Bekir Cihad Bal

Prof. Dr. Bekir Cihad Bal

orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 February 2013 in Drying Technology
Verified
Journal Article
Closed access
BBBekir Cihad Bal
Bekir Cihad Bal
İBİbrahim Bektaş
İbrahim Bektaş
Heat treatment is a well-known method for modifying wood that is applied in different ways, and treatment schedules change from tree to tree. This treatment improves the physical properties of wood but, in general, it reduces the mechanical properties of wood. The effects of heat treatment on the mechanical properties of juvenile and mature wood of the same tree species have not been well-defined. Therefore, we focused our study on the differences in the mechanical properties of juvenile wood and mature wood of Eucalyptus grandis after both were subjected to heat treatment. Wood samples were treated at temperatures of 120, 150, and 180°C for 4, 6, and 8 h. The test results showed that decreases in the mechanical properties of juvenile wood (e.g., modulus of elasticity (MOE), modulus of rupture (MOR), compression strength (CS), and impact bending (IB)) were greater than the decreases that occurred in mature wood that was heat treated at the same conditions.

1 January 2016 in Maderas. Ciencia y Tecnología
Verified
Journal Article
Open access
PDF file
BBBekir Cihad Bal
Bekir Cihad Bal
Fast-growing tree species are important due to their short growth time before they are harvested. Both the Poplar and Eucalyptus species are fast-growing trees. These two species have been cultivated in many parts of the world, and they are used in several ways, including in the pulp and paper industry, as wood- based panels, and as structural composite lumber. In this study, laminated veneer lumbers were produced using different combinations of Poplar (Populus x euramericana I-214) and Eucalyptus (Eucalyptus grandis) veneers. Some physical and mechanical properties, including density, thickness swelling, water absorption, modulus of elasticity, modulus of rupture, impact bending, and bonding performance were investigated. According to the test data that were obtained, the mechanical properties of laminated veneer lumbers produced with Eucalyptus were greater than those of laminated veneer lumbers produced with Poplar. When the two were combined and Eucalyptus was used as the top and bottom plies, the mechanical properties also were better than those of Poplar laminated veneer lumbers. As a result, it can be said that both Poplar and Eucalyptus veneers can be used to produce laminated veneer lumbers, and Poplar laminated veneer lumbers can be reinforced with Eucalyptus veneers.

31 May 2012 in BioResources
Verified
Journal Article
Closed access
BBBekir Cihad Bal
Bekir Cihad Bal
İBİbrahim Bektaş
İbrahim Bektaş
In this study, the bending strength and stiffness of laminated veneer lumber (LVL) produced from beech (Fagus orientalis L.), poplar (Populus x euramericana I-214), and eucalyptus (Eucalyptus grandis W. Hill ex Maiden) wood using urea formaldehyde (UF), melamine urea formaldehyde (MUF), and phenol formaldehyde (PF) adhesives were determined. The tests were conducted in the flatwise and edgewise directions. The modulus of rupture (MOR), modulus of elasticity (MOE), specific modulus of rupture (SMOR), and specific modulus of elasticity (SMOE) were calculated. Variance analysis of the bending properties indicated that the effects of the species of tree, the direction of the load, and the type of adhesive were statistically significant. However, according to variance analysis of the SMOR, the effects of the type of adhesive were not significant. The results showed that the type of adhesive did not influence the bending properties of laminated veneer lumber. It can be stated that the differences among groups were due to differences in their densities. The direction of the load and the species of the tree had significant effects on the bending properties.

17 October 2013 in European Journal of Wood and Wood Products
Verified
Journal Article
Closed access
PDF file
BBBekir Cihad Bal
Bekir Cihad Bal

24 December 2014 in Maderas. Ciencia y Tecnología
Verified
Journal Article
Open access
PDF file
BBBekir Cihad Bal
Bekir Cihad Bal
İBİbrahim Bektaş
İbrahim Bektaş
ÝBÝbrahim Bektaþ
Ýbrahim Bektaþ
In this study, we determined the flexural properties and tensile shear strength of five-ply plywood panels produced with eucalyptus (Eucalyptus grandis), beech (Fagus orientalis), and hybrid poplar (Populus x euramericana) using urea-formaldehyde (UF), melamine-urea-formaldehyde (MUF) and phenol-formaldehyde (PF) adhesives. Flexural properties were tested on both parallel and perpendicular to grain samples. Tensile shear-strength tests were conducted on four glue lines of the plywood panels, and the effects of species of trees, type of adhesives, and direction of load were determined. The results of variance analyses showed that the effects of species of trees, direction of load, and type of adhesive on flexural properties were significant, but it was determined by specific flexural properties that the effect of the type of adhesive was based on the density of the plywood. In addition, as a result of findings, it can be said that specific mechanical properties may be a good predictor for comparative studies.

4 June 2018 in BioResources
Verified
Journal Article
Closed access
BBBekir Cihad Bal
Bekir Cihad Bal
The use of heat treatment to modify wood using different treatment heat transfer media, such as nitrogen, vegetable oil, steam, and vacuum, is preferable in many respects to other methods that use chemical treatments. However, the results of the heat treatment differ based on the heat transfer media that are used. In this study, the thermal modification of black pine wood in vacuum, nitrogen, and air atmospheres was studied. The heat treatments were conducted at temperatures of 180 °C, 200 °C, and 220 °C. After the heat treatments, the density, mass loss, modulus of rupture, modulus of elasticity, and impact of bending of heat-treated black pine wood were determined. The results indicated that the density, modulus of rupture, and impact of bending decreased as the temperature increased. In addition, the greatest decrease in the mechanical properties of the wood occurred in the test samples that were treated in air. The vacuum atmosphere was least harmful to the mechanical properties of the wood, and the differences in the mechanical properties of the wood that were heat treated in vacuum and nitrogen were unnoticeable.