Ice-on-coil energy storage technology has been widely used in air conditioning systems and industrial refrigeration as an efficient energy storage technology. This paper reviews the research progress of ice-on-coil energy storage technology, including its working principle, system design, key parameter optimization, and practical application challenges and solutions. Three kinds of ice melting systems are introduced. The internal ice melting system has the largest cold storage density and the slowest rate of ice melting. The external ice melting system has the lowest cold storage density and the fastest rate of ice melting. The combined ice melting system can have the highest density of cold storage density and a high rate of ice melting. By comparing the results of different studies, the influence of fin and thin ring application on the heat transfer enhancements of the ice-on-coil storage system is summarized. It is found that the ice storage time can be reduced by 21% and 34% when the annular fin and thin ring are set. Regarding system control, adopting the ice-melting priority strategy increases operating energy consumption, but the economy improves; using the unit priority strategy lowers operating energy consumption, but the economy suffers slightly. When the cooling demand exceeds the cooling capacity of the chiller, an ice melting priority control strategy is more economical. Some suggestions for future research are presented, such as optimizing the shape and arrangement of coil fins and ice storage systems integrated with renewable energy. It provides guidance for the further development of ice storage air conditioning technology.
1 November 2022 in Journal of Renewable and Sustainable Energy
The packed bed tank with multiple phase change materials (PCMs) is one of the most efficient latent heat energy storage techniques. This study presents insight into the influence of the latent heat arrangements on the cascaded packed bed tank, providing a new idea for designing multi-PCM packed bed tank, which concerns the screening of PCMs. In this study, a parametric study is conducted to optimize the latent heat of the multi-PCM packed bed tank for the charging and discharging process. A developed two-dimensional model is used to predict the thermal behaviors of the heat transfer fluid and PCMs in packed bed tanks, which is verified by experiment. The results showed that the case with uniform latent heat arrangement exhibits the best overall thermal performance, which obtains the lowest standard deviation of average heat-exchange zone travel velocities for the charging and discharging cycle process. Moreover, the relationship between the efficiency and the standard deviations of the heat-exchange-zone travel velocities is unearthed, and its effectiveness is verified by an actual cascaded PCMs packed bed tank. The charging/discharging/overall efficiency increases with a decrease in the standard deviation of the heat-exchange-zone travel velocities of the PCM layers. This relationship can be used as a new PCM selection method for the cascaded latent heat storage tank. In addition, the actual cascaded packed bed unit with a different latent heat is optimized by variable capsule diameters.