Seismic diffractions are the responses of small-scale discontinuous structures. They contain subwavelength geologic information. Thus, diffractions can be used for high-resolution imaging. The energy of diffractions is generally much weaker than that of reflections. Therefore, diffracted energy is typically masked by specular reflected energy. Diffraction/reflection separation is a crucial preprocessing step for diffraction imaging. To resolve the diffraction-separation problem, we have developed a method based on the multichannel singular-spectrum analysis (MSSA) algorithm for diffraction separation by reflection suppression. The MSSA algorithm uses the differences in the kinematic and dynamic properties between reflections and diffractions to suppress time-linear signals (reflections) and separate weaker time-nonlinear signals (diffractions) in the common-offset or poststack domain. For the time-linear signals, the magnitudes of the singular values are proportional to the energy strength of the signals. The stronger the energy of a component of the linear signals is, the larger the corresponding singular values will be. The singular values of reflections and diffractions have dissimilar spatial distributions in the singular-value spectrum because of the differences in their linear properties and energy. Only the singular values representing diffractions are selected to reconstruct seismic signals. Synthetic data and field data are used to test our method. The results reveal the good performance of the MSSA algorithm in enhancing diffractions and suppressing reflections.

Seismic weak responses from subsurface small-scale geologic discontinuities or inhomogeneities are encoded in 3D diffractions. Separating weak diffractions from a strong reflection background is a difficult problem for diffraction imaging, especially for the 3D case when they are tangent to or interfering with each other. Most conventional diffraction separation methods ignore the azimuth discrepancy between reflections and diffractions when suppressing reflections. In fact, the reflections associated with a specific pair of azimuth-dip angle possess sparse characteristics, and the diffractions adhering to Huygens’ principle behave as low-rank components. Therefore, we have developed a 3D low-rank diffraction imaging method that uses the Mahalanobis-based low-rank and sparse matrix decomposition method for separating and imaging 3D diffractions in the azimuth-dip angle image matrix. The advantages of our 3D diffraction imaging method not only includes the handling of interfering events but also includes ensuring a better protection of weak diffractions. The numerical experiment illustrates the good performance of our method in imaging small-scale discontinuities and inhomogeneities. The field data application of carbonate reservoirs further confirms its potential value in resolving the masked small-scale cavities that can provide storage spaces and a migration pathway for petroleum.

The broken pattern of the overburden strata induced by mining has a non-ignorable effect on overlying strata movement, failure, and safety in mining production. To study the caving pattern of overlying strata and determine the calculation method of fracture pathway parameters due to roof caving induced by coal mining, the trapezoidal broken models were developed to explain and prevent water leakage, and even water inrush, during the mining process. By incorporating the variation of the volume expansion coefficient, a connection among the parameters of the fracture pathways and fracture angles, face width, and mining height could be established, which shows that the larger the degree of the fracture angle is, the smaller the value of the volume expansion coefficient and face width is with a relatively larger mining height. This relationship was also used to determine the eventual evolution configuration of the trapezoidal broken model. The presented approaches may help us to better understand the movement of overburden strata and provide an idea to help settle conflicts related to fracture space calculations induced by coal mining.

Ecosystem issues have been severely concerned and studied when the coal resource is one of major energy generators, and green mining innovation techniques involving artificial-restorations have addressed and significantly lessened negative impacts on the ecological environment. The ecosystem of a coal-mined area, however, is able to naturally restore with the processes of natural succession, similar to the human body system that has the immune ability to self-heal a wound over time if the wound does not deeply hurt the health. Here we analyze multiple discipline real data from two mining sites, and evidently show an ability of nature that the coal mining related problems such as geological cracks, damaged aquifers and destroyed soils in Quaternary period can naturally recover around a half-year after the end of mining. Our results temporally and spatially demonstrate that the damaged ecosystem has a capability of unaided nature-remediation from the ground to the subsurface, which is very useful to the countries worldwide with abundant coal reserves and intense energy demands for their development.

Seismic diffractions contain valuable information regarding small-scale inhomogeneities or discontinuities, and therefore they can be used for seismic interpretation in the exploitation of hydrocarbon reservoirs. Velocity analysis is a necessary step for accurate imaging of these diffractions. A new method for diffraction velocity analysis and imaging is proposed that uses an improved adaptive minimum variance beamforming technique. This method incorporates the minimum variance, coherence factor, and correlation properties to improve the signal-to-noise ratio and enhance correlations. Our method can make seismic diffractions become better focused in semblance panels, allowing for the optimal migration velocity for diffractions to be accurately picked. Synthetic and field examples demonstrate that the migration velocity for the diffractions can differ from that for the reflections. The results suggest that the diffraction velocity analysis and imaging method is feasible for accurately locating and identifying small-scale discontinuities, which leads to the possibility of using this approach for practical application and seismic interpretation.