Mojtaba Karimaei Tabarestani

Dr. Mojtaba Karimaei Tabarestani

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2019 in Proceedings of the Institution of Civil Engineers - Water Management
Verified
Journal Article
Closed access
MTMojtaba Karimaei Tabarestani
Mojtaba Karimaei Tabarestani
Amir Reza ZarratiAmir Reza Zarrati
Amir Reza Zarrati
Scour hole development around a circular bridge pier protected by a collar under steady and unsteady flow conditions is thoroughly investigated. At the first stage, formation of a scour hole around the collar under different steady flow conditions was studied. Results showed that flow intensity, which is defined as upstream undisturbed bed shear velocity divided by bed material critical shear velocity (u*/u*c), is the major factor affecting collar efficiency in postponing scour depth at the pier nose. Decreasing u*/u*c from 0·99 to 0·8 increased the time taken to undermine the collar by about 26 times. At the second stage, formation of a scour hole around the collar under different hydrographs was studied. The range of u*/u*c in a hydrograph and its characteristics were found to be the most important factors for collar efficiency. Finally, empirical equations were developed to calculate the time taken to undermine the collar and for scour depth development.

9 September 2024 in Buildings
Verified
Journal Article
Open access
PDF file
MAMostafa Adresi
Mostafa Adresi
AYAli Reza Yamani
Ali Reza Yamani
MTMojtaba Karimaei Tabarestani
Mojtaba Karimaei Tabarestani
Gustavo Henrique NalonGustavo Henrique Nalon
Gustavo Henrique Nalon
Pervious concrete is desirable for water drainage in building systems, but achieving both high strength and good permeability can be challenging. Also, the importance of compaction energy is significant in determining the efficiency of pervious concrete. However, research on the development of unconfined compressive strength (UCS) prediction models for pervious concrete materials that incorporate compaction energy parameters remains unexplored. Therefore, this study aimed to balance strength and permeability while optimizing the compaction energy required for concrete production. A Central Composite Design (CCD) was used to design experiments within the response surface methodology (RSM) and evaluate the UCS, the porosity and permeability of pervious concrete specimens produced with varying cement content (280.00–340.00 kg/m3), the water-to-cement ratio (0.27–0.33), the aggregate-to-cement ratio (4:1–4.5:1), and compaction energy (represented by VeBe compaction time, 13–82 s). A regression model with goodness of fit (R2adjusted > 0.87) was calibrated to estimate the UCS of pervious concrete as a function of mix design parameters and VeBe compaction time (Tvc). This model can potentially guide field practices by recommending compaction strategies and mix designs for pervious concrete, achieving a desirable balance between mechanical strength and hydraulic permeability for building construction applications.

1 May 2020 in Canadian Journal of Civil Engineering
Verified
Journal Article
Closed access
EREmad Rashno
Emad Rashno
AZAmir Reza Zarrati
Amir Reza Zarrati
MTMojtaba Karimaei Tabarestani
Mojtaba Karimaei Tabarestani
Stable riprap size and optimized extension of the riprap layer around double and triple piers along the flow direction are studied experimentally. Results showed that the critical riprap failure area and stable riprap size around the first pier remain unchanged with increasing pier spacing. In addition, the largest stable riprap should always be placed in front of the first pier in comparison with the remaining downstream piers. However, by increasing the pier spacing, stable riprap size around the second and third pier increased and approached that around the first pier. A relationship was developed for designing stable riprap size in pier groups. Based on this relationship, different riprap sizes are suggested for different zones around the pier group. Experiments showed that the critical zone around the piers includes only a small area and the rest of the riprap extent area can be protected with smaller riprap stones.

21 April 2022 in Water Supply
Verified
Journal Article
Open access
PDF file
MTMojtaba Karimaei Tabarestani
Mojtaba Karimaei Tabarestani
HFHesam Fouladfar
Hesam Fouladfar
Coastal reservoirs are water storage structures constructed near the river estuary to supply water to coastal areas. One of the most important aspects related to performance of these structures is the effect of reservoir size on the flow and water quality. For this purpose, MIKE3, a 3D numerical software was used in the present work. The case study included proposed a coastal reservoir located on the coastlines of the Caspian Sea in the vicinity of Tajan River estuary. To conduct this research, four types of reservoirs with different sizes were considered. Input parameters to the model included 5-year flood of Tajan River, initial reservoir salinity and ambient temperature data. The results showed that construction of a shallower reservoir due to better surface and depth mixing could achieve higher water salinity during the desalinization period. Furthermore, the greatest water temperature change value was determined after passing hydrograph peak discharge, which shows the effect of inflow on reservoir water quality. Finally, the results of water density revealed that the decreasing trend of water density occurred mostly due to the decreasing water salinity in the reservoir.

7 January 2020 in Ish Journal of Hydraulic Engineering
Verified
Journal Article
Closed access
MTMojtaba Karimaei Tabarestani
Mojtaba Karimaei Tabarestani
ASAmin Salamatian
Amin Salamatian
MAMehdi Panahi Azad
Mehdi Panahi Azad
Placing riprap is considered as a permanent layer and common countermeasure against local scour around the bridge pier. However, the typical design of the riprap layer by using empirical equations fails to consider the uncertainties, which are involved in effective parameters on its characteristics such as the size, thickness, and extent. Therefore, there is no information about the probability of failure for the designed riprap layer. Accordingly, this study presented a method for the reliability assessment of the riprap layer considering the uncertainties which are involved in effective parameters. All three different characteristics of the riprap layer were included in the analysis by using the Monte Carlo Simulation Technique. In addition, Fault Tree Analysis was employed for combining the interactions of different parameters and calculating the probability of the failure of a riprap layer system. Further, a case study was provided to demonstrate the capability of the present method, followed by evaluating the effect of each effective parameter on the probability of failure using sensitivity analysis. The results revealed that relative riprap stone density and flow depth have the highest and the least effect on the probability of failure of riprap layer, respectively.

29 November 2023 in Innovative Infrastructure Solutions
Verified
Journal Article
Closed access
PDF file
SGSina Ghanbarynamin
Sina Ghanbarynamin
Amir Reza ZarratiAmir Reza Zarrati
Amir Reza Zarrati
MTMojtaba Karimaei Tabarestani
Mojtaba Karimaei Tabarestani