The conventional iron and steel industry (ISI), driven by coal utilization as its predominant feedstock, constitutes a substantial source of greenhouse gas emissions. Hydrogen metallurgy presents the opportunity to mitigate carbon emissions in ISI from the origin. Among hydrogen metallurgical approaches, the hydrogen-based direct reduction iron (H-DRI) process stands out for its substantial carbon reduction capabilities and established technological maturity. The present paper provides a comprehensive review of the development and application surrounding the H-DRI process. Firstly, the main chemical reactions of H-DRI and the relevant important parameters are introduced. Subsequently, an overview is provided of several prominent H-DRI processes, including HYL, Midrex, Midrex-H2®, HYL-III, HYL-ZR, BL, and Finmet, elucidating their characteristics through comparative analysis. Moreover, some research results of H-DRI process optimization are summarized. Leveraging insights garnered from globally representative projects exemplifying the industrial deployment of H-DRI technology in recent years, the trajectory of and prospective trends for industrial development in the field of H-DRI processes are explored. Further, prevailing challenges and impediments encountered in the adoption of H-DRI processes are identified, culminating in strategic recommendations tailored towards fostering future advancements. In the long term, the H-DRI process is expected to become a key path to achieve ISI cleaner production.
The traditional production mode using coal as the main energy source is not conducive to the sustainable development of the iron and steel industry (ISI). The hydrogen-based direct reduction shaft furnace (HDRSF) process is a feasible technical route for promoting the green development of the ISI. However, there is a lack of comprehensive analysis with respect to the energy utilization and process flow of the HDRSF method. To address these issues, a systemic material–energy–exergy model of HDRSF is established. An improved HDRSF process incorporating waste heat recovery is also proposed, and energy consumption intensity and exergy intensity are used as assessment metrics. This study’s findings indicate that the proposed waste heat recovery can considerably lower gas demand and energy consumption intensity, but exergy intensity has little effect. The reducing gas demand drops from 2083 m3 to 1557 m3, the energy consumption intensity drops from 2.75 × 107 kJ to 1.70 × 107 kJ, and the exergy intensity drops from 1.08 × 107 kJ to 1.05 × 107 kJ when the reducing gas temperature is 900 °C, H2:CO = 1:1; meanwhile, the recovery rate of waste heat reaches 40%. This study can serve as a reference for actual HDRSF process production.
25 September 2025 in Sustainable Energy, Grids and Networks
The extensive research and application of integrated energy systems (IES) coupled with renewable energy sources have played a pivotal role in alleviating the problems of fossil energy shortage and promoting sustainability to a certain extent. However, the uncertainty of photovoltaic (PV) and wind power in IES increases the difficulty of maintaining stable system operation, posing a challenge to long-term sustainability. In addition, the capacity configuration of each device in IES and the operation strategy under different conditions will also significantly impact the operation cost and expected results of the system, influencing its overall sustainability. To address the above problems, this paper establishes an optimization model based on linear programming to optimize the equipment capacity and operation strategy of IES coupled with PV and wind power with the minimum total annual cost as the objective function, thereby promoting economic sustainability. Moreover, an integrated assessment framework, including economic, energy efficiency, and environmental aspects, is constructed to provide a comprehensive assessment of the operation of IES, ensuring a holistic view of sustainability. Finally, taking the IES of an industrial park in Xi’an, China, as the specific case, sensitivity analysis is used to explore the impact of a variety of critical parameters on the equipment capacity and operating strategy. Additionally, the Monte Carlo method is used to explore the impact of source-load uncertainty on the performance of the IES. The results show that the facilitating or constraining relationship between renewable energy access and the cascading utilization of combined heat and power generation (CHP) energy depends on the relative magnitude of the user load thermoelectric ratio to the prime mover thermoelectric ratio. To cope with the negative impact of source-load uncertainty on the stable operation of the IES, the capacities of the electric chiller and absorption chiller should be increased by 4.0% and 5.8%, respectively. It is worth noting that the increase in the penetration rate of renewable energy has not changed the system’s dependence on the grid.
In the present study, the Homotopy Levenberg−Marquardt Algorithm (HLMA) and the Parameter Variation Levenberg–Marquardt Algorithm (PV–LMA), both developed in the context of high-temperature composition, are proposed to address the equilibrium composition model of plasma under the condition of local thermodynamic and chemical equilibrium. This model is essentially a nonlinear system of weakly singular Jacobian matrices. The model was formulated on the basis of the Saha and Guldberg–Waage equations, integrated with Dalton’s law of partial pressures, stoichiometric equilibrium, and the law of conservation of charge, resulting in a nonlinear system of equations with a weakly singular Jacobian matrix. This weak singularity primarily arises due to significant discrepancies in the coefficients between the Saha equation and the Guldberg–Waage equation, attributed to differing chemical reaction energies. By contrast, the coefficients in the equations derived from the other three principles within the equilibrium composition model are predominantly single−digit constants, further contributing to the system’s weak singularity. The key to finding the numerical solution to nonlinear equations is to set reasonable initial values for the iterative solution process. Subsequently, the principle and process of the HLMA and PV–LMA algorithms are analyzed, alongside an analysis of the unique characteristics of plasma equilibrium composition at high temperatures. Finally, a solving method for an arc plasma equilibrium composition model based on high temperature composition is obtained. The results show that both HLMA and PV–LMA can solve the plasma equilibrium composition model. The fundamental principle underlying the homotopy calculation of the (n−1) −th iteration, which provides a reliable initial value for the n−th LM iteration, is particularly well suited for the solution of nonlinear equations. A comparison of the computational efficiency of HLMA and PV–LMA reveals that the latter exhibits superior performance. Both HLMA and PV–LMA demonstrate high computational accuracy, as evidenced by the fact that the variance of the system of equations ||F|| < 1 × 10−15. This finding serves to substantiate the accuracy and feasibility of the method proposed in this paper.