Rongfa Zhang

Prof. Rongfa Zhang

School of Materials and Electromechanics, Jiangxi Science and Technology Normal University
orcid

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 November 2023 in Colloids and Surfaces B: Biointerfaces
Verified
Journal Article
Closed access
YLYuzhi Liu
Yuzhi Liu
CCChangtian Chen
Changtian Chen
TLTao Liang
Tao Liang
YWYaping Wang
Yaping Wang
RZRongfang Zhao
Rongfang Zhao
YZYing Zhao
Ying Zhao

27 February 2018 in Materials
Verified
Journal Article
Open access
PDF file
YWYaping Wang
Yaping Wang
LZLilan Zeng
Lilan Zeng
HZHonghua Zhang
Honghua Zhang
JXJunhuai Xiang
Junhuai Xiang
SZShufang Zhang
Shufang Zhang
YZYing Zhao
Ying Zhao
In order to clarify the mechanism that zinc and phosphorus elements entering the micro-arc oxidation (MAO) coatings developed on Ti-6Al-4V alloys, anodic coatings containing different zinc and phosphorus were fabricated using an orthogonal experiment of four factors with three levels in an electrolyte containing EDTA-ZnNa2, KOH, and phytic acid. Surface morphology, element composition, chemical state and phase structure of MAO coatings were characterized by scanning electron microscope (SEM), energy dispersive X-ray spectrometer (EDS), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). The concentrations of zinc and phosphorus in the electrolyte were analyzed by an inductively coupled plasma optical emission spectrometry (ICP-OES). The results show that zinc and phosphorus elements in MAO coatings exist in the form of Zn3(PO4)2. Phytic acid is the most important factor on both zinc and phosphorus contents of MAO coatings. With the increase of phytic acid concentration or the decrease of KOH concentration, the contents of zinc and phosphorus in MAO coatings present a similarly increasing tendency. Our results indicate that phosphorus takes part in coating formation mainly by diffusion, while zinc enters into MAO coatings with phosphorus from phytic acid.

30 September 2021 in Materials
Verified
Journal Article
Open access
PDF file
RZRongfa Zhang
Rongfa Zhang
声钟声 钟
声 钟
LZLilan Zeng
Lilan Zeng
HLHongyu Li
Hongyu Li
RZRongfang Zhao
Rongfang Zhao
YZYing Zhao
Ying Zhao
In this study, Ti-6Al-4V alloy samples were processed by micro-arc oxidation (MAO) in phytic acid (H12Phy) electrolytes with the addition of different concentrations of EDTA-MgNa2 (Na2MgY) and potassium hydroxide (KOH). The surface characterization and cytocompatibility of MAO-treated samples were evaluated systematically. H12Phy is a necessary agent for MAO coating formation, and the addition of Na2MgY and KOH into the electrolytes increases the surface roughness, micropore size and Mg contents in the coatings. The MAO coatings are primarily composed of anatase, rutile, MgO and Mg3(PO4)2. Magnesium (Mg) ions in the electrolytes enter into MAO coatings by diffusion and electromigration. The MAO coatings containing 2.97 at% Mg show excellent cell viability, adhesion, proliferation, alkaline phosphatase activity, extracellular matrix (ECM) mineralization and collagen secretion, but the cytocompatibility of the MAO coatings containing 6.82 at% Mg was the worst due to the excessively high Mg content. Our results revealed that MAO coatings with proper Mg contents improve the cytocompatibility of the Ti-6Al-4V alloys and have large potential in orthopedic applications.

19 March 2019 in Coatings
Verified
Journal Article
Open access
PDF file
YZYuanyuan Zhu
Yuanyuan Zhu
WCWenhui Chang
Wenhui Chang
SZShufang Zhang
Shufang Zhang
YSYingwei Song
Yingwei Song
HHHuade Huang
Huade Huang
YZYijia Zhang
Yijia Zhang
In this study, the synergistic effects of NH4HF2, sodium phytate (Na12Phy), K2ZrF6, and treatment time on corrosion resistance of a micro-arc oxidation (MAO) treated magnesium alloy and the entrance mechanism of P, F, and Zr into anodic coatings were investigated using an orthogonal method. In addition, the roles of NH4HF2, Na12Phy, and K2ZrF6 on coating development were separately studied. The results show that NH4HF2 and Na12Phy, the corrosion inhibitors of magnesium alloys, are beneficial but K2ZrF6 is harmful to developing anodic coatings. The corrosion resistance of MAO coatings is synergistically determined by coating characteristics, though the coating thickness plays a main role. Na12Phy significantly improves but NH4HF2 decreases the corrosion resistance of MAO coatings, while excess high K2ZrF6 is harmful to the coating corrosion resistance. Treatment time can increase the coating thickness but is the least important factor in corrosion resistance. During MAO, NH4HF2, Na12Phy, and K2ZrF6 take part in coating formation, causing P, F, and Zr to compete with each other to enter into anodic coatings.

1 July 2010 in Transactions of Nonferrous Metals Society of China
Verified
Journal Article
Closed access
SZShu-Fang Zhang
Shu-Fang Zhang
GHGuang-Hui Hu
Guang-Hui Hu
RZRongfa Zhang
Rongfa Zhang
ZJZhi-Xiang Jia
Zhi-Xiang Jia
LWLi-Jun Wang
Li-Jun Wang
XHXiang-Ming He
Xiang-Ming He

26 February 2022 in Materials Chemistry and Physics
Verified
Journal Article
Closed access
SZSheng Zhong
Sheng Zhong
GLGuoqiang Li
Guoqiang Li
SZShufang Zhang
Shufang Zhang
RZRongfang Zhao
Rongfang Zhao
XJXiongying Jiang
Xiongying Jiang
RZRongfa Zhang
Rongfa Zhang