Earth-abundant cathode materials are urgently needed to enable scaling of the Li-ion industry to multiply terawatt hours of annual production, necessitating reconsideration of how good cathode materials can be obtained. Irreversible transition metal migration and phase transformations in Li-ion cathodes are typically believed to be detrimental because they may trigger voltage hysteresis, poor kinetics and capacity degradation. Here we challenge this conventional consensus by reporting an unusual phase transformation from disordered Li- and Mn-rich rock salts to a new phase (named δ), which displays partial spinel-like ordering with short coherence length and exhibits high energy density and rate capability. Unlike other Mn-based cathodes, the δ phase exhibits almost no voltage fade upon cycling. We identify the driving force and kinetics of this in situ cathode formation and establish design guidelines for Li- and Mn-rich compositions that combine high energy density, high rate capability and good cyclability, thereby enabling Mn-based energy storage.
Developing noble metal-free electrocatalysts (NMFEs) for the oxygen evolution reaction (OER) is tremendously challenging in acid. Despite extensive research efforts, few reported NMFEs can compete with Ru/Ir oxides for acidic OERs. Here, we report a heterostructure-engineering method to break the activity–stability limit of OER electrocatalysts and yield a noble-metal-free oxide that competes with RuO2 in terms of OER specific activity and stability in acid. Via a set of correlative operando characterization techniques, heterostructured Co3O4/MnO2 suppressed the in situ reconstruction of Co3O4 and MnO2, and mitigated the electrochemical cycling-accelerated catalyst leaching, thus improving the acidic OER stability. Moreover, first-principles calculations supported that the synergy of Co and Mn in Co3O4/MnO2 lowered the theoretical OER overpotentials. The optimized Co3O4/MnO2 achieved an activity of 10 mA cm−2 at 319 ± 1.2 mV overpotential, and it demonstrated low degradation during the varying-current stability test (up to 200 mA cm−2) for 100 hours, making it among the best NMFEs for acidic OERs. Moreover, the promising performance of Co3O4/MnO2 as the anodic catalyst was also validated in a proton-conducting membrane water electrolysis cell.