Seeding –OH groups on substrates via an H2O2/UV bath helps to homogenize and cure SAM adsorption for scalable fabrication of perovskite solar cells with impressive efficiency and stability.
Substantial VOC loss and halide segregation in wide-bandgap (WBG) perovskite sub-cells pose significant challenges to the advancement of all-perovskite tandem solar cells (APTSCs). One of the most impactful developments addressing this issue is the application of hole-selective self-assembled monolayers (SAMs), which has led to significant progress in APTSC technology. However, SAMs with poor resistance to polar solvents are inevitably delaminated from substrates during perovskite precursor coating, presenting a major challenge in achieving complete SAM coverage. This leads to derivatization issues, such as defective perovskite formation and considerable interfacial energy loss. Here, we introduced an in situ molecular compensation strategy to address the inherent limitation of SAMs in WBG perovskites by incorporating 5-ammonium valeric acid iodide (5-AVAI). The high-dipole 5-AVAI spontaneously accumulated at the buried interface to compensate for SAM-deficient sites during WBG perovskite deposition, effectively minimizing interfacial energy loss. Simultaneously, the amphoteric 5-AVAI, containing both amino and carboxyl groups, could compensate defects at grain boundaries for solid passivation. Consequently, a champion efficiency of 20.23% with a record VOC of 1.376 V was achieved in WBG devices, enabling an overall efficiency of 28.9% for the APTSCs. Encouragingly, the tandem devices showed good operational stability, retaining 87.3% of their initial efficiency after 800 h of continuous tracking.
17 November 2025 in Angewandte Chemie International Edition
Perovskite solar cells tend to degrade much faster under day-night cycling conditions. One key reason lies in the periodic strain in perovskite film under cycling mode due to its soft crystal lattice nature. Here, we propose a dynamic reversible crosslinking strategy by introducing disulfide-mediated cross-linkable additive of 2-methacryloyloxyethyl-thioctate. Combining with carbon-carbon double bond, 2-methacryloyloxyethyl-thioctate crosslinks at grain boundaries at high temperature through disulfide bond ring-opening, inhibiting perovskite expansion under day conditions. While at room temperature, 2-methacryloyloxyethyl-thioctate de-crosslinks with inverse ring-closing reaction, promoting perovskite recovery under night conditions. As a result, periodic film strain is alleviated in PSCs during day-night cycling aging. Resulting devices show high efficiency of 26.5% with good cycling stability, retaining 95.7% of initial efficiency after MPP tracking for 1,800 h under day-night cycling mode.