Thermal recovery technology is generally suitable for shallow lays due to the higher thermal loss for the deep heavy-oil reservoirs. Non-thermal recovery technologies, such as the non-condensate gas injection technology, are not limited by the reservoir depth and could be extensively applied for the heavy-oil reservoir. Many experimental studies and field applications of non-condensate gas injection have been conducted in heavy-oil reservoirs. The injected non-condensate gas could achieve dynamic miscibility with heavy oil through multiple contacts, which has a significant viscosity-reduction effect under the reservoir conditions. In addition, the equipment involved in the gas injection operation is simple. There are many kinds of non-condensate gases, and common types of gases include N₂ and CO₂ due to abundant gas sources and lower prices. Moreover, CO₂ is a greenhouse gas and the injection of CO₂ into the reservoir would have environmental benefits. The non-thermodynamic method is to inject N₂ and CO₂ separately to produce heavy oil based on the mechanism of the volume expansion of crude oil to form elastic flooding and reduce crude oil viscosity and foamy oil flow. Steam injection recovery of the thermodynamics method has the disadvantages of large wellbore heat loss and inter-well steam channeling. The addition of N₂, CO₂, and other non-condensate gases to the steam could greatly improve the thermophysical properties of the injected fluid, and lead to higher expansion performance. After being injected into the reservoir, the viscosity of heavy oil could be effectively reduced, the seepage characteristics of heavy oil would be improved, and the reservoir development effect could be improved. Non-condensate gas injection stimulation technology can not only effectively improve oil recovery, but also help to achieve carbon neutrality, which has a very broad application prospect in the future oil recovery, energy utilization, environmental improvement, and other aspects.

In the Pikes Peak oil field near Lloydminster, Canada, a significant amount of heavy oil reserves is located in reservoirs with a bottom water zone. The properties of the bottom water zone and the operation parameters significantly affect oil production performance via the steam-assisted gravity drainage (SAGD) process. Thus, in order to develop this type of heavy oil resource, a full understanding of the effects of these properties is necessary. In this study, the numerical simulation approach was applied to study the effects of properties in the bottom water zone in the SAGD process, such as the initial gas oil ratio, the thickness of the reservoir, and oil saturation of the bottom water zone. In addition, some operation parameters were studied including the injection pressure, the SAGD well pair location, and five different well patterns: (1) two corner wells, (2) triple wells, (3) downhole water sink well, (4) vertical injectors with a horizontal producer, and (5) fishbone well. The numerical simulation results suggest that the properties of the bottom water zone affect production performance extremely. First, both positive and negative effects were observed when solution gas exists in the heavy oil. Second, a logarithmical relationship was investigated between the bottom water production ratio and the thickness of the bottom water zone. Third, a non-linear relation was obtained between the oil recovery factor and oil saturation in the bottom water zone, and a peak oil recovery was achieved at the oil saturation rate of 30% in the bottom water zone. Furthermore, the operation parameters affected the heavy oil production performance. Comparison of the well patterns showed that the two corner wells and the triple wells patterns obtained the highest oil recovery factors of 74.71% and 77.19%, respectively, which are almost twice the oil recovery factors gained in the conventional SAGD process (47.84%). This indicates that the optimized SAGD process with the two corner wells and the triple wells pattern is able to improve SAGD production performance in a heavy oil reservoir with a bottom water zone.