The characteristics of primary carbides in a commercial-sized (one ton) electroslag remelting (ESR) ingot of AISI H13 steel were investigated. The interaction between the primary carbides and inclusions was also clarified. The results indicate that there are two types of primary carbides, V-rich and Mo-rich primary carbides, in the H13 ESR ingot. The quantity, the area fraction, and the size of the two primary carbides tend to decrease from the center of the H13 ESR ingot to the outer surface. Additionally, the V-rich primary carbide is obviously larger than the Mo-rich primary carbide. The Al₂O₃ inclusion can promote the precipitation of the V-rich primary carbide, while the MnS inclusion encourages the precipitation of Mo-rich primary carbide. The CaO∙Al₂O₃ inclusion cannot act as the nucleation site for the precipitation of the two primary carbides. The solid fraction that the V-rich primary carbide begins to precipitate ranges from 0.965 to 0.983, and that for the Mo-rich primary carbide and the MnS inclusion change from 0.9990 to 0.9998 and from 0.989 to 0.990, respectively.

A comprehensive transient model is developed to study the effect of electrode rotation on the evolution of metal pool profiles and the solidification quality of ESR ingots. Magnetohydrodynamic flow, heat transfer, solidification, and electrode melting are considered simultaneously in the model. The growth of the ESR ingot is predicted using the dynamic layering method. The numerical results show that the productivity reaches a maximum of 15.97% at the rotating speed of 40 rpm without increasing power. With the increasing rotating speed, the maximum temperature of the melt decreases, and the temperature distribution becomes more uniform. Compared with the static one, the pool profiles are flattened by −1.19%, −8.52%, and 12.44% at the rotating speeds of 20, 40, and 60 rpm, respectively. The metal pool profile was improved remarkably, but only at the higher speed (i.e., 60 rpm). The effect of rotating speed on the metal pool profile depends on the competition between the melting rate and slag temperature. Meanwhile, the local solidification time and the secondary dendrite arm spacing are slightly improved at lower rotating speeds but are significantly worse at higher rotating speeds.