This work aims to provide a comprehensive understanding of the structural impact of micro-texture on the properties of bearing capacity and friction coefficient through numerical simulation and theoretical calculation. Compared to the traditional optimization method of single-factor analysis (SFA) and orthogonal experiment, the multivariate linear regression (MLA) algorithm can optimize the structure parameters of the micro-texture within a wider range and analyze the coupling effect of the parameters. Therefore, in this work, micro-textures with varying texture size, area ratio, depth, and geometry were designed, and their impact on the bearing capacity and friction coefficient was investigated using SFA and MLA algorithms. Both methods obtained the optimal structures, and their properties were compared. It was found that the MLA algorithm can further improve the friction coefficient based on the SFA results. The optimal friction coefficient of 0.070409 can be obtained using the SFA method with a size of 500 µm, an area ratio of 40%, a depth of 5 µm, and a geometry of the slit, having a 10.7% reduction compared with the texture-free surface. In comparison, the friction coefficient can be further reduced to 0.067844 by the MLA algorithm under the parameters of size of 600 µm, area ratio of 50%, depth of 9 µm, and geometry of the slit. The final optimal micro-texture surface shows a 15.6% reduction in the friction coefficient compared to the texture-free surfaces and a 4.9% reduction compared to the optimal surfaces obtained by SFA.
Under extreme conditions in fields including aerospace exploration, deep earth excavation, and ocean engineering, mechanical components are subjected to severe environmental challenges, such as high temperature, heavy load, fatigue fracture and corrosion, which significantly limit their service life and operational reliability. Surface engineering has emerged as a critical strategy to address these problems by modifying surface characteristics while preserving basic properties of raw materials. Among various surface modification techniques, laser-based surface modification stands out due to its precise processing, high throughput, and outstanding surface performance. However, laser-based surface modification of metallic materials for industrial applications remains limited owing to inadequate systematic understanding regarding the fabrication mechanisms. Accordingly, a comprehensive and holistic review is essential to elucidate the effect of laser-based surface modification on process optimization, system development, microstructure evolution, and performance enhancement. This review systematically expounds two fundamental strategies in laser surface modification-based material modification (exemplified by laser cladding) and structural modification (exemplified by laser shock peening) in terms of mechanism, process, performance and application. In addition, the mechanism and potential of the synergistic integration of LC (laser cladding) and LSP (laser shock peening) are emphatically discussed. Finally, perspectives regarding process optimizations, material developments, and system improvements for laser surface engineering are presented. By establishing a clear “mechanism–process–performance–application” narrative, this review aims to provide both a scientific reference and a practical guideline for the severe demands of extreme operating conditions.