In this research, we introduce a metamaterial biosensor designed for the detection of various viruses. The proposed sensor configuration comprises four square split ring resonators (SRR) coupled with a central graphene ring. The strong coupling between SRR and graphene ring results in near-perfect absorption at a frequency of 1.354 THz. To enhance versatility, the sensor’s performance can be tuned and controlled by adjusting the chemical potential (μ c ) of the graphene. Additionally, we validate the sensor’s functionality through an equivalent circuit model. Moreover, the proposed sensor demonstrates outstanding performance metrics, including a high sensitivity (S) of 1.7 THz/RIU, a Figure of Merit (FOM) of 165.09 RIU -1 , high-quality factor (Q) of 112.5. Despite its reduced structural thickness of 3 μm, it remains suitable for integration into nanotechnology devices. Furthermore, the absorber exhibits exceptional absorption properties even at steep incidence angles, expanding its applicability in diverse scenarios. Its potential to detect a wide range of viruses, including malaria, dengue, herpes simplex virus, influenza, and HIV, and distinguish various cancerous cells, holds promise for advancing biosensing applications.
This paper presents a groundbreaking advancement in terahertz (THz) technology through the introduction of a novel ultrathin absorber. Composed of vanadium dioxide (VO 2 ) and graphene, this absorber offers a non-metallic solution for wideband absorption, covering an impressive frequency range from 1.198 THz to 8.752 THz (7.554 THz). Our absorber exhibits exceptional tunable and switchable performance, a significant achievement considering the challenge of achieving frequency tunability across broadband absorption ranges, which was the primary focus of our research endeavor. Furthermore, our proposed absorber demonstrates remarkable characteristics, achieving up to 80% absorption even at high incidence angles of up to 80°. Additionally, the absorber enhances Shielding Effectiveness in electromagnetic interference (EMI) shields and stealth systems, further highlighting its versatility and potential impact in various applications.
In this paper, we present a compact terahertz (THz) absorber based on a graphene-enhanced dielectric resonator structure, designed to achieve both wideband and narrowband absorption. The proposed absorber demonstrates ultra-wideband absorption from 1.07 to 13.3 THz, achieving a bandwidth of 12.23 THz, along with a sharp narrowband peak at 6.81 THz under specific tuning conditions. Tunability is achieved by adjusting the chemical potential (µc) of graphene, while the structure remains polarization-insensitive and maintains high absorption stability up to incident angles of 70°. Simulation results validated through an equivalent circuit model demonstrate the absorber’s strong performance with a maximum sensitivity (S) of 5.11 THz/RIU, figure of merit (FOM) of 601.2 RIU−1, and a quality factor (Q) of 1322.5, making it highly effective for biosensing applications, including the detection of chemicals, viruses, and cancerous cells. Additionally, for EM interference shielding, the absorber exhibits an absorption effectiveness exceeding 10 dB, and a reflectance effectiveness within 1 dB, confirming its high efficiency in suppressing reflected waves. These results highlight the absorber’s potential for versatile applications in stealth, shielding, and practical biosensing.
In this work, a compact dual-band terahertz (THz) metamaterial absorber integrated with graphene is presented for high-performance biosensing applications. The structure is composed of four concentric octagonal rings, where two are metallic and two are graphene-based, supported on a SiO2 substrate backed by a gold ground plane. The dual-resonant response is achieved through the metallic rings, while the graphene layers enhance absorption and tunability by improving impedance matching with free space. The absorber demonstrates near-unity absorption at 0.9623 THz and 1.4079 THz, with maximum sensitivities of 1.7435 THz/RIU and 1.475 THz/RIU, and corresponding high figures of merit and quality factors, making it highly suitable for precise biosensing. A detailed parametric analysis confirms the influence of structural dimensions on absorption efficiency, while the equivalent circuit model validates the underlying resonance mechanisms. Furthermore, machine learning models are employed to predict absorption characteristics and support biosensing tasks such as virus detection, thereby reducing the need for repeated full-wave simulations. The proposed design effectively combines compact geometry, high sensitivity, excellent selectivity, and ML-assisted optimization, positioning it as a versatile candidate for next-generation THz biosensing and biomedical diagnostics.
The most versatile resource for storing energy is one that can rapidly charge or discharge while supporting the use of renewable energy. As renewable energy sources advance rapidly, batteries play a pivotal role in this progress. When integrating battery energy storage into a renewable energy system, it’s crucial to address the issue of battery degradation while implementing operational strategies. Furthermore, since solar irradiation varies due to changing cloud conditions, it can impact how batteries charge and discharge. This study focuses on investigating battery degradation and lifetime. Experimental work is being conducted with lead acid batteries connected to a solar photovoltaics system. The paper provides a detailed investigation of commonly used methods for predicting battery lifespan. It also analyzes aspects such as the effects of depth of discharge (DoD) and battery charge/discharge on temperature changes due to degradation. Using the coarse average approach, global battery aging, weighted Ah aging method, and RFC method, this paper estimates the DoD, temperature, life cycle loss (%), and lifespan and evaluates the extent of battery degradation. The battery lifespan is estimated using this method to be 8.42, 8.72, 8.33, and 8.93 years, respectively.
The world has faced a significant challenge since December 2019, when coronavirus (COVID-19) was found. Viruses of this type are causing pandemics all over the world right now. For this purpose, a biosensor is designed to operate based on metamaterial (MM) incorporated and can detect different coronaviruses. The proposed metamaterial absorber (MMA) includes two bands with perfect absorption characteristics and a narrow absorption bandwidth: 4.093 THz and 3.647 THz. The circuit model’s transmission line technique is another approach to verifying the absorber’s functionality. The proposed design consists of a square-shaped graphene ring (SGR) and a silicon-based square ring resonator (SSRR) to provide unique and narrow band absorption characteristics. Changing the graphene’s chemical potential suggests MMA tuneability and control capability. The suggested MMA can detect several coronaviruses because of its extremely narrow absorption spectrum behavior. It has unique features such as ultra-narrow absorption bandwidth, polarization insensitivity, and simplicity. The MMA is designed with a compact structure, good sensitivity (s), exceptional figure of Merit (FOM), and superior Quality factor (Q) values.