Gait event detection is a crucial part in the motion control and performance evaluation of exoskeleton robots. To detect the whole gait events conveniently and effectively, a wearable system based on infrared distance sensors is proposed. The heel and toe clearances were used for the first time for the online detection of all six gait events in one gait cycle. Smart shoes integrated with three infrared distance sensors were designed to obtain stable distance signals, which were then converted into effective foot posture information. Moreover, an online detection algorithm was proposed using local search windows and fixed thresholds, resulting in a minimal time delay and a small computational burden. By comparing the system with the motion capture system at different walking speeds, the average detection error of gait events is within 34ms, and the average detection rate of the system is 99.62%. When applied to a lower extremity exoskeleton robot, the system successfully detects all gait events of the human-robot synchronous walk. The results show that the system has good real-time performance and high detection rate. This study provides a convenient and reliable detection method for gait research of human body and exoskeleton robots.
The motorized spindle is the core component of CNC machine tools, and the vibration of it reduces the machining precision and service life of the machine tools. Owing to the fast response, large output force, and displacement of the piezoelectric stack, it is often used as the actuator in the active vibration control of the spindle. A piezoelectric self-sensing actuator (SSA) can reduce the cost of the active vibration control system and simplify the structure by eliminating the use of a sensor, because a SSA can have both actuating and sensing functions at the same time. The signal separation method of a SSA based on a bridge circuit is widely applied because of its simple principle and easy implementation. However, it is difficult to maintain dynamic balance of the circuit. Prior research has used adaptive algorithm to balance of the bridge circuit on the flexible beam dynamically, but those algorithms need no correlation between sensing and control voltage, which limit the applications of SSA in the vibration control of the rotor-bearing system. Here, the electromechanical coupling model of the piezoelectric stack is established, followed by establishment of the dynamic model of the spindle system. Next, a new adaptive signal separation method based on the bridge circuit is proposed, which can separate relative small sensing voltage from related mixed voltage adaptively. The experimental results show that when the self-sensing signal obtained from the proposed method is used as a displacement signal, the vibration of the motorized spindle can be suppressed effectively through a linear quadratic Gaussian (LQG) algorithm.
In its working process, a high-speed motorized spindle bearing-rotor system is affected by a variety of vibration excitations, which severely affect the machining precision and reliability. In view of the problems in the active vibration control of current smart-material-based bearing-rotor systems and based on the structural layout of a piezoelectric device and a controlled bearing-rotor system, a bearing was directly connected to a piezoelectric actuator via a sleeve, which improved the working efficiency of the piezoelectric stack actuator. Furthermore, to improve the robustness of the system’s vibration control performance under different external excitations (e.g., cutting force and mass unbalance), uncertainties in internal parameters (changes in bearing stiffness and stiffness nonlinearity of piezoelectric materials), process and measure noises, a mixed state feedback algorithm based on norm optimization and a Kalman filter observer with state disturbance estimation was established. The dynamic and robust performance of the proposed method was compared with that of the linear quadratic Gaussian optimal control methods and output feedback control method through both simulation and experiment by changing the piezoelectric stacks without changing the control program.
23 December 2019 in Journal of Physics D: Applied Physics
This paper presents an elastic metamaterial shaft with a new class of stack-like resonators consisting of bonded periodically annular rubber and lead rings that support the formation of ultra-low-frequency vibration band gaps because of reduced stiffness resulting from the discretized rubber rings. By using finite element method, the band structures and the transmission power spectra of the proposed metamaterial shaft are investigated. Subsequently, the mechanism of the band gaps is illustrated by analyzing the displacement fields of extracted mode shapes at the edge of band gaps. Lastly, finite element method is used to explore the effects of geometrical parameters on the band gaps. The related results confirm the very-low-frequency vibration mitigation performance of the proposed meta-shaft below 120 Hz and indicate there is a complete bandgap in which flexural, longitudinal and torsional vibration can be simultaneously attenuated. Moreover, multiple flexural band gaps are observed in the concerned region of frequencies in our design, and the mechanism behind this characteristic is analyzed by eigenmodes. The new structure presented here can thus be used to reduce vibrations of shaft-like structures at low frequencies in the practical environment.
To date, phononic crystals/metamaterials normally adopt classical periodic configurations, and optimization strategies for them are based primarily on dispersion relations from a repeated unit cell. In this study, a frequency response function (FRF) based optimization scheme is presented for a locally resonant metamaterial beam that considers both the resonant frequencies and distribution locations of the resonators. Three optimization objectives involving (1) broadband, (2) multi-band, and (3) high-attenuation characteristics are exploited as study cases, and a single-objective genetic algorithm is used to determine the optimal solutions for the prescribed bandgap targets. The spectral element method is used as an analytic formulation to determine the metamaterial FRFs, and the finite element method is used to validate the effectiveness of the optimization strategy. The results reveal that these objective bandgap characteristics can be enabled without increasing the resonator mass following the proposed optimization procedure. This shows the potential of adjusting the locations and resonance frequencies of resonators in metamaterial beams beyond the widely accepted periodic structures. The most important finding of this study is that promising bandgap properties can be easily realized with only single-degree-of-freedom resonators instead of designing more complex ones or multi-resonators. This FRF-based optimization method can be considered as a simple but instructive strategy for optimal or inverse designs in metamaterials.