The coal mine wind shaft is an important ventilation channel in coal mines, and it is of great significance to ensure its long-term safety. At present, the inspection of wind shafts still depends on manual work, which has low reliability and high risk. There are two main problems in the shaft wall detection of ventilation shafts: (1) The humidity and dust concentration in ventilation shafts are high, which makes imaging difficult; (2) the cracks on the shaft wall are long and irregular, so it is impossible to acquire the information of the whole crack from a single photo. Firstly, the mapping analysis between the concentration of water vapor and dust in the wind shaft and the image definition is determined by experiments. Then, the inspection robot is designed to move along the axial and circumferential directions to get close to the shaft wall, and the rack-and-rail drive design is adopted to ensure the real-time position feedback of the robot. Then, through the crack parameter detection method based on depth learning, the movement direction of the robot is controlled according to the crack direction so as to ensure that the complete crack parameters are obtained. Finally, the crack detection algorithm is verified by experiments.

Snake robots require autonomous localization and mapping capabilities for field applications. However, the characteristics of their motion, such as large turning angles and fast rotation speeds, can lead to issues like drift or even failure in positioning and map building. In response to this situation, this paper starts from the gait motion characteristics of the snake robot itself, proposing an improved gait motion method and a tightly coupled method based on IMU and visual information to solve the problem of poor algorithm convergence caused by head-shaking in snake robot SLAM. Firstly, the adaptability of several typical gaits of the snake robot to SLAM methods was evaluated. Secondly, the serpentine gait was selected as the object of gait improvement, and a head stability control method for the snake robot was proposed, thereby reducing the interference of the snake robot’s motion on the sensors. Thirdly, a visual–inertial tightly coupled SLAM method for the snake robot’s serpentine gait and Arc-Rolling gait was proposed, and the method was verified to enhance the robustness of the visual SLAM algorithm and improve the positioning and mapping accuracy of the snake robot. Finally, experiments proved that the methods proposed in this paper can effectively improve the accuracy of positioning and map building for snake robots.