The Birge-Massart threshold wavelet methods were used to denoise lightning transient electrical signals, compared with the traditional de-noising methods such as Smoothing filter and FIR digital low-pass filter. The Means square error (MSE) and Magnitude error (ME) of simulation signals were calculated to compare the de-noising effect. The double exponential-decay pulse signals and Gaussian white-noise were composed as the simulating signals. The measured signals were also used to de-nosing with traditional and wavelet threshold methods. The results of simulation data and measured ones proved that the Birge-Massart threshold wavelet method was better than the traditional ones.
1 August 2021 in Recent Advances in Electrical & Electronic Engineering (Formerly Recent Patents on Electrical & Electronic Engineering)
Background: Lightning electromagnetic pulse (LEMP) and high-altitude electromagnetic pulse (HEMP) are widely described by three physical parameters (rise time tr, full-width at halfmaximum pulse width tw, and maximum electric field strength E0). These pulse shapes are often given by a double exponential form concerning four mathematical parameters, namely α, β, k and Ep. Objective: The transformation from physical parameters into mathematical parameters is necessary in waveform simulation and is traditionally accomplished by linear fit functions regarding the two groups of parameters. However, traditional methods commonly rely on data analysis and calculation. In order to obtain the mathematical parameters more concisely and clearly. Methods: In this paper, a numerical method to calculate the mathematical parameters by solving nonlinear equations with three key constraints is proposed. Firstly, we establish the nonlinear system of equations regarding four variables, namely t1, t2, α and β. Then, three constraints are given to converge the solutions of the equations. Lastly, select the minimal value of the convergent solution of each equation. Results: Comparing the solutions obtained by our proposed method to the iterated ones, the overall relative error is less than 2×10-8. Conclusion: The results show that our proposed method not only simplifies the transformation from physical parameters to mathematical parameters, but also keeps the solutions high accurate.
The Spaceborne Global Lightning Location Network (SGLLN) serves the purpose of identifying transient lightning events occurring beneath the ionosphere, playing a significant role in detecting and warning of disaster weather events. To ensure the effective functioning of the wideband electromagnetic pulse detector, which is a crucial component of the SGLLN, it must be tested and verified with specific signals. However, the inherent randomness and unpredictability of lightning occurrences pose challenges to this requirement. Consequently, a high-power electromagnetic pulse radiation system with a 20 m aperture reflector is designed. This system is capable of emitting nanosecond electromagnetic pulse signals under pre-set spatial and temporal conditions, providing a controlled environment for assessing the detection capabilities of SGLLN. In the design phase, an exponentially TEM feed antenna has been designed firstly based on the principle of high-gain radiation. The feed antenna adopts a pulser-integrated design to mitigate insulation risks, and it is equipped with an asymmetric protective loading to reduce reflected energy by 85.7%. Moreover, an innovative assessment method for gain loss, based on the principle of Love’s equivalence, is proposed to quantify the impact of feed antenna on the radiation field. During the experimental phase, a specialized E-field sensor is used in the far-field experiment at a distance of 400 m. The measurements indicate that at this distance, the signal has a peak field strength of 2.2 kV/m, a rise time of 1.9 ns, and a pulse half-width of 2.5 ns. Additionally, the beamwidth in the time domain is less than 10°. At an altitude of 500 km, the spaceborne detector records a signal with a peak field strength of approximately 10 mV/m. Particularly, this signal transformed into a nonlinear frequency-modulated signal in the microsecond range across its frequency spectrum, which is consistent with the law of radio wave propagation in the ionosphere. This study offers a stable and robust radiation source for verifying spaceborne detectors and establishes an empirical foundation for investigating the impact of the ionosphere on signal propagation characteristics.
Wideband electromagnetic pulse detection is a crucial method for lightning disaster monitoring. However, the random nature of lightning events presents challenges in fulfilling real-time calibration requirements for electromagnetic pulse sensors. This paper introduces a segmented ultra-wideband TEM horn antenna tailored for portable calibration experiments in electromagnetic pulse detection systems. The radiating plates feature a four-section polygonal design, and an end-loaded metal plate is integrated to reduce reflection signal interference. Rigorous simulation analyses were performed on three key factors impacting antenna radiation performance: aperture impedance, tapering profile, and end loading configuration. Experimental results show that the designed antenna achieves a peak field strength of 48.9 V/m at a 10 m distance, with a rise time of 0.87 ns and a full width at half maximum of 1.75 ns. The operating frequency ranges from 48 MHz to 150 MHz, with main lobe beamwidths of 43° and 83° in the E-plane and H-plane radiation patterns, respectively. These parameters meet the technical requirements for electromagnetic pulse sensor calibration experiments.
9 November 2023 in Frontiers in Astronomy and Space Sciences
Introduction: On the propagation path to the satellite, the ionosphere will distort the nuclear electromagnetic pulse (NEMP) and change its physical properties.Methods: This paper proposes a method for calculating the propagation of NEMP to the satellite. The method decomposes NEMP into the superposition of simple harmonic waves, and each simple harmonic wave is calculated separately in the ionosphere. With the consideration of different time of arrival and critical frequency of the ionosphere, the NEMP after propagating in the ionosphere is obtained by superposition of simple harmonic waves in time domain rather than the inverse Fourier transform which will erase the time domain information.Results: The results show that NEMP is dispersive in ionosphere with the pulse broadened, the speeds changed and the bandwidth narrowed. The time-frequency spectrum can provide the frequency band where the signal energy is located.Discussion: Our proposed method provides a simple and effective way to calculate the NEMP propagation in the ionosphere, which should afford help to the design of NEMP receivers and the selection of satellite orbit altitude.
In this study, we analyzed a rare hard, bright X‐ray burst associated with intense natural lightning. Through spectral analysis and source model fitting, we demonstrate that the energy spectrum of the X‐ray source region exhibits significant uncertainty due to the strong dependence on radiation beam geometry, which may appear as a TGF‐like hard spectrum. The X‐ray burst is estimated to produce approximately 10 13 to 10 14 source photons (>30 keV), which is 1–2 orders of magnitude higher than a typical X‐ray burst and comparable to the brightness of downward TGFs. The hard, bright X‐ray burst challenges the traditional classification boundary between soft/weak X‐rays and hard/strong TGFs, suggesting that both may exist in a continuous spectrum. The generation mechanism for such hard, bright X‐ray bursts may involve Relativistic Runaway Electron Avalanche processes, though likely in an incomplete stage.