Produced water is the largest byproduct of oil and gas production. Due to the complexity of produced water, especially dissolved petroleum hydrocarbons and high salinity, efficient water treatment technologies are required prior to beneficial use of such waste streams. Photocatalysis has been demonstrated to be effective at degrading recalcitrant organic contaminants, however, there is limited understanding about its application to treating produced water that has a complex and highly variable water composition. Therefore, the determination of the appropriate photocatalysis technique and the operating parameters are critical to achieve the maximum removal of recalcitrant compounds at the lowest cost. The objective of this review is to examine the feasibility of photocatalysis-involved treatment for the removal of contaminants in produced water. Recent studies revealed that photocatalysis was effective at decomposing recalcitrant organic compounds but not for mineralization. The factors affecting decontamination and strategies to improve photocatalysis efficiency are discussed. Further, recent developments and future research prospects on photocatalysis-derived systems for produced water treatment are addressed. Photocatalysis is proposed to be combined with other treatment processes, such as biological treatments, to partially reduce total organic carbon, break down macromolecular organic compounds, increase biodegradability, and reduce the toxicity of produced water.

Produced water is the largest waste stream associated with oil and gas production. It has a complex matrix composed of native constituents from geologic formation, chemical additives from fracturing fluids, and ubiquitous bacteria. Characterization of produced water is critical to monitor field operation, control processes, evaluate appropriate management practices and treatment effectiveness, and assess potential risks to public health and environment during the use of treated water. There is a limited understanding of produced water composition due to the inherent complexity and lack of reliable and standardized analytical methods. A comprehensive description of current analytical techniques for produced water characterization, including both standard and research methods, is discussed in this review. Multi-tiered analytical procedures are proposed, including field sampling; sample preservation; pretreatment techniques; basic water quality measurements; organic, inorganic, and radioactive materials analysis; and biological characterization. The challenges, knowledge gaps, and research needs for developing advanced analytical methods for produced water characterization, including target and nontarget analyses of unknown chemicals, are discussed.

This study investigated the effects of an electromagnetic field (EMF) on control of membrane fouling and scaling during desalination of brackish groundwater using a pilot reverse osmosis (RO) skid. The groundwater was primarily CaSO₄ type with a total dissolved solids concentration of 5850 mg/L and hardness of 2500 mg/L as CaCO₃. Two EMF devices were installed in the pipeline before a cartridge filter and in the RO feed inlet to induce an electric signal of ±150 kHz to the groundwater. The effects of EMF on membrane scaling were evaluated under accelerated conditions, i.e., without pH adjustment and addition of antiscalant. Two-phase experiments were conducted: Phase 1 (376 h) with the EMF devices turned on after 150 h baseline operation; and Phase 2 (753 h) with the EMF devices turned on from the beginning of testing. The EMF significantly reduced membrane scaling and improved RO performance by 38.3% and 14.3% in terms of normalized water permeability decline rate after 150 h and 370 h operation, respectively. Membrane autopsy results indicated that the fouling layer formed under the influence of EMF was loose with a low density and was easily removed by hydraulic flushing.

The rapid development of unconventional oil and gas (O&G) extraction around the world produces a significant amount of wastewater that requires appropriate management and disposal. Produced water (PW) is primarily disposed of through saltwater disposal wells, and other reuse/disposal methods include using PW for hydraulic fracturing, enhanced oil recovery, well drilling, evaporation ponds or seepage pits within the O&G field, and transferring PW offsite for management or reuse. Currently, 1–2% of PW in the U.S. is used outside the O&G field after treatment. With the considerable interest in PW reuse to reduce environmental implications and alleviate regional water scarcity, it is imperative to analyze the current regulatory framework for PW management and reuse. In the U.S., PW is subject to a complex set of federal, state, and sometimes local regulations to address the wide range of PW management, construction, and operation practices. Under the supervision of the U.S. Environment Protection Agency (U.S. EPA), different states have their own regulatory agencies and requirements based on state-specific practices and laws. This study analyzed the regulatory framework in major O&G-producing regions surrounding the management of PW, including relevant laws and jurisdictional illustrations of water rules and responsibilities, water quality standards, and PW disposal and current/potential beneficial reuse up to early 2022. The selected eastern states (based on the 98th meridian designated by the U.S. EPA as a tool to separate discharge permitting) include the Appalachian Basin (Marcellus and Utica shale areas of Pennsylvania, Ohio, and West Virginia), Oklahoma, and Texas; and the western states include California, Colorado, New Mexico, and Wyoming. These regions represent different regulations; climates; water quantities; quality diversities; and geologic, geographic, and hydrologic conditions. This review is particularly focused on the water quality standards, reuse practices and scenarios, risks assessment, knowledge gaps, and research needs for the potential reuse of treated PW outside of O&G fields. Given the complexity surrounding PW regulations and rules, this study is intended as preliminary guidance for PW management, and for identifying the knowledge gaps and research needs to reduce the potential impacts of treated PW reuse on the environment and public health. The regulations and experiences learned from these case studies would significantly benefit other states and countries with O&G sources for the protection of their environment and public health.