Recent studies have highlighted the potential of linking fire behaviour to plant ecophysiology as an improved route to characterising severity, but research to date has been limited to laboratory-scale investigations. Fine-scale fire behaviour during prescribed fires has been identified as a strong predictor of post-fire tree recovery and growth, but most studies report these metrics averaged over the entire fire. Previous research has found inconsistent effects of low-intensity fire on mature Pinus ponderosa growth. In this study, fire behaviour was quantified at the tree scale and compared with post-fire radial growth and axial resin duct defences. Results show a clear dose–response relationship between peak fire radiative power per unit area (W m–2) and post-fire Pinus ponderosa radial growth. Unlike in previous laboratory research on seedlings, there was no dose–response relationship observed between fire radiative energy per unit area (J m–2) and post-fire mature tree growth in the surviving trees. These results may suggest that post-fire impacts on growth of surviving seedlings and mature trees require other modes of heat transfer to impact plant canopies. This study demonstrates that increased resin duct defence is induced regardless of fire intensity, which may decrease Pinus ponderosa vulnerability to secondary mortality agents.

Fire activity, in terms of intensity, frequency, and total area burned, is expected to increase with a changing climate. A challenge for landscape-level assessment of fire effects, often termed burn severity, is that current remote sensing assessments provide very little information regarding tree/vegetation physiological performance and recovery, limiting our understanding of fire effects on ecosystem services such as carbon storage/cycling. In this paper, we evaluated whether spectral indices common in vegetation stress and burn severity assessments could accurately quantify post-fire physiological performance (indicated by net photosynthesis and crown scorch) of two seedling species, Larix occidentalis and Pinus contorta. Seedlings were subjected to increasing fire radiative energy density (FRED) doses through a series of controlled laboratory surface fires. Mortality, physiology, and spectral reflectance were assessed for a month following the fires, and then again at one year post-fire. The differenced Normalized Difference Vegetation Index (dNDVI) spectral index outperformed other spectral indices used for vegetation stress and burn severity characterization in regard to leaf net photosynthesis quantification, indicating that landscape-level quantification of tree physiology may be possible. Additionally, the survival of the majority of seedlings in the low and moderate FRED doses indicates that fire-induced mortality is more complex than the currently accepted binary scenario, where trees survive with no impacts below a certain temperature and duration threshold, and mortality occurs above the threshold.

Forest ecosystems provide critical ecosystem goods and services, and any disturbance-induced changes can have cascading impacts on natural processes and human socioeconomic systems. Forest disturbance frequency, intensity, and spatial and temporal scale can be altered by changes in climate and human activity, but without baseline forest disturbance data, it is impossible to quantify the magnitude and extent of these changes. Methodologies for quantifying forest cover change have been developed at the regional-to-global scale via several approaches that utilize data from high (e.g., IKONOS, Quickbird), moderate (e.g., Landsat) and coarse (e.g., Moderate Resolution Imaging Spectroradiometer (MODIS)) spatial resolution satellite imagery. While detection and quantification of forest cover change is an important first step, attribution of disturbance type is critical missing information for establishing baseline data and effective land management policy. The objective here was to prototype and test a semi-automated methodology for characterizing high-magnitude (>50% forest cover loss) forest disturbance agents (stress, fire, stem removal) across the conterminous United States (CONUS) from 2003–2011 using the existing University of Maryland Landsat-based Global Forest Change Product and Web-Enabled Landsat Data (WELD). The Forest Cover Change maps were segmented into objects based on temporal and spatial adjacency, and object-level spectral metrics were calculated based on WELD reflectance time series. A training set of objects with known disturbance type was developed via high-resolution imagery and expert interpretation, ingested into a Random Forest classifier, which was then used to attribute disturbance type to all 15,179,430 forest loss objects across CONUS. Accuracy assessments of the resulting classification was conducted with an independent dataset consisting of 4156 forest loss objects. Overall accuracy was 88.1%, with the highest omission and commission errors observed for fire (32.8%) and stress (31.9%) disturbances, respectively. Of the total 172,686 km² of forest loss, 83.75% was attributed to stem removal, 10.92% to fire and 5.33% to stress. The semi-automated approach described in this paper provides a promising framework for the systematic characterization and monitoring of forest disturbance regimes.

Numerous individual tree detection (ITD) methods have been developed for use with airborne laser scanning (ALS) data to provide tree-scale forest inventories across large spatial extents. Despite the growing number of methods, relatively few have been comparatively assessed using a single benchmark forest inventory validation dataset, limiting their operational application. In this study, we assessed seven ITD methods, representing three common approaches (point-cloud-based, raster-based, hybrid), across coniferous forest stands with diverse structure and composition to understand how ITD and height measurement accuracy vary with method, input parameters and data, and stand density. There was little variability in accuracy between the ITD methods where the average F-score and standard deviation (±SD) were 0.47 ± 0.03 using a lower pulse density ALS dataset with an average of 8 pulses per square meter (ppm²) and 0.50 ± 0.02 using a higher pulse density ALS dataset with an average of 22 ppm². Using higher ALS pulse density data produced higher ITD accuracies (F-score increase of 10–13%) in some of the methods versus more modest gains in other methods (F-score increase of 1–3%). Omission errors were strongly related with stand density and largely consisted of suppressed trees underneath the dominant canopy. Simple canopy height model (CHM)-based methods that utilized fixed-size local maximum filters had the lowest omission errors for trees across all canopy positions. ITD accuracy had large intra-method variation depending on input parameters; however, the highest accuracies were obtained when parameters such as search window size and spacing thresholds were equal to or less than the average crown diameter of trees in the study area. All ITD methods produced height measurements for the detected trees that had low RMSE (<1.1 m) and bias (<0.5 m). Overall, the results from this study may help guide end-users with ITD method application and highlight future ITD method improvements.

Individual Tree Detection (ITD) algorithms that use Airborne Laser Scanning (ALS) data can provide accurate tree locations and measurements of tree-level attributes that are required for stand-to-landscape scale forest inventory and supply chain management. While numerous ITD algorithms exist, few have been assessed for accuracy in stands with complex forest structure and composition, limiting their utility for operational application. In this study, we conduct a preliminary assessment of the ability of the ForestView^® algorithm created by Northwest Management Incorporated to detect individual trees, classify tree species, live/dead status, canopy position, and estimate height and diameter at breast height (DBH) in a mixed coniferous forest with an average tree density of 543 (s.d. ±387) trees/hectare. ITD accuracy was high in stands with lower canopy cover (recall: 0.67, precision: 0.8) and lower in stands with higher canopy cover (recall: 0.36, precision: 0.67), mainly owing to omission of suppressed trees that were not detected under the dominant tree canopy. Tree species that were well-represented within the study area had high classification accuracies (producer’s/user’s accuracies > ~60%). The similarity between the ALS estimated and observed tree attributes was high, with no statistical difference in the ALS estimated height and DBH distributions and the field observed height and DBH distributions. RMSEs for tree-level height and DBH were 0.69 m and 7.2 cm, respectively. Overall, this algorithm appears comparable to other ITD and measurement algorithms, but quantitative analyses using benchmark datasets in other forest types and cross-comparisons with other ITD algorithms are needed.

The combination of drought and fire can cause drastic changes in forest composition and structure. Given the predictions of more frequent and severe droughts and forecasted increases in fire size and intensity in the western United States, we assessed the impact of drought and different fire intensities on Pinus ponderosa saplings. In a controlled combustion laboratory, we exposed saplings to surface fires at two different fire intensity levels (quantified via fire radiative energy; units: MJ m⁻²). The recovery (photosynthesis and bud development) and mortality of saplings were monitored during the first month, and at 200- and 370-days post-fire. All the saplings subjected to high intensity surface fires (1.4 MJ m⁻²), regardless of the pre-fire water status, died. Seventy percent of pre-fire well-watered saplings recovered after exposure to low intensity surface fire (0.7 MJ m⁻²). All of the pre-fire drought-stressed saplings died, even at the lower fire intensity. Regardless of the fire intensity and water status, photosynthesis was significantly reduced in all saplings exposed to fire. At 370 days post-fire, burned well-watered saplings that recovered had similar photosynthesis rates as unburned plants. In addition, all plants that recovered or attempted to recover produced new foliage within 35 days following the fire treatments. Our results demonstrate that the pre-fire water status of saplings is an important driver of Pinus ponderosa sapling recovery and mortality after fire.