In the present work, 2-propyl-, and 2-heptyl-, 1H-benzo[d]imidazole were prepared by condensation reaction of o-phenylenediamine with n-butanoic acid and n-octanoic acid, respectively. The prepared products were characterized by FT-IR, 1H-NMR spectroscopy and melting point. These products were incorporated into acrylonitrile butadiene rubber (NBR) composites with two different fillers (Silica and High Abrasion Furnace carbon black HAF) as an antioxidant additive with different concentrations from 1up to 2 phr as a comparison with 2,2,4-trimethyl-1,2-dihydroquino-line (TMQ) as a traditional antioxidant. Their effects on the rheometric, physico-mechanical and electrical properties of NBR composites were evaluated. Thermo-oxidative aging was carried out for NBR composites and distribution of the prepared products observed by Scanning Electron Microscope (SEM).The results showed that the prepared products can act as highly efficient antioxidants in acrylonitrile butadiene rubber vulcanizates comparing with commercial antioxidant TMQ and revealed that there was enhancement in mechanical properties of NBR composites that containing the prepared products, as well. The results also illustrated that the optimum ratio from 2-alkylbenzimidazole incorporated into acrylonitrile butadiene rubber vulcanizates is 1.5 phr if compared with the same ratio from traditional antioxidant (TMQ).
1. Culex pipiens is a key vector in public health control strategies due to its critical role in transmitting several infectious diseases, including arboviruses, West Nile virus, Sindbis virus, and...
This study aimed to evaluate the efficacy of N-aminophthalimide (NAP) as a novel UV-stabilizer for high-density polyethylene (HDPE) in improving its physico-mechanical properties under UV exposure. NAP was synthesized by interaction between phthalimide and hydrazine hydrate. It was incorporated into HDPE with different weight ratios (1, 1.5, 2, and 3 %), and its performance was compared with Hostavin as a traditional UV stabilizer. The HDPE composites were exposed to UV irradiation for different periods (7 and 14 days) to evaluate their photodegradation behavior. Tensile strength, elongation at break were assessed before and after UV exposure. Also, oxidation induction time (OIT), melt flow rate (MFR), Vicat softening temperature were evaluated. Hostavin incorporation reduced tensile strength from 22.36 to 20.62 MPa at higher concentrations. It has been found that 3 % Hostavin, significantly improved elongation at break, increasing from 423 % to 1,170 %, suggesting enhanced flexibility. In contrast, NAP increased tensile strength to 22.9 MPa and moderately enhanced elongation but slightly declined at 3 % due to potential over-stabilization. Under UV exposure, retained tensile strength and elongation was improved with stabilizer content, which increasing tensile strength retention. The HDPE that containing NAP showed enhanced UV resistance and superior retention of mechanical properties compared to Hostavin.