This study presents a comparative analysis of the structural performance of two innovative steel beam–column connections, namely a self-centering pinned connection with friction damper (SC-PC-FD) and a heat-treated beam section (HBS). The findings indicate that the SC-PC-FD connection exhibits stable, flag-shaped behavior, while the HBS connection can withstand applied loadings up to a rotation of 6% without any occurrence of lateral–torsional buckling. Upon comparison of these connections, it is evident that the SC-PC-FD connection can eliminate residual drifts and provide higher ductility up to a rotation of 7%, while maintaining the main members within the elastic range.
This research studies the performance of two- and four-story steel building models against progressive collapse in two cases: (1) skewed beam–column connections, and (2) straight cleated beam–beam connections. Nonlinear static and dynamic analyses were performed and then the time history analysis was performed under the simultaneous effect of the two horizontal components of three earthquake records and two column removal scenarios. The results showed that the 60-degree skewed connection had a weaker performance than the straight connection, and, according to the plastic hinge distribution, it was observed that the mentioned connection did not provide the life safety performance level.
This research presents two innovative base isolators known as the Scrap Tire Rubber Pad with Steel Rods (STRP-SR) isolator and the Magnetic Levitated (Maglev) isolator. The STRP-SR isolator offers a cost-effective solution for low-rise buildings, while the Maglev isolator provides an ideal bearing with zero horizontal stiffness. In this study, both the STRP-SR and Maglev isolators were analyzed numerically, and the experimental specimen of the Maglev isolator was tested on a shaking table. It can be concluded numerically that both isolators have the ability to significantly reduce absolute acceleration and displacement values, with average reductions of 53.24% and 100%, respectively.