Aske Folkmann Musaeus

Mr. Aske Folkmann Musaeus

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 June 2024 in Water Resources Research
Verified
Journal Article
Open access
AMAske Folkmann Musaeus
Aske Folkmann Musaeus
CKCecile Marie Margaretha Kittel
Cecile Marie Margaretha Kittel
JLJakob Luchner
Jakob Luchner
MFMonica Coppo Frias
Monica Coppo Frias
PBPeter Bauer-Gottwein
Peter Bauer-Gottwein
Forecasting flood and drought events requires accurate modeling tools. Hydraulic river models are based on estimates of riverbed geometry which are traditionally collected in situ. The novel Ice, Cloud and Land Elevation Satellite 2 [ICESat‐2] lidar altimetry mission with 6 simultaneous high‐resolution laser beams provides the opportunity to define river cross‐section geometries as well as observe water surface elevation [WSE] and water surface slope spatially resolved along the river chainage. This paper describes a method to utilize terrain altimetry and water surface slope estimates to define complete river geometries from ICESat‐2 data products, using the diffusive wave approximation to calculate depth in the submerged section not penetrated by the lidar. Exemplifying the method, cross‐sections are defined for a stretch of the Mekong River. Hydrodynamic model results of the stretch are compared with ICESat‐2 WSE estimates and in situ gauging station time series. Insights in river characteristics from satellite imagery and the ICESat‐2 slope estimates allow for fine‐tuning of the cross‐sections using spatially varying Manning numbers. The final model achieves a root mean square error against the ICESat‐2 WSE of 0.676 m and average Kling‐Gupta Efficiency against gauging station time series of 0.880. The method is limited by the diffusive wave approximation resulting in inaccurate cross‐section estimates in sections with supercritical flow or significant acceleration. Errors can be identified from ICESat‐2 WSE estimates and reduced with additional cross‐sections. Combined with hydrological models, the method will allow for cross‐section definition without in situ data.

29 November 2023 in Geophysical Research Letters
Verified
Journal Article
Open access
JLJun Liu
Jun Liu
PBPeter Bauer-Gottwein
Peter Bauer-Gottwein
MFMonica Coppo Frias
Monica Coppo Frias
AMAske Folkmann Musaeus
Aske Folkmann Musaeus
LCLinda Christoffersen
Linda Christoffersen
LJLiguang Jiang
Liguang Jiang
With increasing coverage, density, and accuracy of the global inland water altimetry record, remote sensing observations of water surface elevation (WSE) and water surface slope (WSS) are becoming available for the world's rivers. In steady, uniform flows, WSS is invariable, while there is a unique one‐to‐one relationship between WSE and discharge, the rating curve. While the assumptions of steady uniform flow are appropriate for many rivers, they are violated upstream of river confluences. We present a simple analytical hydraulic model of river confluences using the theory of steady, gradually varied flow. We apply the model to four river confluences in the Mississippi‐Missouri river system. We determine the spatial extent of the backwater‐affected zones and map WSE‐discharge and WSS‐discharge relationships. We show that coincident measurements of WSE and WSS from new satellite altimetry missions effectively constrain discharge estimates from space in the backwater‐affected zones upstream of river confluences.

29 October 2024 in Remote Sensing
Verified
Journal Article
Open access
PDF file
PBPeter Bauer-Gottwein
Peter Bauer-Gottwein
LCLinda Christoffersen
Linda Christoffersen
AMAske Folkmann Musaeus
Aske Folkmann Musaeus
MFMonica Coppo Frías
Monica Coppo Frías
KNKarina Nielsen
Karina Nielsen
The ICESat-2 and SWOT satellite earth observation missions have provided highly accurate water surface slope (WSS) observations in global rivers for the first time. While water surface slope is expected to remain constant in time for approximately uniform flow conditions, we observe time varying water surface slope in many river reaches around the globe in the ICESat-2 record. Here, we investigate the causes of time variability of WSSs using simplified river hydraulic models based on the theory of steady, gradually varied flow. We identify bed slope or cross section shape changes, river confluences, flood waves, and backwater effects from lakes, reservoirs, or the ocean as the main non-uniform hydraulic situations in natural rivers that cause time changes of WSSs. We illustrate these phenomena at selected river sites around the world, using ICESat-2 data and river discharge estimates. The analysis shows that WSS observations from space can provide new insights into river hydraulics and can enable the estimation of river discharge from combined observations of water surface elevation and WSSs at sites with complex hydraulic characteristics.

14 March 2026
Verified
Conference Paper
Open access
SKSimon Köhn
Simon Köhn
CCConnor Chewning
Connor Chewning
AMAske Folkmann Musaeus
Aske Folkmann Musaeus
PAPhillip Aarestrup
Phillip Aarestrup
RLRoland Löwe
Roland Löwe
KNKarina Nielsen
Karina Nielsen
Floods are among the most devastating natural disasters, affecting both developed and developing regions. However, developing countries often lack sufficient monitoring and early warning systems, making them more vulnerable. The ESA EO4FLOOD project aims to enhance flood forecasting by integrating satellite data with hydrologic and hydraulic models. Within this effort, we introduce a novel joint modelling framework that couples hydrologic and hydraulic models using differentiable programming.Hydraulic and hydrologic models are constrained by data and traditionally rely on in situ measurements, which are expensive to obtain, may be access-limited, and can be dangerous to collect in remote terrain or during crises. Remotely sensed data from satellites or airborne campaigns offer a potent and low-cost alternative, with satellites providing data irrespective of national or geographic borders. Hydraulic-geometric parameters, water surface elevations (WSE), and slopes (WSS), as well as inputs to the hydrologic model, can be resolved through remote sensing.With the launch of the Surface Water and Ocean Topography (SWOT) satellite mission, high-accuracy spatially distributed (2D) WSE and WSS observations have become available at a global scale. The primary instrument is a Ka-band radar interferometer that observes two, 50km wide swaths on each side of the ground track of the satellite, with a science requirement to detect rivers larger than 100m in width; however, even smaller rivers can be measured. The ICESat-2 satellite enables accurate global WSS and river topography observations, which can be locally substituted by national topographic LIDAR missions.We present a differentiable hydraulic-hydrologic framework integrating large-scale Earth observation (EO) data while maintaining physical consistency. Both models are jointly trained using SWOT data, with the output of the hydrologic model serving as input to the hydraulic model. Joint training enables both models to benefit from the information contained in the SWOT data, as well as potentially satellite earth observations of additional state variables (e.g., soil moisture, evapotranspiration, terrestrial water storage). Additionally, the coupled approach allows independence from rating-curve-based discharge, marking a significant leap forward in the global applicability of hydraulic models.We demonstrate this approach on the Torne River, located between northern Sweden and Finland. With extensive in-situ data, Torne provides an ideal case for validation. Our joint model supports accurate water level and discharge forecasting, aiding flood preparedness, informing local adaptation strategies, and enhancing climate resilience. This proof of concept highlights the method’s global potential under the EO4FLOOD initiative.

5 October 2026
Verified
Preprint
Open access
PDF file
MFMonica Coppo Frias
Monica Coppo Frias
CKCecile Marie Margaretha Kittel
Cecile Marie Margaretha Kittel
KNKarina Nielsen
Karina Nielsen
MSMohammad Shamsudduha
Mohammad Shamsudduha
SHSazzad Hossain
Sazzad Hossain
MFMonica Coppo Frias
Monica Coppo Frias
Low-lying deltas are highly vulnerable to fluvial-coastal compound-flooding from interactions between coastal forcings and river discharge, yet observations spanning the river-estuary-ocean continuum remain sparse. We use the SWOT (Surface Water and Ocean Topography) satellite data (L2 HR Raster product) to build continuous river-ocean water surface elevation (WSE) profiles for the Padma (Ganges)-Meghna River system in the Bengal Delta and the Mekong Delta. We develop a raster-based processing workflow that filters outliers and fills gaps assuming along-channel continuity, producing continuous WSE river-coastal profiles. Validation against in-situ gauges yields an RMSE of 0.32 m in the Mekong and 0.34 m in the Meghna after correcting for the datum offset. To overcome SWOT temporal sampling limitations, we densify observations by periodic tidal phase and seasonal discharge regime. This enables quantitative tracking of tidal trough penetration and tidal-wave celerity estimates in the Padma-Meghna system, where a long continuous reach is sampled by the same SWOT overpass. This quantification reveals that discharge primarily controls tidal-trough celerity and upstream penetration, while the tidal amplitude mainly modulates trough sharpness. In the Mekong Delta, SWOT profiles reveal coherent WSE modulations due to discharge and tide interactions, but the SWOT pass orientation limits robust celerity and tidal trough penetration estimation. These results show that SWOT can quantify tide-discharge interactions where temporal densification is combined with suitable regional satellite coverage and river geometry, and support analyses of tidal propagation and backwater effects to inform compound-flood modelling in climate-vulnerable deltas.

1 September 2026 in EGUsphere
Verified
Preprint
Open access
PDF file
AMAske Folkmann Musaeus
Aske Folkmann Musaeus
SKSimon Jakob Köhn
Simon Jakob Köhn
JLJakob Luchner
Jakob Luchner
CKCécile Marie Margaretha Kittel
Cécile Marie Margaretha Kittel
KNKarina Nielsen
Karina Nielsen
PBPeter Bauer-Gottwein
Peter Bauer-Gottwein
River cross-sections, i.e. riverbed elevation profiles across the river, are required for hydrodynamic modeling in flood risk assessment and flood forecasting but are expensive and time-consuming to survey in the field. Remotely sensed cross-sections can fill the gap in data-scarce areas, with novel satellite missions enabling increased accuracy compared to previous methods. We present a method for estimating river cross-sections from lidar altimetry products and a discharge time series. The exposed cross-section is delineated using high spatial resolution ICESat-2 or airborne lidar point clouds. The submerged section is then inferred using water surface slope from the lidar products together with a discharge input. Assuming the diffusive wave approximation, the energy slope is taken to be equal to the estimated water surface slope. Manning’s equation is subsequently applied to estimate the conveyance at the time of observation. Finally, the full section is defined assuming a roughness parameter and a conceptual submerged shape. The method is implemented in an open-source python package called lidarcross, enabling users to define cross-sections for hydrodynamic models in data-scarce areas. Validation is performed using examples from four surveyed rivers spanning a range of spatial scales. Area and conveyance curves derived from surveyed and lidar-based cross-sections are compared, yielding median WSE differences of approx. 0.5 m. The results demonstrate that the method successfully captures the hydraulic behavior of the channel. Residual errors are primarily attributed to uncertainties in discharge and water surface slope estimates.