Fiber reinforced polymers are key materials across different industries. The manufacturing processes of those materials have typically strong impact on their final microstructure, which at the same time controls the mechanical performance of the part. A reliable virtual engineering design of fiber-reinforced polymers requires therefore considering the simulation of the process-induced microstructure. One relevant microstructure descriptor in fiber-reinforced polymers is the fiber orientation. This work focuses on the modeling of the fiber orientation phenomenon and presents a historical review of the different modelling approaches. In this context, the article describes different macroscopic fiber orientation models such as the Folgar-Tucker, nematic, reduced strain closure (RSC), retarding principal rate (RPR), anisotropic rotary diffusion (ARD), principal anisotropic rotary diffusion (pARD), and Moldflow rotary diffusion (MRD) model. We discuss briefly about closure approximations, which are a common mathematical element of those macroscopic fiber orientation models. In the last section, we introduce some micro-scale numerical methods for simulating the fiber orientation phenomenon, such as the discrete element method (DEM), the smoothed particle hydrodynamics (SPH) method and the moving particle semi-implicit (MPS) method.

Due to its low cost and easy use, the use of material extrusion (MEX) as an additive manufacturing (AM) technology has increased rapidly in recent years. However, this process mainly involves the processing of new plastics. Combining the MEX process with polyethylene terephthalate (PET), which offers a high potential for mechanical and chemical recyclability, opens up a broad spectrum of reutilization possibilities. Turning used PET bottles into printable filament for MEX is not only a recycling option, but also an attractive upcycling scenario that can lead to the production of complex, functional parts. This work analyzes the process of extruding recycled PET bottle flakes into a filament, taking different extrusion screws and extrusion parameters into account. The filament is subsequently processed with MEX into tensile tests. An accompanying thermal, rheological and mechanical characterization of the recycled resin is performed to offer a comparison to the virgin material and a commercially available glycol modified polyethylene terephthalate (PETG) filament. The results show the importance of adequate drying parameters prior to the extrusion and the sensitivity of the material to moisture, leading to degradation. The recycled material is more prone to degradation and presents lower viscosities. Mechanical tests display a higher tensile strength of the recycled and virgin resin in comparison to the PETG. The extrusion of the used PET into a filament and the subsequent printing with the MEX process offers a viable recycling process for the discarded material.

In this paper, a new process of joining additive manufactured (AM) lattice structures and carbon fiber-reinforced plastics (CFRPs) to manufacture hybrid lattice sandwich structures without secondary bonding is investigated. Multiple variations of lattice structures are designed and 3D printed using Digital Light Synthesis (DLS) and a two-stage (B-stage) epoxy resin system. The resulting lattice structures are only partially cured and subsequently thermally co-cured with pre-impregnated carbon fiber reinforcement. The mechanical properties of the additive manufactured lattice structures are characterized by compressive tests. Furthermore, the mechanical properties of hybrid lattice sandwich structures are assessed by flexural beam testing. From compressive testing of the additive manufactured lattice structures, high specific strength can be ascertained. The mechanical behavior shows these lattice structures to be suitable for use as sandwich core materials. Flexural beam testing of hybrid lattice sandwich structures shows high strength and stiffness. Furthermore, the strength of the co-cured bond interface is high enough to surpass the strength of the lattice core.

As the applications for additive manufacturing have continued to grow, so too has the range of available materials, with more functional or better performing materials constantly under development. This work characterizes a copper-filled polyamide 6 (PA6) thermoplastic composite designed to enhance the thermal conductivity of fused filament fabrication (FFF) parts, especially for heat transfer applications. The composite was mixed and extruded into filament using twin screw extrusion. Because the fiber orientation within the material governs the thermal conductivity of the material, the orientation was measured in the filament, through the nozzle, and in printed parts using micro-computed tomography. The thermal conductivity of the material was measured and achieved 4.95, 2.38, and 0.75 W/(m·K) at 70 °C in the inflow, crossflow, and thickness directions, respectively. The implications of this anisotropy are discussed using the example of an air-to-water crossflow heat exchanger. The lower conductivity in the crossflow direction reduces thermal performance due to the orientation in thin-walled parts.