A multiple‐input–multiple‐output (MIMO) microstrip patch antenna array of four elements is proposed to cover the 5.8 GHz WLAN band. The characteristic mode analysis is carried out to design a defected ground structure that improves the MIMO performance without impacting negatively the radiation characteristics of the four‐element array. Simulations and measurements demonstrate that the implemented prototype reaches a maximum mutual coupling of −32 dB and a gain‐per‐element of 5.3 dB with good MIMO attributes, surpassing many other proposals in the antenna literature: maximum envelope correlation coefficient of 0.0001, diversity gain very close to 10 dB, capacity loss near to 0.0023 bps/Hz at the resonant frequency, multiplexing efficiency of 0.935, and a total active reflection coefficient weakly dependent on the excitation phases. The presented design is proposed for operation on the IEEE 802.11a/n standard.

This article presents a symmetrical reduced-size eight-element MIMO antenna array with high electromagnetic isolation among radiators. The array utilizes easy-to-build techniques to cover the n77 and n78 new radio (NR) bands. It is based on an octagonal double-negative metamaterial split-ring resonator (SRR), which enables a size reduction of over 50% for the radiators compared to a conventional disc monopole antenna by increasing the slow-wave factor. Additionally, due to the extreme proximity between the radiating elements in the array, the modal significance (MS) method was employed to identify which propagation modes had the most impact on the electromagnetic coupling among elements. This approach aimed to mitigate their effect by using an electromagnetic barrier, thereby enhancing electromagnetic isolation. The electromagnetic barriers, implemented with strip lines, achieved isolation values exceeding 20 dB for adjacent elements (<0.023 λ) and approaching 40 dB for opposite ones (<0.23 λ) after analyzing the surface current distribution by the MS method. The elements are arranged in axial symmetry, forming an octagon with each antenna port located on a side. The array occupies an area of 0.32 λ² at 3.5 GHz, significantly smaller than previously published works. It exhibits excellent performance for MIMO applications, demonstrating an envelope correlation coefficient (ECC) below 0.0001, a total active reflection coefficient (TARC) lower than −10 dB for various incoming signals with random phases, and a diversity gain (DG) close to 20 dB.

A detailed statistical analysis of the total active reflection coefficient (TARC) is carried out in this paper for three 4-port MIMO antennas featuring different levels of isolation across its ports. This analysis is very useful to determine the most likely performance of a MIMO antenna in a real communications scenario. The TARC parameter is commonly evaluated for only several combinations of the random phase with which a signal reaches every input port of a MIMO antenna. By contrast, we have evaluated a million combinations to obtain the probability density function of the TARC, using frequency as its parameter. In this way, an expected value of the TARC is obtained for each frequency, as well as a confidence interval ($\Delta C{I}_{\mathrm{TARC}}$) where the TARC values occur with 90% probability. Additionally, we have introduced the term “TARC shadow”, a visual representation of the TARC as a function of the frequency where the probability function is projected into this 2D graphic with different colors to identify the most likely values of the TARC. To demonstrate these concepts, a full TARC evaluation was performed for three 4-port MIMO antennas with increasing isolation of 12.9 dB, 25.4 dB, and 37 dB between elements, and different values of the $S_{nn}$ and $S_{nm}$ parameters, with n and $m=$ 1 to 4. From this study, the importance of the isolation among ports and its comparison with the return losses becomes evident in achieving a MIMO antenna array insensitive to random phase variations occurring in the communication channel.

In this paper, an easy-to-program mathematical expression to compute the Envelope Correlation Coefficient (ECC) between two antennas by using their radiated electric fields at the far-field region is derived. The main advantage of the resulting algorithm is its higher speed to obtain results compared to those used in commercial software. This novel approach presents a discrete equation that can be employed after obtaining the electric field in spherical coordinates by computer simulations. Thus, another alternative arises to report this metric for low or high radiation efficiency antennas, instead of the less accurate S-parameter-based equation, which does not ensure high accuracy when low radiation efficiency antennas are under study. A comparison between the presented algorithm and the results given by commercial software is shown and discussed, in which is clearly observed that the results are greatly convergent, but with the advantage of achieving a lesser time computing period by the proposed method.

This work presents the use of a novel impedance coupling technique and electrical length increase by using stub loading placed from the radiator to the ground plane. This method is applied to the design of a small four-element ultrawideband (UWB) MIMO antenna arranged in axial symmetry to achieve a compact array size while obtaining a bandwidth starting from a very low cutoff frequency compared to a conventional radiator operating at the same frequency. The four-element MIMO antenna, with an operational bandwidth of 1.9 GHz to 30 GHz, is based on a wideband monopole with a semicircular geometry, fed by a coplanar structure and an L-shaped half-ground plane section. To increase the electrical length of the structure and achieve a compact antenna design, reactive stub loading is introduced, placing it on the backside of the substrate, located orthogonally between the radiator and the L-shaped ground plane, obtaining a small-sized configuration. The axial symmetry is employed to increase the antennas’ isolation by taking advantage of the orthogonal positioning and making the radiated fields have a low correlation. The antenna array footprint measures 48 mm × 48 mm, corresponding to 0.3λ₀ × 0.3λ₀ at the lower cutoff frequency. The array exhibits a low envelope correlation coefficient (ECC) of around 0.033 at 2 GHz, and less than 0.001 at the rest of the bandwidth; a diversity gain (DG) of approximately 10; a stable total active reflection coefficient (TARC) below −10 dB; interport isolation between 20 and 40 dB; and an average gain of 2.8 dBi.

This work presents a compact four-port MIMO antenna with each radiator consisting of a conventional two-monopole array fed at a single point by a coplanar line and reactively loaded with a stub. The incorporation of a T-stub-loaded tuning technique significantly improves the radiating element’s impedance, leading to deeper port coupling, a broader bandwidth, and an increased electrical length. Consequently, the operating frequency is substantially lower compared to a standalone radiator. By implementing this configuration with two monopoles of different lengths fed at the same end, an ultra-wideband effect is achieved. By placing four of these stub-loaded monopole arrays in an axial symmetric configuration, a MIMO antenna array is formed. The proposed MIMO array operates from 2.89 GHz to 12 GHz, exhibiting a TARC of less than −10 dB, an ECC of less than 0.002, an average diversity gain of 9.999, and port isolations are within a threshold from −18 dB to −50 dB over the entire bandwidth. The array’s footprint is 32 × 32 mm², equivalent to 0.083${\lambda }_0^2$ at the lower cutoff frequency.