The comprehensive properties of high-entropy alloys (HEAs) are highly-dependent on their phases. Although a large number of machine learning (ML) algorithms has been successfully applied to the phase prediction of HEAs, the accuracies among different ML algorithms based on the same dataset vary significantly. Therefore, selection of an efficient ML algorithm would significantly reduce the number and cost of the experiments. In this work, phase prediction of HEAs (PPH) is proposed by integrating criterion and machine learning recommendation method (MLRM). First, a meta-knowledge table based on characteristics of HEAs and performance of candidate algorithms is established, and meta-learning based on the meta-knowledge table is adopted to recommend an algorithm with desirable accuracy. Secondly, an MLRM based on improved meta-learning is engineered to recommend a more desirable algorithm for phase prediction. Finally, considering poor interpretability and generalization of single ML algorithms, a PPH combining the advantages of MLRM and criterion is proposed to improve the accuracy of phase prediction. The PPH is validated by 902 samples from 12 datasets, including 405 quinary HEAs, 359 senary HEAs, and 138 septenary HEAs. The experimental results shows that the PPH achieves performance than the traditional meta-learning method. The average prediction accuracy of PPH in all, quinary, senary, and septenary HEAs is 91.6%, 94.3%, 93.1%, and 95.8%, respectively.
The strip floating height is a key factor affecting production efficiency and quality of the air cushion furnace. At present, the air cushion furnace with hybrid nozzles is the most typical heating and drying equipment. In order to predict the floating height of the strip in this equipment, a hard-division and multi-model based floating height prediction method is proposed. In hard division method, the process is divided into several stable and vibration stages. On the one hand, time interval based novel density clustering algorithm is proposed so as to avoid the wrong division caused by noise at hard division stage. On the other hand, covariance matrices based local density is presented to better capture dynamic characteristics of the process. In the multi-model stage, a hybrid prediction model under stable state and XGBoost-based model under vibration state are established to predict the strip floating height. The hybrid prediction model is composed of mechanism model and data driven model. The mechanism model is proposed by combining the force balance equation and inviscid theory which can predict the major information of the floating height and the data driven model compensates the error of the mechanism model. A mount of experiments have been carried out on the existing air cushion experimental platform and show desirable prediction effect.
The phases of high-entropy alloys (HEAs) are crucial to their material properties. Although meta-learning can recommend a desirable algorithm for materials designers, it does not utilize the optimal solution information of similar historical problems in the HEA field. To address this issue, a transferable meta-learning model (MTL-AMWO) based on an adaptive migration walrus optimizer is proposed to predict the phases of HEAs. Firstly, a transferable meta-learning algorithm frame is proposed, which consists of meta-learning based on adaptive migration walrus optimizer, balanced-relative density peaks clustering, and transfer strategy. Secondly, an adaptive migration walrus optimizer model is proposed, which adaptively migrates walruses according to the changes in the average fitness value of the population over multiple iterations. Thirdly, balanced-relative density peaks clustering is proposed to cluster the samples in the source and target domains into several clusters with similar distributions, respectively. Finally, the transfer strategy adopts the maximum mean discrepancy to find the most matching historical problem and transfer its optimal solution information to the target domain. The effectiveness of MTL-AMWO is validated on 986 samples from six datasets, including 323 quinary HEAs, 366 senary HEAs, and 297 septenary HEAs. The experimental results show that the MTL-AMWO achieves better performance than other algorithms.
In air cushion furnace, the floating height is a key process parameter which greatly affects the quality and production efficiency of high quality metal strips. However, the floating height is hard to be collected in the complex and abominable industry environment. Furthermore, due to the flow field characteristics, some important process variables are difficult to accurately calculate by traditional mechanism modeling methods. In order to accurately predict the floating height, firstly, a low discrepancy heuristic evolution ELM and ground effect theory based serial hybrid soft sensor model is proposed, which constituted by a mechanism model and two data driven models. Secondly, based on the force equilibrium equation and ground effect theory, the mechanism model is constructed, which describes the relationship between the floating height and the process variables including the jet impact angle. Thirdly, a low discrepancy heuristic evolution ELM is proposed as the data driven model to predict the jet impinging angle. In the data driven model, the novel dual mutation strategies collaboration differential evolution is proposed to guarantee the low discrepancy and physical applicability of data driven model. The effectiveness of the proposed method was validated on the self-developed air cushion experiment platform and got desirable experimental results. The research lays an important foundation for the successful implementation of monitoring and control of the strip floating process.