Ride comfort, stability, and safety are the key criteria for evaluating the quality of vehicles, especially for the electric vehicle (EV) as the global automotive industry shifts toward sustainable and green transportation. Achieving these criteria heavily depends on the suspension system. To address this, the study establishes a comprehensive model that includes an eight-degrees-of-freedom (8-DOF) model and a steering model under the effects of random road excitations and driving conditions. The mathematical equations governing the vehicle's motion are formulated based on Newton's laws, while the nonlinear Pacejka's Magic Tire Formula is applied to represent tire behavior accurately. A Fuzzy Fractional-Order Proportional-Integral-Derivative (FFOPID) controller is then proposed for the EV's active suspension system (ASS) to enhance ride comfort, stability, and safety. In addition, the classical Proportional-Integral-Derivative (PID) controller and the fuzzy logic controller (FLC) are also implemented to serve as a baseline for evaluating the performance of the proposed FFOPID controller. A fishhook maneuver is incorporated into the study to evaluate vehicle performance in critical handling scenarios. To enhance the effectiveness of the control strategy, the Particle Swarm Optimization (PSO) algorithm is employed to optimize the controller parameters. Finally, the mathematical equations and proposed control strategies for the ASS are implemented in the Simulink environment of MATLAB. The root mean square (RMS) values of the acceleration of the human-seat system (
a
zhs ), vertical vehicle body (
a
zb ), pitch vehicle body (
a
ϕb ), roll vehicle body (
a
θb ), suspension working space ( SWS ), and dynamic tire load ( DT L) are selected as performance evaluation indices for the proposed control strategy. The results show that the proposed FFOPID not only outperforms the passive suspension system (PSS) but also proves to be more effective than the PID and FLC controllers in enhancing ride comfort, stability, and safety under severe operating conditions, which underscores the effectiveness of the proposed FFOPID controller in enhancing the overall quality of EVs.
In the process of driving, the steering, braking, and driving conditions and different road conditions affect the vibration characteristics of the vehicle in the vertical, roll, and pitch directions. These factors greatly impact the riding comfort of the vehicle. Among them, the uneven distribution of vertical load between the left and right or the front and rear suspension is one of the important factors affecting the performance indicators of the vehicle’s roll angle acceleration and pitch angle acceleration. In order to improve the ride comfort of the vehicle in vertical, roll, and pitch motion, the inerter is introduced in this paper to form a new type of suspension structure with the “spring-damping” base element, inertial suspension. It breaks away from the traditional “spring-damping” base element of the inherent suspension structure. In this paper, the mechatronic inerter is taken as the actual controlled object, and the inertial suspension structure is considered as the controlled model based on the dynamic surface control theory and the pseudo-inverse matrix principle. Thus, the coordinated control of the inertial suspension can be achieved. Under random road input, compared with passive suspension, the ride comfort performance indicators of the vehicle with inertial suspension based on dynamic surface control are significantly improved. Finally, a Hardware-in-the-Loop (HiL) test of the controller based on dynamic surface control is carried out to verify that the performance of the vehicle inertial suspension using the dynamic surface control algorithm had improved in terms of vehicle ride comfort. The error between the experimental results and the simulation results is about 8%, which verifies the real-time performance and effectiveness of the dynamic surface controller in the real controller.
10 February 2025 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Reducing vibrations for the hub motor driven vehicle (HMDV) under the adverse effects of the unbalanced radial force of the switched reluctance motor (SRM) and road surface excitation is essential to enhance the overall performance of electric vehicles. To address this issue, a quarter dynamic model of the HMDV is established. Subsequently, four structures of the inertial suspension system are proposed to improve vibration isolation for the HMDV. To achieve this, the Particle Swarm Optimization (PSO) algorithm is employed to optimize the parameters of the inertial suspension system. The root mean square (RMS) values of body acceleration, suspension working space, and dynamic tire load are chosen as the objective functions. Finally, two representative structures of the inertial suspension system are selected and developed into semi-active inertial suspension systems to further enhance vibration isolation performance for the HMDV. Fuzzy logic control (FLC) is then applied to control the damping coefficient of the semi-active inertial suspension system. To improve the effectiveness of the FLC, the PSO algorithm is used to optimize the input and output ranges of the FLC. The performance of the semi-active inertial suspension system is thoroughly evaluated in both the time and frequency domains. The results show that the semi-active inertial suspension system significantly improves ride comfort, driving safety, and road friendliness compared to the conventional suspension system. These findings underscore the potential of semi-active inertial suspension systems to significantly enhance vibration isolation for the HMDV.