Buttermilk, the by‐product of butter production, due to good technological features and excellent nutritional and health‐promoting properties finds more and more applications in food industry. Considerable amount of polar lipids causes that buttermilk exhibits emulsifying and stabilizing effect and may be used to improve the product quality. The study aimed to design new kind of ice cream, in which all milk is substituted by buttermilk. Within the study, we compared physicochemical parameters, color, texture, and sensory properties of control milk ice cream (C), ice cream from sweet buttermilk (SB), and ice cream from cultured buttermilk (CB). Ice cream was tested on the production day, and some characteristics were tested also after 14 and 28 days of storage at −18 ± 1°C. The study showed that samples of ice cream from cultured buttermilk had the highest acidity and were the most resistant to melting. The samples did not differ in over‐run value. The use of buttermilk influenced the texture of ice cream and product from sweet buttermilk had the highest stickiness during the storage. The color analysis showed that the highest lightness parameter had ice cream from cultured buttermilk, while samples from sweet buttermilk had the most greenish‐yellow characteristics. All the obtained products had good sensory characteristics, only cultured buttermilk ice cream slightly deteriorated after 28 storage days. Good quality properties cause that buttermilk may be successfully used as substitution of milk in ice‐cream formula and may improve its quality by exhibiting of some emulsifying stabilizing effect.

The valorization of food industry by-products is still a major challenge. Here, we report the production of acid whey fermented beverages stabilized with flaxseed gum (derived from oil industry by-product). Four variants of drinks were prepared: (1) fermented whey (W), (2) fermented whey with milk powder added (5% w/v) (WMP), (3) fermented whey with flaxseed gum added (0.5% w/v) (WFG1) and (4) fermented whey with flaxseed gum added (1.0 % w/v) (WFG2). The beverages were kept in refrigerated conditions (5 ± 1 °C) for 28 days. Alterations in lactic acid bacteria population, pH, titratable acidity, water activity, syneresis, viscosity, acetaldehyde content, color, consumer acceptance, bio-active compounds and antioxidant activity were identified. The findings revealed that flaxseed gum addition significantly enhanced bacteria survivability and improved the viscosity of acid whey at a level comparable with milk powder, meeting consumer acceptance criteria. The beverages were characterized by normative physicochemical properties and showed high antioxidant activity and free amino acids level. The use of valuable by-products from the dairy and oil industries opens up a promising route for the production of innovative beverages, which is in accordance with the principles of circular economy and the idea of zero waste.

The dairy industry releases huge amounts of by-products. One of them is buttermilk, obtained during butter production. This by-product is characterized by high nutritional and technological value and is finding more and more applications in food production. This study aimed to produce and analyze the characteristics of quark cheese obtained entirely from buttermilk during 3-week refrigerated (4 ± 1 °C) storage. Four kinds of sour buttermilk were used: two from industrial butter production, and another two from butter production at laboratory scale. Laboratory buttermilk differs in the kind of starter culture used in the production. The evaluation of cheese quality properties included physicochemical analyses, texture measurement, and sensory assessment. The results showed that the kind of buttermilk used in production influences the acidity, total solids, textural characteristics, and fat content of the obtained quark cheeses. All obtained cheeses had very high sensory quality throughout the storage period. The study indicates that buttermilk may be successfully used as a substitution for milk in quark cheese production.

Camembert is a type of surface-mold-ripened soft cheese traditionally produced from cow’s milk. Buttermilk, a by-product of butter production with beneficial nutritional and technological properties, is increasingly being used in various applications, including cheesemaking. Therefore, this study aimed to use sweet buttermilk (BM) in combination with milk at concentrations of 10% (w/w) (BM10) and 20% (w/w) (BM20) for the production of Camembert-type cheese. A control cheese made entirely from milk was also produced. The cheese samples underwent a 28-day ripening process during which their composition, acidity, water activity, color, and sensory properties were examined at 1-week intervals. The microstructure of the matured Camembert-type cheese samples was analyzed using scanning electron microscopy (SEM), and their texture was evaluated. The production yield of BM20 cheese (18.03 ± 0.29 kg/100 kg) was lower (p < 0.05) than that of the control (19.92 ± 0.23 kg/100 kg), with BM10 showing the distinctly lowest yield (14.74 ± 0.35 kg/100 kg). The total solid and fat content of BM Camembert-type cheese samples was lower than the control. However, the total protein content in cheese BM20 at the end of the ripening period was the same as that of the control. The changes in acidity in all samples were typical for Camembert cheese, and water activity was high (above 0.92). The sensory properties of all samples were characteristic of the cheese type, while the color of BM cheese samples differed from the control. The microstructure of BM10 and BM20 cheese variants was similar, namely homogenous and less porous compared to the control. In terms of texture, the BM samples had significantly lower hardness, adhesiveness, and gumminess. This study indicates that sweet BM, particularly at a concentration of 20%, may be effectively used in the production of Camembert-type cheese.

Organic dairy products, including fermented milk, are gaining popularity among consumers. Traditionally, for kefir production, kefir grains are used; however, in the modern industry, freeze-dried cultures are commonly employed. This study aimed to analyze the quality of kefirs produced from organic cow milk with two fermentation times (12 and 24 h) with the use of kefir grains or freeze-dried culture. During a 3-week storage period, physicochemical properties, color, syneresis index, texture, sensory, and microbiological quality were evaluated. The results proved that organic cow milk was suitable for kefir production both with the use of kefir grains and freeze-dried culture. Using freeze-dried culture and a 24 h fermentation period resulted in kefir with the lowest syneresis tendency (3.65–9.62%), along with the best textural properties (the highest cohesiveness and viscosity index), and desired sensory characteristics. Kefir grains had a better acidification ability, and the resulting products had a higher count of yeasts, lactobacilli, and lactococci compared with kefirs obtained with freeze-dried culture. However, both the type of starter culture and the fermentation time influenced the product’s quality. The longer fermentation time of 24 h was more appropriate for the kefir production. Kefir grains, as a traditional form of kefir culture, may be preferred in organic kefir production.