As nanocrystalline (NC) materials exhibit many unique properties, which are often superior to the properties of their coarse-grained counterparts, they offer significant potential for use in a variety of applications. Owing to their high volume fraction of grain boundaries, however, the intrinsic problem of poor thermal stability substantially limits the potential application of these materials. To solve this problem, thermal stability has become an important issue in the field of NC materials. This paper reviews the progress in the investigation of the thermal stability of NC materials with emphasis on the fundamentals of grain size stabilization by different approaches. First, the stabilizing approaches are classified into two categories, namely, thermodynamic stabilization and kinetic stabilization. Second, within the framework of thermodynamics and kinetics, the progress in theoretical models, experiments, and computer simulations is comprehensively reviewed. Third, strategies that are proposed to stabilise the grain size are summarised and discussed. This paper shows that the stabilization of NC materials is feasible and can be tailored by the selection of suitable strategies to satisfy the demands of different practical applications. Finally, several issues that require further investigation are identified.
Al-Si-based casting alloys have a great potential in various industrial applications. Common strengthening strategies on these alloys are accompanied inevitably by sacrifice of ductility, known as strength-ductility trade-off dilemma. Here, we report a simple route by combining rapid solidification (RS) with a post-solidification heat treatment (PHT), i.e. a RS + PHT route, to break through this dilemma using a commercial Al-Si-based casting alloy (A356 alloy) as an example. It is shown that yield strength and elongation to failure of the RS + PHT processed alloy are elevated simultaneously by increasing the cooling rate upon RS, which are not influenced by subsequent T6 heat treatment. Breaking through the dilemma is attributed to the hierarchical microstructure formed by the RS + PHT route, i.e. highly dispersed nanoscale Si particles in Al dendrites and nanoscale Al particles decorated in eutectic Si. Simplicity of the RS + PHT route makes it being suitable for industrial scaling production. The strategy of engineering microstructures offers a general pathway in tailoring mechanical properties of other Al-Si-based alloys. Moreover, the remarkably enhanced ductility of A356 alloy not only permits strengthening further the material by work hardening but also enables possibly conventional solid-state forming of the material, thus extending the applications of such an alloy.