In the present study, a green, scalable, and environmentally friendly approach was developed for the fabrication of Bi2S3-decorated CdS nanoparticles with an efficient hydrogen generation ability from the water. As a sulfur source, thiourea was used. The process was completed in two stages: mechanical activation and thermal annealing. The presence of spherical CdS nanoparticles and Bi2S3 nanorods in the CdS/Bi2S3 nanocomposite was confirmed and proved by XRD, Raman spectroscopy, SEM-EDS, and TEM. The synthesized CdS/Bi2S3 nanocomposites were evaluated for their photocatalytic hydrogen evolution capabilities. The CdS/Bi2S3 photocatalyst exhibited 25% higher photocatalytic activity compared to CdS, reaching a hydrogen evolution rate of 996.68 μmol h−1g−1 (AQE 0.87%) after 3.5 h under solar-light irradiation.
28 February 2024 in Semiconductor Science and Technology
In this work, we have developed a facile, dry, and environmentally friendly mechanochemical method for the synthesis of cadmium sulfide (m-CdS) nanoparticles in a planetary ball mill using non-toxic precursors. Thiourea was for the first time used as a precursor of sulfide ion in room temperature solid state ball milling synthesis. For comparison of the mechanochemical approach with others, cadmium sulfide nanoparticles were also prepared using the solvothermal method (s-CdS). The crystal structure of cadmium sulfide nanoparticles was studied by XRD, the qualitative chemical band properties were examined by Raman scattering and x-ray photoelectron spectroscopy analysis, and particle morphology and microstructure were investigated by scanning electron microscopy and transmission electron microscopy methods. The sizes of the m-CdS nanoparticles had 5–6 nm in diameter, which is 10 times smaller than the diameter of s-CdS nanorods. The photocatalytic activities of as-prepared cadmium sulfide nanoparticles on the dye degradation and hydrogen production by water splitting were evaluated and the antibacterial activities were also tested. The photocatalytic activity of m-CdS was superior to that of s-CdS in the degradation of Orange II under visible light irradiation. Better results for m-CdS were also evidenced in photocatalytic experiments on hydrogen generation. The maximum rate of hydrogen evolution for m-CdS was 191.9 µmolg−1h−1 at the 120th min,while this indicator for s-CdS was only 58.0 µmolg−1h−1 at the same irradiation time.The better effect of m-CdS was evidenced also in an antibacterial study (namely against gram-positive bacteria).
18 August 2025 in Journal of Environmental Chemical Engineering
The task of this article is to update, develop and introduce into scientific practice the method of "mechanochemical recrystallization" in solid-phase systems with small additives of the liquid phase of the solvent and solid-phase precursors to stabilize the formed nanoparticles. The essence of this method is shown using the example of mechanical activation of the S–AgNO3–NH4X system, where X = Cl, Br, I, with the addition of dimethyl sulfoxide (DMSO), and the resulting mechanochemical synthesis of sulfur-containing nanocomposites S/AgX with the controlled content of sulfur nanoparticles (nanosulfur). The predetermined content of nanosulfur in nanocomposites is ensured by a continuous process of dissolution-crystallization (recrystallization) of starting sulfur in the DMSO medium in a mechanochemical reactor. The proposed technical solution made it possible to obtain S/AgX nanocomposites by a single mechanical treatment of powder precursors – AgNO3, NH4Х, NH4NO3 (diluent), commercial sulfur and DMSO in planetary ball mills with various milling tools. The method also includes washing the water-soluble components of mechanosynthesis.