Long-term stable and robust stack technology is a pre-requisite for a successful implementation of SOFC in the market and so it is one of the main issues in SOFC development. Also bigger stacks are desirable for systems with increased power output. Progress in stack and systems development is illustrated. Enhanced thermo-mechanical robustness of stacks in the kW range was demonstrated by successfully cycling a five layer stack incorporating cells of 20 × 20 cm² 100 times between 200 and 700°C. Aiming at the utilization of anode-supported cells from other manufacturers, the design was modified to a window frame layout, integrating in this case four 10 × 10 cm² cells in one layer. A 20 kW system was operated for about 7000 hours in total, thereby demonstrating the suitability of the module and system concept. As special highlights, long-term tests with short stacks have now reached operation times of 66,500 h and 34,500 h, respectively. As a relatively new subject, activities entailed by high temperature electrolysis are briefly outlined.
In order to become a substantial part of the energy supply infrastructure in the course of the German “Energiewende” (energy system transition), SOFC plants in the power range of 100 kW or larger must be realized. Scale-up of units will become even more important in the field of electrolysis to balance electricity conversion and consumption. Therefore, currently one of the main goals of SOC development at the Forschungszentrum Jülich is the development of single stacks in the 15 kW power range as a basis for realization of larger units. Initial operational results with the adapted stack design are reported. Results of long-term operation in fuel cell and in electrolysis mode are presented as well as activities in the field of systems development and operation. This also includes the development of a 5 kW rSOC (reversible Solid Oxide Cell) system.
Based on more than 20 years of scientific development, Forschungszentrum Jülich is still continuously improving its SOFC technology. Based on a warm pressing process, anode supported cells have been tested in stack sizes up to 5 kW. Recent cell developments focused on tape-casting and sequential tape-casting. The enhanced thermo-mechanical robustness of stacks in the kW range was demonstrated by successfully cycling 100 times between 200 and 700 °C. To be able to utilize also anode supported cells from other manufacturers, the design was modified to a window frame layout, integrating four 10×10 cm² cells in one layer. A 20 kW system was operated for about 7000 hours in total, demonstrating thereby the suitability of the module and system concept developed in JÜLICH. As special highlights, long-term tests with short stacks have now reached operation times of 65,200 h and 34,500 h, respectively. As relatively new subject the activities in high temperature electrolysis are briefly outlined.