There is little research on the viscosity profile analysis of cowpea cotyledon flour (CCF). Due to the new ways of using pulses grains in the diet, it is important to evaluate the viscoamylographic behavior of raw and processed CCF. The CCF was obtained from the cultivars BRS Guariba and BRS Novaera and evaluated in the Rapid Visco Analyzer (RVA). For raw CCF it was used the “Standard 1” program. The extruded CCF was obtained from the cultivar BRS Guariba, which was processed following a central rotational composite design, combining thermoplastic extrusion temperatures (124; 130; 145; 160; 166 °C) and conditioning moisture (16.2%; 17%; 19%; 21%, 21.8%). The obtained extrusions were ground (Ø > 0.5 mm) and evaluated in the RVA using the program “Extrusion 2”. The raw CCF from BRS Guariba presented higher protein, lipid and mineral content and lower carbohydrate content than BRS Novaera. The raw CCF from BRS Guariba showed lower values of pasting temperature (79.35 °C), viscosity breakdown (103.00 cP) and seatback (1447.33 cP) compared to raw CCF from BRS Novaera. The extrusion process drastically changed all viscosity parameters, increasing the initial viscosity value and decreasing the value of other parameters. The extruded CCF had different pasting properties. CCF extruded at 166 °C and 19% moisture resulted in flours with higher initial viscosity and lower retrogradation values, which can be used as a thickener in food products, in addition to increase nutritional value.
1 January 2023 in Brazilian Journal of Food Technology
Cowpea is grown mainly in regions with a hot semi-arid climate, where other pulses do not develop satisfactorily. It is the 4th most produced pulse in the world, thus supplying the domestic and export markets. Following the trends of the food products market, a study was carried out to identify the best condition of the extrusion process, to transform these nutritious grains into quality expanded products and ready for consumption. The grains were decorticated and transformed into cotyledon flour. This flour was conditioned and the Evolum HT25 twin screw extruder feeder was adjusted to a rate of 7 kg h-1. A Box-Behnken 23 design was used, considering the following variables and levels: extrusion temperature from 100 °C to 140 °C (in the 7th to 10th zone), screw speed (300 to 700 rpm) and conditioning moisture from 12% to 16%. The temperature affected linearly and negatively (p ≤ 0.05) the sectional expansion index (2.65 to 7.64). The screw speed interfered linearly and positively (p ≤ 0.05) in the longitudinal (1.12 to 9.32) and volumetric (4.91 to 24.15) expansion index, and negatively with the water absorption index (3.05 to 3.86 g g-1). The screw speed (positive linear and negative quadratic), the moisture content (negative quadratic) and the interaction (positive) between the two interfered (p ≤ 0.05) in the water solubility index (25.89% to 33.85%). The hardness value (1.24 to 2.83 N) was affected (p ≤ 0.05) by screw speed (negative linear and positive quadratic), temperature (negative quadratic), moisture (positive quadratic), and interactions of moisture with temperature and screw speed. To obtain a hardness value close to that of commercial extrudates and high-water solubility, the maximum global desirability obtained was 0.81 for extrusion at 135.6 °C, 700 rpm and 12% moisture.
22 August 2022 in Food Science and Technology International
A simplex-centroid design was used to evaluate the effect of proportions (0 to 100%) of whole wheat flour (WWF), whole mung bean flour (WMF) and whole rice flour (BRF) on the quality of cookies savory. The dough cut in the shape of a disks (37 mm × 2 mm) showed a 13% retraction in diameter when they contained exclusively WWF, it was less intense (5%) with BRF and null (0%) with WMF. The dough expansion occurred only vertically, the thicknesses of the WWF, WMF and BRF biscuits were 5.33, 2.79 and 2.13 times greater than the initial dough height, respectively. This characteristic showed high correlations with volumetric expansion (r = 0.95), specific volume (r = 0.90), hardness (r = 0.92), fracturability (r = 0.93) and spread factor (r = −0.96). BRF increased the value of the color difference of the biscuits up to 17.70, the effect of WMF was smaller (6.51). Only the radial expansion index correlated with the trough (r = 0.76), final viscosity (r = 0.79) and setback (r = 0.77) parameters. Considering the main desirable physical characteristics in savory biscuits, the highest global desirability obtained was for the proportion of 49% WWF, 24% WMF and 27% BRF.