Ivo Draganov Ivanov

Dr. Ivo Draganov Ivanov

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 October 2018 in Transport Problems
Verified
Journal Article
Open access
PDF file
YAYulian Angelov
Yulian Angelov
IIIvo Draganov Ivanov
Ivo Draganov Ivanov
This work presents some aspects related to the designing of a roller for stands that are intended to determine the parameters of the transmission of a vehicle, such as braking force, wheel revolutions, etc. The computational scheme of simply supported beam is used to create an analytical mechanical-mathematical model through which a multicriteria optimization problem has been solved. A finite element macro and submodel of the roller has been created, and by using the R1MS technique, the fatigue strength in the welding seams in the roller has also been determined. A parametric analysis is accomplished to determine the influence of the thickness of the base steel and the covering ebonite layer on the perimeter change of the outer surface, taking into account the physical non-linearity of the outer layer.

22 June 2024 in ENVIRONMENT. TECHNOLOGIES. RESOURCES. Proceedings of the International Scientific and Practical Conference
Verified
Journal Article
Open access
PDF file
IIIvo Draganov Ivanov
Ivo Draganov Ivanov
LLLyobomir Lazov
Lyobomir Lazov
This work presents the current state of the numerical modeling of laser transmission welding. A review of publications with a similar theme was made and some aspects that remained outside the focus of the authors were highlighted. Laser transmission welding is a technological process, the physical description of which requires the consideration of several physical laws, which are discussed here. Works were reviewed in which the numerical model is based on: the law of conservation of energy, Fourier's law of heat transfer, Lambert-Beer's law of light propagation, Newton's law of convective heat transfer, Stefan-Boltzmann's law of radiant heat transfer, the Navier-Stokes equation for a fluid, the laws of mechanics for a deformable solid along with the criteria for plasticity. Since their joint solution in analytical form is not possible, the authors' approach is to single out one or several of the laws and use numerical methods to solve the differential equations that describe them. In this work, the use of several numerical methods is considered, and the finite element method is most often used for the discretization of space. The programs used by the authors for the numerical modeling of laser transmission welding are mentioned. The results obtained for the temperature field, heat affected zone and weld pool dimensions, voids, material degradation, residual stresses and weld pool flow rate are discussed. Particular attention is paid to the issues of calibration, verification and validation of numerical models. Some conclusions and directions are highlighted, emphasizing not so much the physical interpretation of the obtained results, but the essence of numerical modeling.

27 May 2022 in Defect and Diffusion Forum
Verified
Journal Article
Closed access
PDF file
IIIvo Draganov Ivanov
Ivo Draganov Ivanov
NFNikolay Ferdinandov
Nikolay Ferdinandov
In this paper, two numerical models of friction stir welding of two aluminum plates are considered. The coupled mechanical-temperature problem is solved with explicit integration over the time. The two models are based on the finite elements method (FEM) and have different complexity and number of participating parameters. The aim of the development is to highlight the weaknesses and strengths of the models of different complexity. The first model is simpler and it is based on the free penetration of the tool into the parts. The second model is based on the arbitrary Lagrange-Euler method and take in to the account the instrument penetration that allows to take into account the movement of the material in the process area. Convective and radiative heat transfers are accounted in the two models. The results for the temperature, stress and strain in the welded joint are studied and compared. The calculation time is given for each model. A parametric analysis was performed for the influence of the rotational speed of the pin, welding velocity and the pressing force. The influence of the temperature dependent physical properties of the welded plates is determined and compared for the both finite element models.

30 September 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
IIIvo Draganov Ivanov
Ivo Draganov Ivanov
VVVenko Vitliemov
Venko Vitliemov
YAYuliyan Angelov Angelov
Yuliyan Angelov Angelov
SMStiliyana Mileva
Stiliyana Mileva
NFNikolay Vasilev Ferdinandov
Nikolay Vasilev Ferdinandov
Rossen H. RadevRossen H. Radev
Rossen H. Radev
This paper proposes a methodology for multi-criteria calibration of a thermo-mechanical model for numerical simulation of welding in vacuum. A finite element model of a steel plate is created. Experimental and computational data are obtained. An inverse problem is formulated for the vector identification of five calibration parameters from the heat flow model. They are evaluated for adequacy with controlled accuracy according to four criteria. An optimization problem is solved using a two-step interactive procedure. The parameter space studying method (PSI) has been applied to the study of multidimensional regions by means of quasi-uniform sounding. A Pareto-optimal set is defined. It is used to determine reduced ranked Pareto subsets by -selection. Salukvadze optimum is also determined.

Verified
Journal Article
Open access
PDF file
IIIvo Draganov Ivanov
Ivo Draganov Ivanov
VVVenko Vitliemov
Venko Vitliemov
YAYuliyan Angelov Angelov
Yuliyan Angelov Angelov
SMStiliyana Mileva
Stiliyana Mileva
NFNikolay Vasilev Ferdinandov
Nikolay Vasilev Ferdinandov
Rossen H. RadevRossen H. Radev
Rossen H. Radev
This paper proposes a procedurefor multi-criteria calibration of a thermo-mechanical model for numerical simulation of welding in the space vacuum. A finite-element model of a steel plate is created. Experimental and computational data are obtained. An inverse problem is formulated for the vector identification of five calibration parameters from the heat-flow model. They are evaluated for adequacy with controlled accuracy according to four criteria. An optimization problem is solved using a two-step interactive procedure. The parameter space studying method (PSI) has been applied to the study of multidimensional regions by means of quasi-uniform sounding. A Pareto-optimal set is defined. It is used to determine reduced ranked Pareto subsets by μ-selection. Salukvadze optimum is also determined.

28 August 2023 in Materials Science Forum
Verified
Journal Article
Closed access
PDF file
IIIvo Draganov Ivanov
Ivo Draganov Ivanov
DGDanail Gospodinov
Danail Gospodinov
RRRossen Radev
Rossen Radev
NFNikolay Ferdinandov
Nikolay Ferdinandov
In the present work, a finite element model of the first stage, plunge, of friction stir welding is considered. The welded parts are flat aluminum 1050 plates. The arbitrary Lagrangian-Eulerian formulation implemented in ABAQUS/Explicit is used. The material model of the welded parts is the Johnson-Cook law, and Coulomb’s law describes the friction between the tool and the weldment. Temperature field during the process is obtained, and the influence of the parameters concerning the algorithmic implementation of the finite element method is established. The simulation results are compared with experimental results obtained for this purpose.