Sensors have become more versatile and sophisticated in recent years to fulfill the increasing demands for human health applications. Physiological information such as electrocardiogram, pulse rate, and respiration are essential indications of personal health, often collected as vitals, which are typically collected from medical‐grade electrocardiogram (ECG) machines. In‐textile sensors are a fast‐growing sub‐category of wearable sensors embedded in smart textiles to acquire physiological information and movement index and provide harmful chemical warnings without compromising the comfortable nature of clothing. Recent literature has shown that integrating new materials has greatly improved the stability, specificity, and selectivity of in‐textile sensors. For example, polyvinylidene fluoride nanofiber produced a highly stretchable sensor to measure ECG readings during movement without losing data quality. This review discusses a group of nanomaterial‐based in‐textile sensors for consumer use in the home, workplace, and healthcare environments. This review will focus on exploring and analyzing the latest developments in these nanomaterial‐based e‐textiles due to their ability to be more easily integrated for daily use and their great potential for medical applications. Future work will be necessary to incorporate recycled materials, improve the method of powering these sensors, and ultimately refine the designs to be appropriate for more sustainable use.
18 May 2020 in Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine
The recent advancement of motion tracking technology offers better treatment tools for conditions, such as movement disorders, as the outcome of the rehabilitation could be quantitatively defined. The accurate and fast angular information output of the inertial measurement unit tracking systems enables the collection of accurate kinematic data for clinical assessment. This article presents a study of a low-cost microelectromechanical system inertial measurement unit-based tracking system in comparison with the conventional optical tracking system. The system consists of seven microelectromechanical system inertial measurement units, which could be mounted on the lower limbs of the subjects. For the feasibility test, 10 human participants were instructed to perform three different motions: walking, running, and fencing lunges when wearing specially designed sleeves. The subjects’ lower body movements were tracked using our inertial measurement unit-based system and compared with the gold standard—the NDI Polaris Vega optical tracking system. The results of the angular comparison between the inertial measurement unit and the NDI Polaris Vega optical tracking system were as follows: the average cross-correlation value was 0.85, the mean difference of joint angles was 2.00°, and the standard deviation of joint angles was ± 2.65°. The developed microelectromechanical system–based tracking system provides an alternative low-cost solution to track joint movement. Moreover, it is able to operate on an Android platform and could potentially be used to assist outdoor or home-based rehabilitation.
With fever being one of the most prominent symptoms of COVID-19, the implementation of fever screening has become commonplace around the world to help mitigate the spread of the virus. Non-contact methods of temperature screening, such as infrared (IR) forehead thermometers and thermal cameras, benefit by minimizing infection risk. However, the IR temperature measurements may not be reliably correlated with actual core body temperatures. This study proposed a trained model prediction using IR-measured facial feature temperatures to predict core body temperatures comparable to an FDA-approved product. The reference core body temperatures were measured by a commercially available temperature monitoring system. Optimal inputs and training models were selected by the correlation between predicted and reference core body temperature. Five regression models were tested during the study. The linear regression model showed the lowest minimum-root-mean-square error (RSME) compared with reference temperatures. The temple and nose region of interest (ROI) were identified as optimal inputs. This study suggests that IR temperature data could provide comparatively accurate core body temperature prediction for rapid mass screening of potential COVID cases using the linear regression model. Using linear regression modeling, the non-contact temperature measurement could be comparable to the SpotOn system with a mean SD of ± 0.285 °C and MAE of 0.240 °C.
28 November 2018 in Annals of Biomedical Engineering
Background: During COVID-19, clinical and health care demands have been on the rapid rise. Major challenges that have arisen during the pandemic have included a lack of testing kits, shortages of ventilators to treat severe cases of COVID-19, and insufficient accessibility to personal protective equipment for both hospitals and the public. New technologies have been developed by scientists, researchers, and companies in response to these demands. Objective: The primary objective of this review is to compare different supporting technologies in the subjugation of the COVID-19 spread. Methods: In this paper, 150 news articles and scientific reports on COVID-19–related innovations during 2020-2021 were checked, screened, and shortlisted to yield a total of 23 articles for review. The keywords “COVID-19 technology,” “COVID-19 invention,” and “COVID-19 equipment” were used in a Google search to generate related news articles and scientific reports. The search was performed on February 1, 2021. These were then categorized into three sections, which are personal protective equipment (PPE), testing methods, and medical treatments. Each study was analyzed for its engineering characteristics and potential social impact on the COVID-19 pandemic. Results: A total of 9 articles were selected for review concerning PPE. In general, the design and fabrication of PPE were moving toward the direction of additive manufacturing and intelligent information feedback while being eco-friendly. Moreover, 8 articles were selected for reviewing testing methods within the two main categories of molecular and antigen tests. All the inventions endeavored to increase sensitivity while reducing the turnaround time. However, the inventions reported in this review paper were not sufficiently tested for their safety and efficiency. Most of the inventions are temporary solutions intended to be used only during shortages of medical resources. Finally, 6 articles were selected for the review of COVID-19 medical treatment. The major challenge identified was the uncertainty in applying novel ideas to speed up the production of ventilators. Conclusions: The technologies developed during the COVID-19 pandemic were considered for review. In order to better respond to future pandemics, national reserves of critical medical supplies should be increased to improve preparation. This pandemic has also highlighted the need for the automation and optimization of medical manufacturing.
5 January 2018 in Annals of Biomedical Engineering