A geomagnetic field is a vector field in which the strength and direction are related to geographical location. Geomagnetic navigation technology, which uses collected geomagnetic field information to achieve positioning and navigation, has the advantages of reliability, stability, accuracy, and concealment. With the deepening research on geomagnetic navigation, bioinspired geomagnetic navigation technology has also been developed, which mainly studies and imitates the magnetic sensing mechanism and navigation behavior of animals, providing new research ideas for geomagnetic navigation technology. The magnetic particle hypothesis and free radical pair hypothesis are two mainstream mechanisms of biological sensing using the geomagnetic field, and studies have shown that these two mechanisms may be coupled within organisms. In this study, we propose a bioinspired weak magnetic vector (BWMV) sensor based on the joint sensing mechanism of magnetic particles and free radicals. It consists of a magnetic rod made of soft magnetic material and a tunnel magnetoresistance (TMR) sensor array. A magnetic rod was used to simulate magnetic particles to convert magnetic field angle information into magnetic field intensity distribution information, and the TMR sensor array was used to simulate the perception of the magnetic field distribution by free radicals. In addition, artificial neural networks (ANNs) were used for BWMV sensors to obtain the mapping relationship between the magnetic field distribution and parameters, which can be used for geomagnetic navigation. To verify the navigation effect of the BWMV sensor in the laboratory, a simulated geomagnetic navigation device was built, and the high-precision mapping relationship from geomagnetic parameters to latitude and longitude information of the selected navigation area was obtained through another ANN. Finally, the effectiveness of the BWMV sensor based on ANNs for geomagnetic navigation is verified using simulated navigation experiments.
For geomagnetic navigation technology, taking inspiration from nature and leveraging the principle of animals’ utilization of the geomagnetic field for long-distance navigation, and employing biomimetic technology to develop higher-precision geomagnetic sensors and more advanced navigation strategies, has emerged as a new trend. Based on the two widely acknowledged biological magnetic induction mechanisms, we have designed a bioinspired weak magnetic vector (BWMV) sensor and integrated it with neural networks to achieve geomagnetic matching navigation. In this paper, we assess the performance of the BWMV sensor through finite element model simulation. The result validates its high measurement accuracy and outstanding adaptability to installation errors with the assistance of specially trained neural networks. Furthermore, we have enhanced the bioinspired geomagnetic navigation algorithm and proposed a more advanced search strategy to adapt to navigation under the condition of no prior geomagnetic map. A simulated geomagnetic navigation platform was constructed based on the finite element model to simulate the navigation of the BWMV sensor in geomagnetic environments. The simulated navigation experiment verified that the proposed search strategy applied to the BWMV sensor can achieve high-precision navigation. This study proposes a novel approach for the research of bioinspired geomagnetic navigation technology, which holds great development prospects.
26 June 2023 in IEEE Transactions on Instrumentation and Measurement
A correct understanding of the magnetic properties of rocks is essential to obtain reliable records of paleomagnetism and environmental magnetism. However, the original orientation of cores can be easily lost during drilling, which represents the main source of error when measuring the magnetic properties of rocks. In this study, we develop an in situ detection system to obtain isothermal remanent magnetization (IRM) acquisition curves and alternating field demagnetization (AFD) remanence curves of rocks. This system eliminates the need to collect cores and allows the rock to be magnetized, demagnetized, and measured in situ. This system uses a magnetic field generator to generate pulsed magnetic fields and alternating magnetic fields for in situ magnetization and demagnetization of rocks. The remanence data are collected using an anisotropic magnetoresistance magnetometer. To achieve remote control and real-time data transmission, the system’s corresponding host computer software is also configured. The system has high magnetization (0–1T, 8ms) and demagnetization (0–300mT, 62.5Hz) capabilities; additionally, the linearity and stability of the magnetometer are almost unaffected by strong magnetic fields. In this paper, the remanence inversion formula for the in situ detection system is given. When the rock is measured in situ and close to the bottom of the coil, the z-component of the flux density measured by the magnetometer can be used to calculate the rock’s remanence based on the inversion formula. Three cylindrical rock samples of the same material and different sizes were tested using the in situ detection system, and their corresponding IRM B and AFD B curves were obtained. The B rc and saturation IRM parameters of the samples obtained by inversion are essentially the same as those measured using a vibration sample magnetometer. This system provides a new measurement method for the detection of remanence of rocks in the field and provides a strong foundation for future development of in situ measurement technology for the magnetic properties of seafloor rocks and sediments.
26 August 2025 in IEEE Transactions on Instrumentation and Measurement
Marine geomagnetic survey plays a pivotal role in the study of submarine tectonics, but existing technology lacks the ability to acquire the magnetic mineral composition of marine bottom sediments, which is crucial for the accurate analysis and interpretation of magnetic anomalies. To address this problem, we have developed an Ocean Floor Magnetic Property Measurement System (OFMPMS), which is capable of in situ measurement of isothermal remanent magnetization (IRM) acquisition curves and alternating field demagnetization (AFD) curves in deep-sea environments. The subsea unit of the OFMPMS consists of three modules: a magnetic field generator, a system controller, and a measuring unit, all of which are enclosed in three sealed cabins to withstand the high-pressure environment of the deep sea. The OFMPMS is equipped with five anisotropic magnetoresistance magnetometers, enabling it to effectively detect the magnetic inhomogeneity of samples. Two sea trials were completed in the South China Sea. During the first sea trial, the OFMPMS performed in situ detection of marine bottom sediments at a depth of 1,385 meters. However, no valuable IRM and AFD data were obtained because the sediments in this area were predominantly paramagnetic. During the second sea trial, at a depth of 4,500 meters, an iron ore sample was subjected to testing. The test results showed that in situ data matched laboratory data under high applied fields but differed significantly under low applied fields, which was attributed to the pressure exerted by seawater on the sample. This discovery highlights the limitations of ex situ measurement methods (measurements taken at normal pressure on land) for analyzing marine bottom sediment magnetic properties. OFMPMS provides an approach for in situ identification of magnetic minerals in marine bottom sediments and is expected to provide an accurate interpretation of submarine magnetic anomalies.