This study focuses on the synthesis of silver nanoparticles (AgNPs) at different high concentrations and investigates their physicochemical properties, antimicrobial activity, and cytotoxicity. AgNPs were synthesized using the alcohol reduction process, involving the reduction of AgNO3 and its subsequent stabilization via PVP at 80 °C for 4 h. The AgNO3/PVP molar ratio and the average molecular weight were modified in this study. Characterization analyses revealed that the synthesized AgNPs exhibited characteristic surface plasmon resonance absorption peaks at approximately 415 nm, as observed in the UV–Vis spectrum. The results presented in X-ray diffractograms confirmed the face-centered cubic structure of metallic Ag in the nanoparticles. The nanoparticles demonstrated uniform size and shape, with controllable dimensions ranging from 3 to 800 nm. Regarding antimicrobial activity, the MIC solutions exhibited higher potency against the planktonic cells of Candida albicans. The determination of inhibition halos indicated that the silver nanoparticles had an impact on the microorganisms Streptococcus mutans, Candida albicans, and Actinomyces israelii. Furthermore, lower-concentration compositions showed reduced cytotoxic effects compared to higher-concentration particles. Based on the findings, it was concluded that the AgNO3/PVP molar ratio plays a crucial role in the production of AgNPs. These synthesized nanoparticles exhibit desirable physicochemical properties and demonstrate potential antimicrobial activity and controlled cytotoxicity.
Environmental problems related to the generation of wastewater contaminated with organic compounds and the emissions of pollutants from fuel burning have become major global problems. Thus, there is a need for the development of alternative and economically viable technologies for the remediation of the affected ecosystems. Therefore, this work describes the preparation and characterization of a Ti(OH)4 catalyst with the modified surface for application in the photodegradation of organic compounds (methylene blue (MB) dye and the drug amiloride (AML)) and in the artificial photosynthesis process. Characterization results reveal that peroxo groups on the surface of the catalyst had a great influence on the optical properties of the Ti(OH)4 and consequently in its photocatalytic property. This catalyst showed a high photocatalytic activity for the degradation of organic pollutants under visible radiation, reaching approximately 98% removal of both the dye and the drug in 150 min of reaction. In addition, the catalyst presented a great potential for the reduction of CO2 under ultraviolet (UV) radiation when compared to P25, which is a classic catalyst used in photocatalytic processes. The highest photocatalytic activity can be attributed to the strong visible light absorption, due to the narrow band gap, and the effective separation of photogenerated electron-hole pairs caused by the peroxo groups on the Ti(OH)4 surface.