energy efficiency. The objective function is to minimize the power deviation and power loss of the power station. By solving the objective function, the optimal switching voltage vector of the converter output is achieved to achieve optimal power control of the energy storage power station. The simulation results in various application scenarios of the energy storage power station show that the proposed control strategy enables the power of the storage station to quickly and accurately track the demand of grid scheduling, achieving the optimal power control of the electrochemical energy storage power station.

Due to the increasing integration of new energy sources, the power system now exhibits low inertia, in which the broadband oscillation problem is increasingly significant in the face of the strong coupling of complex and variable power systems, and the current lack of uniform and effective mathematical models and analysis methods. To solve this major problem, a broadband oscillation localization method based on the combination of compressed perception and graph attention network (GAT) is proposed. The method firstly uses the principle of compression perception to compress and transmit the oscillation time series data of the sub-station, reconstructs the compressed signal at the master station and aggregates the grid topology and node characteristic information to effectively reduce the redundancy of the oscillation data; reconstruction error is only 0.031, takes into account the balance of the samples and the effectiveness of the computation, and adopts the multi-attention mechanism and the cross-entropy loss function to improve the performance of the model training. Finally, the offline training and online evaluation model based on the GAT algorithm is constructed, and the accuracy of the model is up to 98.5%; and the results show that the method has a high positioning accuracy and a certain anti-noise ability at the same time.

Accurate and rapid transient voltage stability assessment is crucial for the safe and stable operation of new energy bases in desert and grassland regions. Existing deep learning methods fail to adequately capture the high-dimensional dynamic coupling features of transient voltage signals in large-scale renewable energy bases with UHVDC transmission, and suffer from poor performance under class-imbalanced sample conditions. This paper proposes a transient voltage stability assessment method utilizing continuous wavelet transform (CWT) time–frequency images and a deep residual network (ResNet-50). CWT with the Morlet wavelet basis converts voltage time-series signals into multi-scale time–frequency images to simultaneously capture temporal and frequency-domain transient features. An improved focal loss (FL) function is introduced to dynamically adjust category weights based on actual sample distribution, enhancing model robustness under extreme class imbalance. The proposed method is validated on a modified IEEE 39-bus system incorporating the Qishao UHVDC line and wind/photovoltaic integration in Northwest China, using 1490 simulation samples under diverse fault scenarios. Results demonstrate that the proposed CWT-ResNet achieves 98.88% accuracy, 94.74% precision, 100% recall, and 97.29% F1-score, outperforming SVM, 1D-CNN, and 1D-ResNet baselines. Under 5 dB noise conditions, the method maintains over 90% accuracy, demonstrating strong noise robustness.