A waterhammer model was proposed to simulate a transient event with cavitation in a simple pipeline system. The governing equations for a quasi-two-dimensional model were solved through a hybrid scheme of the method of characteristics and the finite difference method considering the relationship between pressure head reduction and cavitation. An alternative method to address the boundary condition for the two-dimensional model was proposed, which improved the stability of the existing approaches. The comparison of longitudinal and radial velocity profiles between the proposed and existing models exhibited significant differences, which can be explained by the sequential generation and collapse of the cavity. The time series of the pressure head obtained through experimental transient events with vapour cavitation showed good agreement with that of the proposed model. The investigation of energy under a waterhammer showed that the pattern of transition between internal energy and kinetic energy is also substantially affected by the fate of cavitation during transient events.
27 August 2018 in Journal of Pressure Vessel Technology
A direct spring loaded pressure relief valve (DSLPRV) is an efficient hydraulic structure used to control a potential water hammer in pipeline systems. The optimization of a DSLPRV was explored to consider the instability issue of a valve disk and the surge control for a pipeline system. A surge analysis scheme, named the method of characteristics, was implemented into a multiple-objective genetic algorithm to determine the adjustable factors in the operation of the DSLPRV. The forward transient analysis and multi-objective optimization of adjustable factors, such as the spring constant, degree of precompression, and disk mass, showed substantial relaxation in the surge pressure and oscillation of valve disk in a hypothetical pipeline system. The results of the regression analysis of surge were compared with the optimization results to demonstrate the potential of the developed method to substantially reduce computational costs.
12 June 2024 in AQUA — Water Infrastructure, Ecosystems and Society
This study investigates rapid dynamic pressure variations in water distribution networks due to critical incidents such as pipe bursts and valve operations. We developed and implemented a machine learning (ML)-based methodology that surpasses traditional slow cycles of pressure data acquisition, facilitating the efficient capture of transient phenomena. Employing the Orion ML library, which features advanced algorithms including long short-term memory dynamic threshold, autoencoder with regression, and time series anomaly detection using generative adversarial networks, we engineered a system that dynamically adjusts data acquisition frequencies to enhance the detection and analysis of anomalies indicative of system failures. The system's performance was extensively tested using a pilot-scale water distribution network across diverse operational conditions, yielding significant enhancements in detecting leaks, blockages, and other anomalies. The effectiveness of this approach was further confirmed in real-world settings, demonstrating its operational feasibility and potential for integration into existing water distribution infrastructures. By optimizing data acquisition based on learned data patterns and detected anomalies, our approach introduces a novel solution to the conventionally resource-intensive practice of high-frequency monitoring. This study underscores the critical role of advanced ML techniques in water network management and explores future possibilities for adaptive monitoring systems across various infrastructural applications.
11 February 2021 in Journal of Pressure Vessel Technology
An air vessel is a simple and effective device for protecting a pipeline system from abnormal pressure events. In order to design and select a suitable air vessel, analysis of the pipeline system is necessary. A quasi-2D approach can overcome some of the limitations of the conventional one-dimensional transient flow analysis method. However, only a few hydraulic components can be implemented in the quasi-2D approach. In this study, we propose a methodology for applying an air vessel in the quasi-2D model. An experimental study is performed for validating the proposed model. Although an identical approach involving an accumulator model is used to model the air vessel as in the 1D model, the quasi-2D model shows improved performance for the experimental system.
1 May 2024 in AQUA — Water Infrastructure, Ecosystems and Society
This study introduces an innovative diagnostic approach for identifying gate-valve failures in water distribution systems. By implementing high-frequency pressure sensors upstream and downstream of the gate valves, we obtained detailed pressure data that are pivotal for fault diagnosis. We explored three distinct machine-learning algorithms and two data-handling techniques to ensure optimal performance in real-world applications. In our methodology, supervised learning algorithms are used to analyze pressure differentials and predict valve behavior. We rigorously tested these algorithms using both raw and feature-engineered data, and the results indicated the effectiveness of the Gaussian-naïve Bayes model with six extracted features. This approach enhances the precision and reliability of diagnostics in water distribution networks.
Quasi-two-dimensional (2D) modeling of unsteady flow is important for the accurate prediction of flow and pressure in pipeline systems. In this study, a generalized method is developed to consider various inline components such as junctions and inline valves for quasi-2D method of characteristic (MOC). The occurrence of vaporous cavitation is incorporated into the developed scheme under transient conditions. To address the discharge and pressure profile at the generalized component, a procedure is proposed to obtain the convergence satisfying the characteristic equations and hydraulic structure function. The validity of the developed method is tested for two different pipeline systems. Good agreements of transient pressure between simulations and experimental results are obtained, thus demonstrating the predictability of the developed method for junctions and inline valves with vaporous cavitation.