The response of large temporary working platforms for cross-sea bridges under the action of strong wind and waves with large tidal ranges is one of the key issues in offshore engineering. Based on a grand offshore bridge project in Fujian Province of China, on-site monitoring tests were carried out on a temporary working platform. A high-precision and fully automatic monitoring system was adopted to conduct the all-weather and high-frequency monitoring on vibrations, responses, and sea conditions of the platform, enabling us to grasp its structural mechanical characteristic and ensuring the platform safety. The results show that, under the severe sea conditions of typhoons, the stress of the platform structure increases significantly with the increase in the tidal range and reaches its maximum value at the high tide level. The inclination angle changes violently at the high tide level, while the amplitude of inclination angle change is relatively small at the low tide level. The effective value of the platform displacement under the severe sea conditions of typhoon meteorology is much larger than that under normal sea conditions. Compared with the low tide level, the acceleration of the offshore temporary work platform changes more drastically at the high tide level under severe sea conditions. Under severe sea conditions, the tidal level has a significant impact on the frequency corresponding to the peak value of the acceleration power spectrum of the offshore temporary platform.
The compactness of concrete vibration in precast box beams is a critical determinant of structural durability. Traditional manufacturing processes, however, rely heavily on manual experience and lack precise positioning and quantitative standards, frequently leading to defects such as missed vibration and under-vibration. Achieving precise positioning of vibrating rods presents a significant technical challenge in indoor precasting environments characterized by GNSS-denied conditions, dense reinforcement, and dust occlusion. To address these issues, this study proposes and validates a high-precision positioning and dynamic identification system for vibrating equipment based on multi-modal sensor fusion. This system effectively resolves the challenges of field-of-view coverage and dynamic occlusion across a standard 30-meter precasting pedestal. At the algorithmic level, a two-layer coordinate transformation framework comprising offline calibration and online correction is established. Simultaneously, the YOLOv13 deep learning network is employed for real-time object detection. By integrating point cloud filtering and plane fitting techniques, the system calculates the three-dimensional coordinates and spatial pose of the vibrating rod within the box beam coordinate system. Experimental results demonstrate the system's exceptional robustness in complex, real-world beam plant environments. The dynamic tracking refresh rate exceeds 10 Hz, with both static and dynamic positioning errors maintained within the centimeter-level range. This research holds significant theoretical importance and engineering application value for promoting the intelligent transformation of precast beam production.
22 September 2026 in Machine Vision and Applications
To address the issues of vibration blind spots and the “black box” of quality control in the vibration process of precast beams caused by dense reinforcement zones and the arbitrariness of manual operation, this paper proposes the development of a closed-loop intelligent vibration system. This system integrates intelligent equipment, evaluation models, adaptive algorithms, and digital twin feedback control. By combining drum-type vibration robots for large-scale operations with wearable sensing devices for complex dead corners, full coverage of the operation area is achieved. Second, based on the coupling mechanism of mechanical-electrical-hydraulic multi-physics fields, a quantitative evaluation model for vibration compactness is established. Furthermore, a hierarchical adaptive control strategy based on feedback of the rheological state is designed. By fusing real-time positioning data with vibration energy indices, process parameters such as vibration frequency and duration are dynamically optimized. Finally, through the developed digital twin feedback control platform, a vibration energy cloud map reflecting the internal quality can be generated in real time, thereby achieving process visualization and early warning of defects. Results show that the system can accurately detect and resolve missed and insufficient vibration issues. Construction activities are thus managed via data rather than subjective empirical judgment.