With the gradual miniaturization of electronic devices and the increasing interest in wearable devices, flexible microelectronics is being actively studied. Owing to the limitations of existing battery systems corresponding to miniaturization, there is a need for flexible alternative power sources. Accordingly, energy harvesting from surrounding environmental systems using fluorinated polymers with piezoelectric properties has received significant attention. Among them, polyvinylidene fluoride (PVDF) and PVDF co-polymers have been researched as representative organo-piezoelectric materials because of their excellent piezoelectric properties, mechanical flexibility, thermal stability, and light weight. Electrospinning is an effective method for fabricating nanofibrous meshes with superior surface-to-volume ratios from polymer solutions. During electrospinning, the polymer solution is subjected to mechanical stretching and in situ poling, corresponding to an external strong electric field. Consequently, the fraction of the piezoelectric β-phase in PVDF can be improved by the electrospinning process, and enhanced harvesting output can be realized. An overview of electrospun piezoelectric fibrous meshes composed of PVDF or PVDF co-polymers to be utilized is presented, and the recent progress in enhancement methods for harvesting output, such as fiber alignment, doping with various nanofillers, and coaxial fibers, is discussed. Additionally, other applications of these meshes as sensors are reviewed.

In this study, we investigated the structural effect of composite solid electrolytes of Al-doped LLZO and PVDF-HFP (0D_Al-LLZO@PVDF-HFP and 1D_Al-LLZO@PVDF-HFP) on electrochemical (EC) performance and fire safety through a systematic evaluation and comparative tests. The unique structure and advantageous features of composite solid electrolytes (1D_Al-LLZO@PVDF-HFP) were highlighted by comparing controls (PVDF-HFP and 0D_Al-LLZO@PVDF-HFP) with physicochemical and electrochemical analyses and fire safety tests The structure and morphology of Al-doped LLZO/PVDF-HFP composites were analyzed with X-ray diffraction (XRD) and scanning electron microscopy (SEM), while their chemical functionalities and free ion clusters were examined with Fourier transform infrared (FT-IR) spectroscopy and Raman spectroscopy, respectively. The 1D_Al-LLZO@PVDF-HFP composite with a 1D structured Al-LLZO filler network in the PVDF-HFP matrix could effectively regulate the crystallinity of PVDF-HFP and facilitated lithium salt dissociation, resulting in a high lithium-ion transference number and ionic conductivity. As a result, the 1D_Al-LLZO@PVDF-HFP composite electrolyte with an optimized structure and low Al-LLZO content (~5.1 wt%) exhibited enhanced ionic conductivity ($\mathsf{\sigma }$: 1.40 × 10⁻⁴ S/cm) with low interfacial resistance, broadened EC stability (voltage window: 4.75 V vs. Li/Li⁺), and a high lithium-ion transference number (0.75) superior to that of 0D_Al-LLZO@PVDF-HFP. In electrochemical characterizations, the 1D_Al-LLZO@PVDF-HFP-based EC cell demonstrated enhanced performance in a lithium symmetric cell (>2000 h) and full cell (LiFePO₄|electrolyte|Li) of a reversible capacity of 102.7 mAh/g at 2C with a capacity retention of 85.7% over 200 cycles, better than that of a 0D_ Al-LLZO@PVDF-HFP-based EC cell. In flammability tests, Al-LLZO@PVDF-HFP demonstrated enhanced fire safety (nonflammability) compared with that of a PVDF-HFP-based electrolyte regardless of the composite structure, suggesting the importance of inorganic filler rather than their structural morphology in the composite.

Nanogenerators have garnered significant interest as environmentally friendly and potential energy-harvesting systems. Nanogenerators can be broadly classified into piezo-, tribo-, and hybrid nanogenerators. The hybrid nanogenerator used in this experiment is a nanogenerator that uses both piezo and tribo effects. These hybrid nanogenerators have the potential to be used in wearable electronics, health monitoring, IoT devices, and more. In addition, the versatility of the material application in electrospinning makes it an ideal complement to hybrid nanogenerators. However, despite their potential, several experimental variables, biocompatibility, and harvesting efficiency require improvement in the research field. In particular, maximizing the output voltage of the fibers is a significant challenge. Based on this premise, this study aims to characterize hybrid nanogenerators (HNGs) with varied structures and material combinations, with a focus on identifying HNGs that exhibit superior piezoelectric- and triboelectric-induced voltage. In this study, several HNGs based on coaxial structures were fabricated via electrospinning. PVDF-HFP and PAN, known for their remarkable electrospinning properties, were used as the primary materials. Six combinations of these two materials were fabricated and categorized into homo and hetero groups based on their composition. The output voltage of the hetero group surpassed that of the homo group, primarily because of the triboelectric-induced voltage. Specifically, the overall output voltage of the hetero group was higher. In addition, the combination group with the most favorable voltage characteristics combined PVDF-HFP@PAN(BTO) and PAN hollow, boasting an output voltage of approximately 3.5 V.

The development of metal–insulator–semiconductor (MIS) capacitors requires device miniaturization and excellent electrical properties. Traditional SiO₂ gate dielectrics have reached their physical limits. In this context, high-k materials such as TiO₂ are emerging as promising alternatives to SiO₂. However, the deposition of dielectric layers in MIS capacitors typically requires high-vacuum equipment and challenging processing conditions. Therefore, in this study, we present a new method to effectively fabricate a poly(vinylidene fluoride) (PVDF)-based TiO₂ dielectric layer via electrospinning. Nano-microscale layers were formed via electrospinning by applying a high voltage to a polymer solution, and electrical properties were analyzed as a function of the TiO₂ crystalline phase and residual amount of PVDF at different annealing temperatures. Improved electrical properties were observed with increasing TiO₂ anatase content, and the residual amount of PVDF decreased with increasing annealing temperature. The sample annealed at 600 °C showed a lower leakage current than those annealed at 300 and 450 °C, with a leakage current density of 7.5 × 10⁻¹³ A/cm² when Vg = 0 V. Thus, electrospinning-based coating is a cost-effective method to fabricate dielectric thin films. Further studies will show that it is flexible and dielectric tunable, thus contributing to improve the performance of next-generation electronic devices.

In this study, we analyze metal–insulator–metal (MIM) capacitors with different thicknesses of SixNy film (650 Å, 500 Å, and 400 Å) and varying levels of film quality to improve their capacitance density. SixNy thicknesses of 650 Å, 500 Å, and 400 Å are used with four different conditions, designated as MIM (N content 1.49), NEWMIM (N content 28.1), DAMANIT (N content 1.43), and NIT (N content 0.30). We divide the C–V characteristics into two categories: voltage coefficient of capacitance (VCC) and temperature coefficient of capacitance (TCC). There was an overall increase in the VCC as the thickness of the SixNy film decreased, with some variation depending on the condition. However, the TCC did not vary significantly with thickness, only with condition. At the same thickness, the NIT condition yielded the highest capacitance density, while the MIM condition showed the lowest capacitance density. This difference was due to the actual thickness of the film and the variation in its k-value depending on the condition. The most influential factor for capacitance uniformity was the thickness uniformity of the SixNy film.