Carbon nanotube (CNT) films were grown on silicon wafers with and without a nickel layer (Si-CNT and Ni-CNT) via the pyrolysis of iron phthalocyanine. The nickel layer was prepared using the electroless plating method. To study the emission stability of Si-CNT and Ni-CNT cathodes during intense pulsed emission, emission characteristics were measured repeatedly with a diode structure using a Marx generator as a voltage source. For the peak values of the pulsed voltage, which were in the range between 1.62–1.66 MV (corresponding to electric field intensities between 11.57–11.85 V/μm), the first cycle emission current was 109.4 A for Si-CNT and 180.5 A for Ni-CNT. By comparing the normalized emission currents of the Si-CNT and Ni-CNT cathodes, the improvement in the emission stability can be easily quantified. The number of emission cycles necessary for the peak current to decay from 100% to 50% increased from ∼3 for Si-CNT to ∼11 for a Ni-CNT film.
We developed a new scheme to suppress the electric-field-screening effect in high growth density of a carbon nanotube (CNT) film during its intense pulsed emission. We synthesize the CNT film on a tridimensional surface (t-CNT film). The tridimensional surface includes wet etched silicon pyramids, and the Ni layer is electroless plated thereon. The intense pulsed emission characteristics of the t-CNT and planar-grown CNT (p-CNT) films were measured using a diode structure in single-pulse mode. The even turn-on field decreased from 5.5 V/μm for p-CNTs to 2.8 V/μm for t-CNTs, and the peak emission current increased from 232 A for p-CNTs to 324 A for t-CNTs at a peak field intensity ∼12.2 V/μm. The peak current of the t-CNT film increased by ∼39.7% over the p-CNT film. It is clear that the micro-pyramid array can effectively suppress the field screening effect to improve the electron-emission of CNT films.
28 December 2022 in Journal of Experimental Nanoscience
In graphene electronics applications, in order to obtain the size and pattern required for the device, it is often necessary to photolithography the graphene after growth, resulting in contamination of graphene by the photoresist which have doping effect. Therefore, in order to avoid this effect, this article focused on directly grown patterned graphene. Based on atmospheric pressure chemical vapour deposition (APCVD) technology, patterned graphene was successfully grown on SiO2/Si by metal proximity catalytic effect. The patterned graphene was characterized by Raman spectroscopy and optical microscope. The effects of parameters such as gas flow, growth temperature, and growth time on the growth of patterned graphene were explored, and the best results were obtained. Metal copper and cobalt thin films were used for assisted catalysis, respectively, and the mechanism of metal proximity catalysis was explored. The experimental results showed that proximity catalysis is a catalytic growth mechanism based on surface diffusion. The growth method avoids using photolithography to make patterns, and can grow patterned graphene on insulating substrates or semiconductors in one step, which is of great significance for making patterned graphene and applying them to semiconductor devices.