Schwertmannite is an environmental mineral material that can promote the natural passivation of heavy metal elements, thereby reducing environmental pollution from toxic elements. However, the fundamental reason for the difference between the chemically (H2O2-FeSO4) and biologically (Acidithiobacillus ferrooxidans-FeSO4) synthesized schwertmannite is still unclear. In this study, X-ray diffraction, scanning electron microscopy, the Brunauer–Emmett–Teller method, and X-ray fluorescence spectrometry were used to compare the structure, specific surface area, and elemental composition of schwertmannite synthesized by biological and chemical methods. The removal capacity of As(III) by the two kinds of schwertmannite and the effects of extracellular polymeric substances (EPS) on biogenetic schwertmannite were also investigated. At a consistent Fe2+ oxidation efficiency, the chemical method synthesized more schwertmannite than the biological method over a 60-h period. The biosynthesized schwertmannite had a “chestnut shell” shape, with a larger particle size and specific surface than the chemically synthesized schwertmannite, which was relatively smooth. The saturated adsorption capacities of the biologically and chemically synthesized schwertmannite were 117.0 and 87.0 mg·g−1, respectively. After exfoliation of the EPS from A. ferrooxidans, the biosynthesized schwertmannite displayed a “wool ball” shape, with rough particle surfaces, many microporous structures, and a larger specific surface area. The schwertmannite yield also increased by about 45% compared with that before exfoliation, suggesting that the secretion of EPS by A. ferrooxidans can inhibit the formation of schwertmannite.
China is an agriculturally-producing country and the safety of its vegetables will have an extensive attention at home and abroad. Recently, contamination of soils and vegetables caused by mining activities is of great social concern because of the potential risk to human health, especially to the residents whom live near metal or metalloid mines. In this study, 18 topsoil and 141 vegetable samples were collected from the contaminated areas in Daye City Hubei Province, China and the concentrations of copper (Cu), zinc (Zn), arsenic (As), cadmium (Cd) and lead (Pb) were analyzed. A self-designed questionnaire was assigned to obtain the exposure scenario and the USEPA health risk assessment model was adopted to assess two type of risks (non-carcinogenic risks and carcinogenic risks) of vegetables to humans. The results showed that the average contents of metal(loid)s in soils exceeded the background value of Daye City. The average contents of metal(loid)s, especially As, Cd, Pb, in three kinds of vegetables were significantly higher than the permissible values based on Chinese national standard. Leafy vegetables had relatively higher concentrations and the transfer factors of As (0.015), Cd (0.080) and Pb (0.003) were comparable to leguminous and fruit vegetables. Leguminous vegetables had relatively higher concentrations and transfer factors of Cu (0.032) and Zn (0.094) than leafy and fruit vegetables. The transfer factors from soil to plants follows a decreasing order as Cd (0.068), Zn (0.047) > Cu (0.023) > As (0.006), Pb (0.002). Furthermore, health risk assessment revealed the following results: the non-carcinogenic risk decreased in the order of children, adult, adolescent, while the carcinogenic risk followed a decreasing order of adult, adolescent, children; the calculated carcinogenic and non-carcinogenic risk of the metal(loid)s by vegetable consumption decreased in the order of leafy vegetables > fruit vegetables > leguminous vegetables. The relatively lower transfer factors and lower risks may suggest that leguminous and fruit vegetables are more suitable for planting in Daye City. Based on the contributions of five kinds of metal(loid)s from three types of vegetables, Cd and As are found to be the dominant sources of health risk.
Acid mine drainage (AMD) is typically characterized by low pH, a high concentration of sulfate and dissolved heavy metals. Therefore, it is of practical significance to promote the transformation of soluble Fe and SO42− into iron hydroxysulfate minerals by biomineralization of Acidithiobacillus ferrooxidans. This enhances the lime neutralization efficiency of AMD by reducing the production of ferric hydroxide and waste gypsum. In this study, a new microbial enhanced plug-flow ditch reaction system was developed for the pretreatment of AMD on a semi-pilot scale. System stability under different hydraulic retention times (HRTs) was examined and the effects of microbe enhancement-lime neutralization technology and direct lime neutralization technology were compared. The bio-oxidation efficiency of Fe2+ (5 g L−1) reached 100% in some parts of the system when HRT was 3 and 2 days, and the time taken to reach steady state was 6 and 4 days, respectively. When the HRT was 1 day, the reaction system had operated for 4 days before the equilibrium was lost. At the optimum HRT (2 days) and after the system was stable, the average precipitation rate of total Fe was 53.62% and the average removal rate of As(III) was 17.27%. Following microbial enhanced pretreatment, the amount of lime required and waste residues generated for AMD neutralization decreased by 75.00% and 85.25%, respectively. This result supports the application of microbial enhancement-lime neutralization passive treatment technology for AMD.
It is of practical significance to promote the transformation of Fe in acid mine drainage (AMD) into ferric hydroxysulfate minerals with strong ability to remove heavy metals or metalloids. To investigate the types of biogenic ferric hydroxysulfate minerals generated in AMD by Acidithiobacillus ferrooxidans (A. ferrooxidans), different pH and K+ concentrations are tested for the formation of precipitates in media containing 160 mmol/L Fe2+. The Cr(VI) removal efficiencies of ferric hydroxysulfate minerals in AMD with different acidities are also compared. Results indicate that the mineralizing abilities of the initial pH levels (pH 3.0 > pH 2.5 > pH 2.0) and K+ concentrations (53.3 mmol/L > 3.2 mmol/L ≈ 0.8 mmol/L) differ, with cumulative Fe precipitation efficiencies of 58.7%, 58.0%, and 44.2% (K+ = 53.3 mmol/L), and 58.7%, 29.9%, and 29.6% (pH 3.0) after 96 h of A. ferrooxidans incubation, respectively. X-ray diffraction indicates that K-jarosites are formed in the treatments n(Fe)/n(K) = 0.1 and 3 at pH 2.0–3.0, while only schwertmannite is generated in a system of pH 3.0 and n(Fe)/n(K) = 200. X-ray photoelectron spectroscopy reveals that HCrO4− may be adsorbed as an inner-sphere complex on schwertmannite when the AMD pH is 3.0.