The growing consumer demand for natural and eco-friendly food products motivates the development and evaluation of new and natural inputs for the food industry. So, this work explores the potential of grape pomace (GP) from winemaking, a food production residue, to obtain an anthocyanin-rich, ready-to-use extract with antioxidant activity that can confer improved color-rich gummy candies. The anthocyanins’ chemical nature and the predictive COSMO-SAC model was considered for screening the best natural eutectic mixture for anthocyanin extraction. The eutectic mixtures composed of choline chloride as a hydrogen bond acceptor and acetic and citric acids as hydrogen bond donors were selected as solvents. The extraction was performed using a high-shear disperser (Ultra-Turrax®) at 45 °C and was stirred at 5000 rpm for 10 min. The extracts presented high total anthocyanin content (TAC), up to 60 µg equivalent of cyaniding-3-glucoside/g of dry GP, and high antioxidant activity as determined by DPPH and FRAP assays. The phenolic profile was also determined by high-performance liquid chromatography (HPLC) and the results corroborated with the antioxidant activity of the extracts. The results also demonstrate that eutectic mixtures enhance the extraction efficiency of anthocyanins and improve their stability, making them suitable for incorporation into functional food products such as gummies, acting as natural colorants.
16 August 2024 in Journal of the Science of Food and Agriculture
Peach palm (Bactris gasipaes) is a native tree from Brazil widely used for obtaining palm heart. Due to the increasing interest in palm heart, plantations are expanding to the Brazilian South and Southeast regions. Peach palm processing generates high amounts of solid wastes, which are inadequately disposed of and have no consolidated use. Proposing potential utilizations for the valorization of these lignocellulosic matrices requires knowing their chemical composition. This work aimed to determine the chemical composition (at mineral, nutritional, and macromolecular levels) of the three by-products (internal sheath, external sheath, and basal portion) generated during the processing of the peach palm, to characterize their semi-volatile compounds, and to compare them to the edible palm heart. The by-products represent 83.6% (w/w) of the biomass in the peach palm processing and have a high dietary fiber content (59.2 - 68.1%). Internal sheath and basal portion showed high protein content (8.40 - 11.8%) according to Brazilian legislation and several bioactive compounds such as myo-inositol and organic acids (succinic, gallic, and linoleic acids), indicating their nutraceutical properties and potential to be used as food additives or ingredients in food formulation. Besides, the external sheath had high cellulose content (39.6%) that could be extracted and applied in material science. All by-products have compounds of interest to the industry and a high potential to be employed in the development of products with higher added value.
In the current work, an alternative intensified methodology for the extraction of phenolic compounds from yerba mate is proposed, considering the use of sequential multistages. Conventional single-stage extraction was optimized in its key parameters (temperature and solid/liquid ratio), and its kinetics were evaluated. The multistage extraction process was evaluated considering two and four stages, considering the results on the antioxidant potential of the final extract. A scale-up simulation was conducted, considering the processing of 25 kg of yerba mate a day, and economic and environmental aspects were considered. The best extraction condition was achieved at 70 °C with 0.5 g yerba mate 100 mL–1 water. Intensified multistage processes and conventional ones resulted in final extracts with similar antioxidant potential (493.0–526.5 mg GAE L–1), highlighting that the three processes can be used for the obtention of the same product. Regarding the economic aspects, using the multistage extraction processes results in a considerable decrease in the Total Capital Investment of a yerba mate plant extract. Finally, environmental analysis shows that the multistep process is more eco-friendly than the conventional one, as it exhibits considerably lower energy consumption and lower CO2 emissions. The intensified multistage extraction process is a green and eco-friendly alternative to conventional extraction processes, with potential for implementation in several plant extract industries.
1 February 2024 in OBSERVATÓRIO DE LA ECONOMÍA LATINOAMERICANA
Ilex paraguariensis, known as yerba mate, is a native species from South America widely used in the preparation of drinks, with several bioactive compounds. Its industrial drying process is archaic and associated to the contamination of the leaves with carcinogenic compounds. Previous study reported microwave drying of yerba mate as a potential alternative for its drying, but there are no studies on the techno or economic aspects of this process. Hence, this study aims to determine the drying kinetics on the yerba mate leaves (YML) using the microwave assisted drying method, and to provide a techno-economics analysis for different production and rate of return of investment scenarios. Microwave drying (MWD) of yerba mate was conducted at different powers (675, 945, and 1,215 W), and conventional kinetics models were fitted to the experimental data. A techno-economics analysis was conducted considering the processing of 10 – 100 kg YML/h in an agribusiness located in South Brazil. As results, the different microwave powers resulted in different equilibrium moisture content, and only the MWD at 1,215 W achieved Brazilian’s legislation requirement of 10 % of moisture (wet basis). Page’s drying kinetics model presented the best fitting to the experimental data, and its parameters were used in the study of economic viability. Finally, a required selling price of 19.88 US$/kg was calculated for the selling of the dried YML, resulting in a time of return of investment of 1 year for an agribusiness processing 100 kg YML/h.